Avoid loose connection problems from punchdown keystones by using the Platinum Tools Cat 6 UTP Keystone Coupler Blackin your installation. Simply terminate your Cat 6 twisted pair cable with an RJ45 connector, then plug it into the back of this black female-to-female Keystone Coupler. Finally, snap the Keystone Coupler into your standard wall plate, surface-mount box, or unloaded patch panel for secure and reliable connections. A single Keystone Coupler is included in this bag.

Female-to-Female RJ45 Coupler    Cat 6 Network Standard    UTP Connection    Secure, Reliable Connection    Works with Most Plates, Boxes & Panels    Snaps into Place

Related Questions and Answers

Q: 1. Does this have a 5.5/2.5 mm size connector?

A: Yes, it has a 5.5 od and a 2.5 id.

Q: 2. Could this also be used to power a monitor?

A: Yes, as long as the monitor uses the NP-F battery, it will work perfect.

Q: 3. These adapter must to be conected to which power suply? thanks

A: The Relay Camera Coupler for Canon Cameras with LP-E10 battery gets its power from the Tether Tools Case Relay Camera Power System B&H # TECRUPS110 https://www.bhphotovideo.com/c/product/1235872-REG/tether_tools_crups110_case_relay_camera_power.html

Q: 4. Will this work with a G85?

A: According to Tether Tool's website, the G85 is supported. As of 10/12/2020, the current list of cameras support by the CRPBLC12 are: Panasonic LUMIX DMC-GH2, DMC-GH2H, DMC-G5, DMC-G6, DMC-G8, DMC-G80, DMC-G81, DMC-G85, DMC-FZ200, DMC-FZ300, DMC-FZ300GK, DMC-FZ1000, DMC-GX8, DMC-GX8H

Q: 5. What size barrel connector is used?

A: The Case Relay Camera Power System B&H # TECRUPS, (the product the Camera Coupler for Canon Cameras with LP-E12 Battery B&H # TECRCE15 connects to) has a barrel connector which is 5.5 mm outside diameter and 2.1 mm internal diameter.

Q: 6. Does this item have its own battery capacity to facilitate hot swapping? Looks like it doesn't...

A: ...you need also the relay for this item. The relay has its own battery!

Q: 7. Is there a difference in the function of the NTW USB 2.0 A/A Snap-in Keystone Coupler Jack and a Comprehensive USB A Male To A Male Adapter? Just need to connect the male end of two USB cables. There exists a significant price difference.

A: The two items will serve the same purpose.

Q: 8. On a Canon M5, you can't operate the camera without closing the battery door. As far as I can see, there is also no cable outlet of any kind. How is this product physically able to work?

A: You should be able to make it work with the M5 without keeping the battery door open. Canon sells a similar coupler to this for the M5 that plugs into the wall. Ours is meant to plug into a USB battery pack.On the bottom of the inside of the door, do you see a silver piece with a round hole? The version I've found has a number 3 on that rubber piece, but yours may be different. That rubber piece should pop out and you would plug the cable into the coupler through that hole.

Q: 9. Will this work with the Canon R5? If not which one will?

A: Yes it will!

Q: 10. is. this coupler compatible with the GH5mark 2?

A: No, the Tether Tools Relay Camera Coupler for Panasonic Cameras with DMW-BLF19 Battery is not compatible with the Panasonic Lumix GH5 II Mirrorless Camera (BH #PADCGH5M2). Instead you will need a dummy battery like the Kondor Blue DMW-BLK22 Dummy Battery to DC 1.35/3.5mm Coiled Cable (16 to 36"), BH #KODCBLK22.