Get the sound of a Carvin V3 100 W 6L6 amplifier head in your productions with the Overloud Carved Third Rig Expansion for THU Downloadby Overloud, a selection of guitar amp and cabinet emulations for use with the Overloud TH-U platform. This software models a metal-oriented amplifier with its own unique character.

The engineers captured this amp through different cabinets and pedals to extend the amp's sonic capabilities. Various microphones have also been used to give you multiple different sounds. There are 127 rigs are offered in this library.

Models Carvin V3 100 W 6L6 Amp Head    Metal-Oriented Tones    127 Rig Emulations in Total    Multiple Cabs, Mics, and Pedals    Requires TH-U or Editions

• EVH 5150III 4x12 loaded with Celestion G12EVH
• Engl 4x12 loaded with Celestion V60
• Custom Audio 4x12 loaded with Celestion Creamback 75
• Mesa Boogie 4x12 loaded with Celestion V30, V-Type, Lynchback, G12EVH, G12V Marshall Vintage, G12C
• Mesa Boogie 4x12 loaded with Eminence Governor, Scumback J75
• Marshall 4x12 loaded with Celestion G12T75, Creamback 65, Classic Lead 80
• Hughes&Kettner 4x12 loaded with Celestion G12M
• Friedman 4x12 loaded with Celestion G12M
• Soldano 4x12 loaded with Eminence Legend V12
• Bogner 4x12s loaded with Celestion V30, G12T75
• Krank 4x12 loaded with Eminence Texas Heat
• Mesa Boogie 2x12 loaded with Celestion V30
• Custom Audio 2x12 loaded with Celestion V30
• Mesa Boogie Oversized 1x12 loaded with Celestion C90
• Fender Bassman Cab

• Shure SM57, SM7
• Neumann U87, KM84
• AKG C414
• Sennheiser MD421, MD441
• Royer R121
• AEA R92
• Beyerdynamic M160
• Heil PR30

• MXR Wylde OD
• MXR Modified OD
• Ibanez TS9
• Mesa Grid Slammer
• Fulltone OCD

Related Questions and Answers

Q: 1. What benefit does this expansion unit provide over the Canon EU-V2 Expansion Unit?

A: The Canon EU-V3 Expansion Unit has a slimmer profile, lacks the audio controls of the V2, the V3 has more function buttons, and it has two different power options, 4-Pin XLR Power/ 4-Pin Hirose (12V), unlike the V2 which only has the 4-Pin Hirose (12V).

Q: 2. what.s the difference between Pocke Rig 2 and Pocket Rig 3 ?

A: The Edelkrone PocketRIG v3 refines that original design, adds new features. The most notable addition is the half cage which features a new set of movable mounting points to attach accessories. you will be able to attach lights, microphones, monitors, and more anywhere on the cage.

Q: 3. If a 25mm MFT lens (50mm FF equiv) is adopted to E mount, is the field of view or effective focal length changed?

A: The focal length of a lens never changes. The "equivalency" to 35mm is dependent on the camera being used. Therefore a 25mm MFT lens adapted to a Sony full frame camera would be the same as using a native Sony mount lens that has a 25mm focal length. But also due to the smaller image circle of Micro Four Thirds lenses, vignetting will likely occur on both APS-C and full-frame format sensors when using this adapter.

Q: 4. Does this come with a case?

A: A case is not included with the Cartoni Third Axis for Lambda 25.

Q: 5. What is it?

A: This is a kit which includes the following list of items: DJI Osmo Pocket Controller Wheel DJI Osmo Pocket Wireless Module DJI Osmo Pocket Accessory Mount Samsung 32GB microSD Card Limited 90-Day Warranty

Q: 6. Would this work with the Sony FS5? It's small and lightweight but the description only specifies DSLR cameras.

A: This combination is unknown. That being said, if it is made to be solid, it might be a very good, very compact chest support for the FS5.

Q: 7. Following up on my last Q. I believe all Olympus (and Panasonic?) AF lenses are "focus by wire". Is it physically possible to manually focus such lenses when mounted on this adapter? I would think not. If not, there are very few MFT lenses that can be used with this adapter. Correct?

A: If the Micro Four Third mount lens you use uses focus-by-wire, I do not believe it would allow you to focus the lens using the FotodioX Lens Mount Adapter listed above as I believe electronic communication is required for adjusting focus-by-wire lenses. However, if you have a full manual-focus lens or if your lens uses mechanical coupling for focus purposes, then those should offer compatibility with the above lens mount adapter.

Q: 8. Will work with a Sony a7r?

A: It works with the a7rII.

Q: 9. The in-body audio has been described as poor. How has the addition of the XLR inputs affected the audio quality overall?

A: We expect the DJI Ronin 4D Expansion Plate will greatly improve the Ronin-4D's audio support and quality when it arrives. As of today the DJI Ronin 4D Expansion Plate has not arrived in stock for testing at B&H.

Q: 10. What is in the Accessory Pack that comes in the box?

A: Drive keys and mounting screws.