Dual power outputs are included. One Cigarette connector and One Professional 4-Pin XLR connector are built-in to power two different devices simultaneously. A 6' 14 gauge superflex cable lead is supplied for the 4-Pin connection.

Related Questions and Answers

Q: 1. How long can a BMPCC4K run on this?

A: This is a 98Wh battery, which is around 7 times higher capacity than the LP-E6 batteries the camera normally uses. You should expect to get 5-6 hours out of this battery depending on the shoot conditions and settings you use.

Q: 2. I have an older Lowel iLight with the 4 pin connector. Will this battery work with my light?

A: It's hard to say with out knowing the power requirements of your specific light. The Bescor 12V Li-Ion Battery Kit for ENG Cameras and LED Lights outputs 12V via the 4-Pin XLR, so if your light can run off of a 12V power supply this kit would work. If you need more assistance determining the power needs of your light please email us at the following link. https://www.bhphotovideo.com/find/contactForm.jsp

Q: 3. I could not charge the battery by this one. Plug it to the wall outlet, the fuse burned out right away. What should I do ?

A: Replace the fuse and try again. If there is still a failure, replace the charger. If you continue to experience failure, you might have a totally defective recharging system, which would need to be replaced.

Q: 4. how long does a full charge last?

A: The battery is 98 watt hours. Divide the number of watts you are powering into that to determine the run time.

Q: 5. I have an OWL Pro camera that operates with a 12VDC power supply. Will this battery (with the DC Barrel Adapter option) work?

A: The Bescor 12V Li-Ion Battery Kit for ENG Cameras and LED Lights with 2.1mm DC Barrel Power will not work with the OWL Pro meeting camera. As an alternative, you could use the SmallRig VB99 Mini V-Mount Battery (99Wh, Black), B&H # SM3580, along with a 2.5mm DC power cable like the CAMVATE Right-Angle 2.5mm Male to 2.5mm Male Coiled DC Power Cable, B&H # CAC2371.

Q: 6. will it work with black magic cameras?

A: Yes it will work on the Black Magic Production camera as the camera has got a 12-30 V DC input. However you will have to change the XLR power plug on the battery pack, as the Production cameras DC-input is not an XLR input socket.

Q: 7. Will this power the GH4 YAGH Interface?

A: The YAGH operates on a nominal 12VDC current. That is what this battery provides. You are good to go.

Q: 8. Will this setup power two items? Like will the battery power one item and the car adapter charge the other? (I have two low-power LED lights I would like to power that would work with this connection).

A: Enter I wish I could give you a good answer but unfortunately when I ordered this product I received the wrong items. The light kit I was going to use this on was pretty lame too so I sent everything back and got an IKAN light kit. You cant use the 12v car adaptor with the IKANs but you can use some rechargeable batteries mounted to the back of the lights. This was a much better option for me and I am looking to get more because they have worked so well.an answer to this question.

Q: 9. Would this charger work with an NRG Varalux light with a 4 Pin XLR? I'm assuming any 4 pin XLR connector would work with it, but the comment about powers select ENG cameras & LED lights made me question that. Thank you!

A: I think so, as long as your light runs on 12v and has a 4 pin XLR connector. I'm using this battery to power a Panasonic GH4 - DMW-YAGH Video Interface Unit in the field. It works great for that and let me film all day on a single battery.

Q: 10. will it work with the new black magic URSA??

A: I bought this to light a custom made LED light. So I don't know about Black Magic camera. I do know it comes with 4pin XLR OUT, and it is rated at 12V. Don't know the power consumption rate of Black Magic. It may not last too long.