Ptzcam Ip Control Surface With Video Decoder

Product Code: eq93776
Availability: In Stock

$1,827.00 $2,484.72

Qty

8 reviews Write a review

Description
Reviews (8)

Control your PTZ cameras using IP communication with this handy PTZCam IP Control Surface with Video Decoderfrom PTZCam. The PTZ View offers 4D joystick and button control for up to 999 PTZ cameras with support for the VISCA control protocol over IP. It enables you to control the speed of your pan, tilt, zoom, and lock moves and incorporates a TFT LCD screen. It supports ONVIF communication standards, runs the open Linux operating system, and features built-in H.264/H.265 video decoders to view the active camera feed up to 1080p on the built-in 800 x 480 color display.

The controller offers camera select buttons, presets, knobs for pan/tilt/zoom speed control, iris buttons, and settings to control the finer settings on the PTZ cameras. It also features a key-touch beep feature that can be turned on and off. You can power the camera using a power adapter or via PoE (Power-over-Ethernet) on a supported network to save cable runs.

Open Box Products Have a Limited 1-Year Manufacturer Warranty Pan/Tilt/Zoom Camera Control VISCA/ONVIF Communication Protocols Control up to 999 PTZ Cameras LCD Preview Display, H.264/H.265 Decoder 4D Joystick, 1080p Maximum Resolution Key-Touch Beep Feature Power via PoE or Power Supply

Key Specs
Number of Supported Cameras	999 Channels via IP
Control I/O	1x RJ45 (LAN)
Controls	1x Pan/Tilt, Zoom, Focus Joystick 9x Camera Selection Button
Touchscreen	No
PoE Support	Yes
Power Consumption	>6 W
Security Lock Support	No
General
Number of Supported Cameras	999 Channels via IP
Supported Control Protocols	IP VISCA
Control I/O	1x RJ45 (LAN)
Controls	1x Pan/Tilt, Zoom, Focus Joystick 9x Camera Selection Button
Display
Native Resolution	800 x 480
Touchscreen	No
Power
PoE Support	Yes
Power Connectors	1x Barrel / Coaxial
Power Consumption	>6 W
Input Power	12 VDC at 2 A
Physical
Operating Conditions	22 to 87°F / -10 to 55°C
Storage Conditions	14 to 140°F / -10 to 60°C
Security Lock Support	No
Dimensions	11.7 x 8.3 x 4.67" / 29.7 x 21 x 11.87 cm
Weight	2 lb / 890 g
Packaging Info
Package Weight	3.345 lb
Box Dimensions (LxWxH)	13.4 x 11 x 5.9"

4D pan/tilt joystick, button control, and color LCD screen

Control up to 999 PTZ cameras

Preview single camera on 800 x 480 TFT LCD screen using video decoder and ONVIF communication

Supports preview for up to 1920 x 1080 resolution

Control speed of pan/tilt and zoom in/out; control focus and iris

VISCA-over-IP communication protocol

Power-over-Ethernet (PoE) support or power via power adapter

Key-touch beep feature

Related Questions and Answers

Q: 1. Will this work with a Tevo-vhd20n ptz camera?

A: The PTZCam PTZ View IP Control Surface with Video Decoder (B&H# PTS3IP) is not compatible, at least with current firmware, with the Tenveo TEVO-VHD20N as the PTZ View IP Control Surface with Video Decoder because the controller offers control through the LAN port (i.e., IP) and not through the RS232 port. Moreover, current Tenveo TEVO-VHD20N firmware does not offer control through the camera's LAN port (i.e., IP).

Q: 2. What is the maximum payload on the motor?

A: The weight limit of the PresenterTek PTZ Mover with IP Control is 20lbs.

Q: 3. Can this decoder receive streams from JVC GY-HC500 camera?

A: Yes it can.

Q: 4. Is it work over Internet? Then Please send me how it pair with its encoder.

A: Yes, this decoder is Wi-Fi enabled and can be accessed via web browser or iVMS 4200 client software. Detailed instructions can be found in this doc on pgs 13-20: https://us.hikvision.com/sites/default/files/ud05526b_baseline_user_manual_of_ds-6900udi_series_decoder_v2.1.0_20170713_0.pdf

Q: 5. Does the device accept HLS link from CDN and output HD/SD SDI?

A: this will decode standard RTP/RTSP, RTMP, and UDP and output an SDI signal

Q: 6. We've lost our church organist and are looking for a way to provide music during services. Is this item a way to do that?

A: No, The following unit is a video switcher that is used for production. It allows an end-user to switch between cams while in a live production.

Q: 7. Does having four inputs mean only four camera angles would be available for replay?

A: Yes, the Vizrt 3Play 3P1 IP Replay System with Control Surface supports 4 Cameras for recording and replay. During replay you can switch between any of the 4 cameras. You also have two outputs that could be used for Program and Preview, Clean and Dirty of any other combination.

Q: 8. What type of battery setup is required for remote field use?

A: This product uses a standard AC Power supply. You could look at something like the GOAL ZERO Yeti 400 Portable Power Station to operate it in the field, BH #GOGZ23000. https://bhpho.to/2TRzfjl

Q: 9. Hi, this works for the OBSBOT Tail AIR?

A: Yes, the PTZCam View NDI PTZ Controller with NDI|HX Preview and Joystick Control works with the OBSBOT Tail AIR.

Q: 10. I have an AXIS P5655-E Network Camera, can I put in the IP of the camera into the NVD-35 and it can decode to SDI?

A: Yes, as long as the encoded signal coming in via IP is among those supported by the device.

anyonymous	22/08/2024
[IP VISCA] This device works great when used with the Muxlab Extender. I came right out of the extender into a 10 port gigabit POE switch, and ran 5 monitors up to 200ft from the switch to each decoder. You do need a decoder for each monitor. Since the switch was POE I did not have to use the provided power supply for any decoder 5

chaim	08/08/2024
[1x RJ45 (LAN) ] very good product 5

Naldo	01/08/2024
[800 x 480] Please tell me, when this product will be available in store in NY. BHERINGER X-TOUCH COMPACT Universal Control Surface by Behringer Thank you, for your help. Naldo Bueno from Brazil 5

Joshua	18/07/2024
[IP VISCA] This decoder worked out great for what we were needing. 5

Wilfried	17/07/2024
[IP VISCA] Thank you, the Wirecast Control Surface is a great piece of hardware that makes distance learning much easier. 5

Paul	05/06/2024
[12 VDC at 2 A] A must have if you're doing serious audio work in Resolve. The faders have a nice feel and the jog/shuttle wheel is great. This has far more capabilities than I've even begun to explore. 5

Drew	22/05/2024
[12 VDC at 2 A] It may be a tad on the expensive side(more than the Wirecast program itself) but for us running a two and soon-to-be 3 camera live stream for our church, this is simply a must-have! Our workflow has decreased dramatically and having the full controls of the Wirecast at your fingertips there is no choice. Get this switcher! 5

Sheldon	18/04/2024
[1x RJ45 (LAN) ] Have only used the X-Keys Controller for about a week now but it has greatly improved the workflow. Set up was as easy as it gets, just plug and play. Also, I really like the fact that it auto colour codes each channel strip in Wirecast. So far an awesome product! 5