The white Shure Frequency Cap for DL4 and DH5 DuraPlex Microphones is offered in a pack of 5 and fits over the mic capsule to boost approximately 3 to 4 dB in the 10 kHz range—adding presence to speech and vocals for improved clarity and intelligibility when required. The cap fits the DL4 lavalier and the DH5 headset microphones.

Boosts High Frequencies for Clarity    Adds 3 to 4 dB in 10K Range    Fits DL4 DuraPlex Lavalier Mic    Fits DH5 DuraPlex Headset Mic

Related Questions and Answers

Q: 1. Does this windscreen show in the camera frame on an iPhone in wide angle view?

A: Since the microphone is on the opposite end of the phone, the Shure Windjammer for Shure Motiv MV88+ & MV88 Digital Stereo Microphones should not interfere with or block the camera.

Q: 2. Will this fit the new MV88+ microphone by Shure?

A: Yes it will

Q: 3. What diameter mic head will these work with? Also, what is the length?

A: Exact specs are not provided by the manufacturer, but the On-Stage Foam Windscreen for Handheld Microphones is meant for typical handheld microphones like the Shure SM58 or the SE V7.

Q: 4. Will this work on the rode wireless go 2?

A: Yes you can use the On-Stage ASWS58B5 windshield with the Rode Interview Go and Rode Wireless Go.

Q: 5. Does it fit the Rode Lavalier Go?

A: No, I don't think the Shure Snap-Fit Windscreen for DL4 and DH5 DuraPlex Microphones is going to work with the Rode Lavalier GO because the microphones that this windscreen is designed to fit are flat and the windscreen snaps on. As a better option for the Lavalier GO, you can use the WindTech Windscreen- 3/16" - 3-Pack, White (B&H # WI2300PW).

Q: 6. I have old 819 floor mic that has very low sensitivity. Desire to use the new preamp but need this cable to connect it to the floor mic 3 pins. Is the new preamp compatible with the old mic? Looking forward to a boost in gain and may be a lower noise? Please advise do expect a wiring change may be needed.

A: I believe it is, same pin type and there wouldn't be any need to wire differently. To be sure I would contact Shure (no pun).

Q: 7. Does it come with the screws?

A: No, the Shure RPM602 Switch Cover Plate does not come with screws. It attaches to the SM7A and SM7B Broadcast Microphones using the existing screws on the microphone.

Q: 8. Does it have a 3.5 connection? I need a new mic for another brand transmitter?

A: The MINIFUR-LAV by Rode is only a windshield. No mic included. The Rode Lav however which is pictured for reference, features a proprietary connector that allows you to choose the proper connection for a particular transmitter or application. Connectors are available for most popular transmitter brands as well as hardwired XLR and standard 3.5mm. For available connectors see the following link: http://bhpho.to/2aMB6xW

Q: 9. What is the inside diameter of this screen?

A: Unfortunately Shure has not provided a spec for the internal diameter of the Shure Foam Windscreen for DL4 and DH5 DuraPlex Microphones.

Q: 10. Do these fit the Samson AirLine Micro?

A: Yes, the On-Stage ASWS20N10 Windscreens should fit on the Samson AirLine Micro AH2 Wireless Earset Transmitter.