The K 5 L-TA3 LEMO to Mini XLR Cable from Schoeps is a 16' long cable designed to work with CCM L series microphones, including the CCM 4 and the CMC 1 L. It features a LEMO connector on one end and a Mini-XLR 3-pin connector on the other end.

Works with CCM L Series Microphones    1 x LEMO Connector, 1 x Mini XLR 3-Pin    Cable Length: 16'

Related Questions and Answers

Q: 1. What is the difference between the KA 600i and KA 600 cable?

A: KA-600i has a TRRS connector for smartphones and tablets. KA-600 has a TRS connector for DSLR cameras, camcorders and audio recorders.

Q: 2. To get additional length to the cable can I add an additional cable such as another XLR cable or another 3.5mm cable? If so will it affect sound quality?

A: You would need to do a calculation based on the electrical characteristics of your cable and the length to ascertain if the loss will be noticeable. But realistically your loss should be negligible using most balanced. I suggest a star quad type cable (4 conductor, shielded individually).

Q: 3. Does anyone have direct experience with this the KA 600i working with an iPhone 11 Pro? iPhone 11 Pro to XLR Mic?

A: You will need to use the adapter below to plug this into your iPhone 11. https://www.bhphotovideo.com/c/product/1280795-REG/apple_mmx62am_a_lightning_to_3_5mm_headphone.html?sts=pi-ps&pim=Y

Q: 4. How long are these cables ? 18” & 24” ?

A: The TFX-8 cable measures 21 inches in length.

Q: 5. Can I use this to connect the 2 line XLR outputs from a Sound Devices Mix Pre-D to the Sound Devices 633 TA3 inputs?

A: The Remote Audio CA744INL Dual XLR to Dual TA3 Channel 3/4 Input Cable can be used to connect the 2 line XLR outputs from a Sound Devices Mix Pre-D to the Sound Devices 633 TA3 inputs.

Q: 6. Will this work with a sony pcm m10 and electro-voice 635A?

A: Hi Ben,Yes, this cable will work with the PCM M10 and Electro-voice 635A.thanks for the question,Franz

Q: 7. What is the pinout on this minijack ?

A: This is a phone connector. I use this to connect my Lapel mic to my iPhone and it works good. You can search for 3.5 mm 4-conductor TRRS phone connector , it will give you all the details of the pin out. Hope this helpsAmar

Q: 8. Will this give the proper output level from a mixing console line level aux output to an iOS input?

A: The Sennheiser KA600i is not designed to connect line level devices to a smartphone. A hardware interface would be recommended for this application.

Q: 9. Hi it says it is for Red and Alexa but could it work on a ZCAM E2-S6? Thank you.

A: The connection on the Z-Cam E2-S6 is 5-pin lemo.. We can only confirm that the adapter has been tested with the RED cameras listed. However, the DigitalFoto Solution Limited 00B 5-Pin LEMO to Dual 3-Pin XLR Female Adapter with Audio Cable should work with the Z-Cam E2-S6 as well.

Q: 10. Hi! I would like to use this with an AVX microport receiver connected to an iPhone (acting as recorder). This haven't worked so far. The AVX puts out the max four bar level. What is the problem?

A: This adapter works with every iPod I have going back to one made in 2008. Audio levels are consistently good. I'll bump up the audio in post production at times. Use a dynamic with a hotter output (I use a Shure SM 63 or VP 64) to get higher input levels on your recordings.