Quickly expand your wired Gigabit network to reach across your home by including the TP-Link AV1000 Powerline Ethernet Adapter Add-Onfrom TP-Link AV1000 Powerline Ethernet Adapter Add-Onin your existing powerline Ethernet configuration. This HomePlug AV2 compliant module plugs into available two-pronged US wall outlets to integrate into an existing AV1000 Powerline Ethernet system using TL-PA7017 adapters. With it, you can reliably transfer data across up to 984.3' using your home's electrical wiring. Connect it to compatible devices through its Gigabit Ethernet port, then press the pairing buttons on each of the adapters to link them. Your data connection is secured with 128-bit AES encryption. The AV1000 Powerline Adapter supports the IEEE 1901, 802.3/3u/3ab standards and is designed to work with Windows, Mac, and Linux computers.

1 x AV1000 Powerline Adapter Module    1 x Gigabit Ethernet Port    HomePlug AV2 Compliant    Up to 984.3' Range    IEEE 1901, 802.3/3u/3ab Standards    128-bit AES Encryption    Dedicated Pairing Button    Power Saving Mode    Works with Windows, Mac, and Linux

The AV1000 powerline modules are designed to automatically switch from its regular "working" mode to "Power Saving" mode when they're not in use, which can reduce energy consumption by up to 85%.

Related Questions and Answers

Q: 1. Does this work with 220 W power?

A: Yes, our Powerline networking products support a voltage range of 100 – 240V 50/60Hz. Regards, TP-Link Support

Q: 2. Is this TP Link adapter compatible with a Net Gear Powerline 1000 system?

A: Yes, this TP-Link TL-WPA7617 AV1000 Powerline Access Point Module is compatible with the Netgear PL1000 Powerline 1000 Network Adapter Kit. It is compatible with all HomePlug AV and AV2 Standard Powerline adapters.

Q: 3. What is the voltage on these units 110V or 220V or both? (international)

A: The TP-Link AV1000 Powerline Ethernet Adapter Add-On Unit BH #TPTLPA7017 is dual voltage and works on 100-240V.

Q: 4. 500Mbps? Try 50... setup was a breeze, and they work great. Except I am getting between 40 and 50 Mbps max. This was tested on both a laptop and a PS4 Pro. Our internet package is 100Mbps+, and I get that over our iPhone/iPad's wifi and when hardwired to the router on my desktop. Only bought these adapters because of the terrible wifi radio in the PS4. 40-50 is still a huge improvement, but it's a tenth what the box says. Any suggestions on getting that raised a bit?

A: While the adapter itself is capable of speeds up to 500Mbps, your speeds are limited by the 1 x 10/100 Mbps Ethernet Port. The only way around this limitation is to purchase an adapter with a gigabit ethernet port.

Q: 5. windows 11 compatible?

A: The TP-Link TX401 10G Ethernet PCIe Adapter is compatible with Windows 11. You can get the driver from the manufacturer website.

Q: 6. is it available in European plug ?

A: The plug on this model is designed for use in the United States; however, the TL-PA4010 Kit supports 100 - 240V 50/60Hz, so you can use them as long as you have the appropriate socket adapter. Regards, TP-Link Support

Q: 7. Will TX401 PCIe Nic card work in an HP Z2 Tower? BH #HEZ2G9T6H907.

A: Yes, the TP-Link TX401 10G Ethernet PCIe Adapter is compatible.

Q: 8. Can I add this on to a pair of AV600 adapters?

A: Yes, the TP-Link AV1000 Powerline Ethernet Adapter Add-On Unit is compatible with the TP-Link TL-PA4010KIT AV600 Nano Powerline Adapter Starter Kit.

Q: 9. How many nodes can there be.

A: There is no limit to the number of Powerline network adapters that can be used in one building. You will only be limited by the number of available AC outlets.

Q: 10. Can I pair more than two of these, say one at my router paired with three remote?

A: Max of 8 on one network (1 at router & 7 remote)