Kupo Vesa Monitor Mount Plate 5/8" Baby Pin

Product Code: eq94322
Availability: In Stock

$149.85 $199.30

Qty

20 reviews Write a review

Description
Reviews (20)

The Kupo VESA Monitor Mount Plate 5/8" Baby Pinfrom Kupo VESA Monitor Mount Plate 5/8" Baby Pinincorporates a 4" long, fixed 5/8" baby pin for mounting your monitor on a grip stand. This plate is compatible with both 75 x 75 and 100 x 100mm VESA patterns and is constructed from black-coated aluminum. A collared design prevents the plate from slipping completely through your grip stand.

75 x 75 & 100 x 100mm VESA Plate VESA to 4" Fixed 5/8" Baby Pin Use to Mount Monitor on Grip Stand Collared Mount, Black Aluminum Build

Key Specs
Mounting	Stand Mount: 1x 5/8" Stud
Parameters
Color	Black
Pan	Yes
Tilt	No
Roll	No
Mounting
Mounting	Stand Mount: 1x 5/8" Stud
VESA Mounting Pattern	75 x 75 mm, 100 x 100 mm
General
Materials	Aluminum
Dimensions	4.92 x 4.84 x 4.33" / 12.5 x 12.29 x 11 cm
Weight	7 oz / 200 g
Packaging Info
Package Weight	0.525 lb
Box Dimensions (LxWxH)	12.25 x 7.7 x 4.55"

For any monitor with 75 x 75 or 100 x 100mm VESA mounting

A 4" fixed 5/8" baby pin mount enables you to easily mount your monitor on a grip stand

A collared design prevents the plate from slipping completely through the grip head

Four M4 screws are included for attaching your monitor to the plate

Constructed from lightweight, black-coated aluminum

Related Questions and Answers

Q: 1. So will this mount on a C-Stand or do I need an adapter for this?

A: This can mount on the 5/8" pin of a C-stand.

Q: 2. Is the Kupo Baby Drop Down Pin made of steel or aluminum?

A: Hi,Made with steel.Regards,Will H.

Q: 3. Is this mount compatible with the smallhd 4k 13" monitor?

A: Yes, the E-Image VESA to 5/8" Baby Pin Adapter Female is compatible with the SmallHD Cine 13 UHD 4K High-Bright Monitor.

Q: 4. What size/thread is the hole in the top (male) baby stud?

A: It is not threaded.

Q: 5. How does the tilt function work? Is it just spring/friction or is there a way to lock it into position? Thanks!

A: The E-Image VESA to 5/8" Baby Pin Adapter Female has tightening screws that would allow you to lock the position.

Q: 6. Can this rotate to alternate between mounting the monitor vertically and horizontally without an extra adaptor?

A: Hi,If you place it on top of a stand with a baby mount you will not need anything else to mount the arm and monitor. If you mount it on the side using a clamp system you may need a few more accessories as you will have to worry about clearance with the monitor.I hope this helps.Regards,Will H

Q: 7. Can this fit on a standard lightweight light stand baby pin or just a longer c-stand baby pin?

A: The Wooden Camera Ultra Quick Release Articulating Monitor Mount is designed to work with a C-Stand baby-pin. The Wooden mount would also work with many light stands with a 5/8 connection. However because a C-Stand is a much stronger option we recommend using a standard C-Stand. Works with - C-stand or stand/mount with male 5/8" Baby pin.

Q: 8. Can this be used in a way where you could slide it along the track to reposition as needed?

A: The Kupo Strut Channel Adapter with 5/8'' Baby Pin is meant to be fixed within the strut channel, so repositioning it would involve unscrewing the bolt that secures it.

Q: 9. I don't see how to lock the tilt in the pictures. Is there a way to do this? Do you need a tool or by hand?

A: Yes. Tilt is all based on tension control which is adjusted by two Allen key screws at the bottom of the next of the tilt.

Q: 10. Can this drop down pin be used with the rovelight xplor?

A: This drop down pin can be used with any light that uses a baby pin 5/8".

Gio	27/09/2024
[Black] It's holding a 18lb monitor for a fraction of the price of the competitors out there. 5

Raven Whitefang	18/09/2024
[0.525 lb] I have a Samsung monitor and an Asus. The Samsung didn't have a VESA mounting setup and I needed a way to mount it to a two monitor mount. The Mount-It bracket was a little confusing at first to get onto the monitor but once I figured it out it's worked great. 5

Mathew	13/09/2024
[Aluminum] I used this to make a Courtesy Table. You take a short C-Stand like a Gary Coleman, a Pancake Apple Box, and a Baby Receiver Wall Plate and put them all together to make a Courtesy Table. If I was a Grip, the first thing I would do is make a Courtesy Table for the Director and put it next to his chair; I would bet that you would be hired again! 5

Daniel	29/08/2024
[Black] Have used a cuple of these on set for client monitors. Light, easy to pack and you can separate easily at the joint if needed due to the silicone retainer. 5

Daniel	28/08/2024
[Aluminum] We had recently purchased a TV stand that supported 200x200 VESA and our TV was 100 x 200 VESA compatible ONLY. This allowed a nice and easy conversion to use the TV stand and was a great savior! 5

Robert	06/08/2024
[Aluminum] This is by far the best monitor mount I've used. I previously thought the Matthews mount was the best, but this is more compact, easier to adjust, but just as rugged! 5

Corey	03/08/2024
[Black] So far this seems to be a solid option for mounting a monitor. I can see how this would come in handy in for productions use in a video village or setting up a production monitor on the fly. I’ve opted to use it to raise the level of my monitor for a standing desk to bring my monitor to eye level and I’m quite pleased with it and the stability. 5

Eric	19/07/2024
[Black] good redesign. I have the old one as well. 5

Francis	12/07/2024
[0.525 lb] Very strong and well built, I've found I can put a stream deck on the plate side with some extra magnets and the spigot end into a Impact Rapid Baby to 3/8 and a solution9 arm and mount on desks etc, great unit 5

Clifford	06/07/2024
[Black] If you want to mount a monitor at a shoot this is the strongest cheapest option works with any decent c stand. I combined it with The Mount-It! VESA Mount Adapter Plate Monitor/Extender Conversion Kit we have 3 55 inch monitors on c stands as part of a set it just works well and is strong. If you want a great mobile mounting set up get the wooden monitor mount. These are real products not toys. I tried others that work but this is the best cheapest and strongest providing you have real stands made by avenger or Mathews 5