Xlr Female To Right-Angle Xlr Male Mic Cable 25'

Xlr Female To Right-angle Xlr Male Mic Cable 25'

Product Code: eq94588
Availability: In Stock

$209.85 $295.89

Qty

18 reviews Write a review

Description
Reviews (18)

Achieve clarity with high noise cancellation and reduction of RF interference in the studio or onstage with the Cable Techniques SSX-SR-25R, a premium, balanced microphone cable handmade with genuine Mogami Neglex W2549 cable.

The 25' cable is terminated with a straight XLR-3 female Neutrik XX Series connector (with a red ring) at one end and a low-profile, right-angle XLR-3 male connector (with a red cap) at the other. You can adjust the low-profile XLR cable outlet orientation to fine-tune it to your exact needs with a 120° swing.

A Cable Techniques Rip-Tie hook-and-loop fastener cable wrap is included. The cable is assembled in the USA using the highest-quality components.

For Stage and Studio Use Handmade, Premium Mic Cable Mogami Neglex W2549 Cable Straight XLR-3 Female Low-Profile, Right Angle XLR-3 Male Red Cap/Ring Assembled in the USA

Parameters
Connector 1	1x XLR 3-Pin Female Straight
Connector 2	1x XLR 3-Pin Male Right Angle
Cable Length	25' / 7.6 m
Connector Brand	Neutrik
Wire Gauge	22 AWG
Color	Red
Packaging Info
Package Weight	1.02 lb
Box Dimensions (LxWxH)	9.9 x 7.4 x 1.3"

Related Questions and Answers

Q: 1. How long is this cable?

A: It is 6.7" long. (170 mm.)

Q: 2. What's the purpose of this adapter?

A: This adapter is made specifically to adapt a SmartLav+ or similar mic made for mobile devices, and allow it to connect to a camera or any other device with standard TRS 3.5mm mic input.

Q: 3. Do I need this adaptor to connect a Rodelink receiver to my zoom h5?

A: Also, to connect your Rodelink receiver, you will need a Kramer 3.5mm Male to 3.5mm Male Stereo Audio Cable (25') you can find here on B&H, or something similar, to channel your data from the receiver to the recorder.

Q: 4. What's the difference between this adapter and the SC4 version?

A: Rode SC3 is for converting 1/8'' TRRS to 1/8'' TRS. Rode SC4 is for converting 1/8'' TRS to 1/8'' TRRS.

Q: 5. To what length does it stretch without damaging it?

A: The Sennheiser CL 35-XLR Right-Angle Locking 3.5mm TRS to XLR Male Coiled Output Cable can stretch to about 22" safely.

Q: 6. Can anyone tell me how long the actual cable is?

A: The Deity Microphones RX-Link Locking Right Angle 3.5mm TRS Male to Right-Angle XLR Male Cable is 40cm (15.75 in) long.

Q: 7. Hi, i want to use this as a line-in cable to connect the output feed from a mixer into my android/iphone phone, so i can send mixer sound to my phone and stream it over facebook live, can i do it with this adaptor?

A: Hi Maguel,I bought this to adapt to TRS to TRRS, works great.. Make sure you don't get scratchy connector noise in your feed... It usually comes from connectors not being tight.

Q: 8. When plugged into a MixPre 3 II will I still be able to close the sides of my Stingray bag?

A: If you have a little bit of space between the end of the MixPre 3 II and the end of your bag, then you will be able to use the Sennheiser CL 35-XLR Right-Angle Locking 3.5mm TRS to XLR Male Coiled Output Cable without any problems.

Q: 9. Can this be used to go from the XLR outputs on a mixer board to the rode wireless go 2 TX unit inputs

A: I'm sorry, but the Cable Techniques 3.5mm TRS Right Angle to Two 3-Pin XLR Male Tape Output Y-Cable Adapter that you asked about would not allow you to output from a mixer into a wireless transmitter. Most mixers will have XLR male outputs, so you will need female XLR connectors on the cable. Additionally, the Rode Wireless Go II transmitter will only accept input from a mic level source. The cable that I am linking below has the correct gendered connectors, and also has a built in attenuator to lower line level to mic, so that you can successfully send the stereo line signal into the transmitter: https://bhpho.to/3IdRNCf

Q: 10. Can I use this for plugging my trrs headphones on a regular trs output device?

A: Yes, the Rode SC3 3.5mm TRRS Female to 3.5mm TRS Male Adapter can be used to convert the TRRS plug on your headphones to TRS to enable compatibility with the standard TRS audio output on a device,

jeff9329@	17/09/2024
[Red] This is a great quality coiled XLR cable. It is about 6 to 18 length. For camcorder applications, be aware that there are 2 90 degree connectors which can make the camcorder side connection difficult or impossible because of the 90 degree connector. If you need 2 90 degree connections on a short and compact XLR cable, this is perfect. 5

Antonio	16/09/2024
[22 AWG] Good 5

John	02/09/2024
[1.02 lb] It does what you need it to do....great quality 5

Light	23/08/2024
[1.02 lb] Needed to bring XLR audio into our Blackmagic ATEM Extreme - perfect fit, perfect audio, lost the hum of the adapter setup we were using. 5

brynmore	16/08/2024
[Red] Use this on my DSLR rig to go from shortgun mic to Marantz. I can now keep everything clean and tucked. Perfect addition 5

anyonymous	14/08/2024
[Neutrik] Worked perfectly. Used it to plug my P.C. into as soundboard. 5

Paul	21/07/2024
[Neutrik] I used this product to power my Black Magic Ursa Mini directly from the Ronin. It worked a charm. Not only do I have the extra room for tilting the camera, but it saves on weight from not having to attach the V lock battery. 5

anyonymous	09/06/2024
[22 AWG] It's hard to find good cables like this with male XLR and mini-jack. The cable comes with a Velcro tie, which keeps it neatly rolled. My only criticism is that the packaging was somewhat difficult to remove. 5

Maurice	09/06/2024
[22 AWG] In Musical Theater 5

Ryszard. S.	28/05/2024
[22 AWG] I did purchase two of this cables to connect my monitors to Liquid Saffire 56 interface. Mogami never disappoint me, all cables in my studio are Mogami. The only MIDI cable I use Comprehensive because Mogami don't make MIDI. 5