Impact Bhe-102 Heavy-Duty Flex Arm For Clamp

Impact Bhe-102 Heavy-duty Flex Arm For Clamp

Product Code: eq9483
Availability: In Stock

$80.85 $105.11

Qty

19 reviews Write a review

Description
Reviews (19)

This Impact BHE-102 Heavy-Duty Flex Arm for Clampis ideal for supporting small lights, reflectors or other items up to 1.1 lb . Made of flexible aluminum, the 18 mm diameter arm measures 21.65" long and can be twisted into configurations that would be impossible with a jointed articulating arm. One end of the arm has a 3/8" female tapped hex stud to prevent torsion in the Super Clamp. The other end terminates in a 1/4"-20 screw on a 5/8" stud.

Aluminum and Brass Construction 21.65" Long 1.1 lb Load Capacity 5/8" Hex Stud with Female 3/8" Tap 5/8" Stud with 1/4"-20 Screw

Key Specs
Load Capacity	1.1 lb / 0.49 kg
Connections	1 x 5/8" Male Hex + 3/8"-16 Female Thread 1 x 5/8" Male Stud + 1/4"-20 Male Thread
Length	21.65" / 55 cm
Parameters
Connections	1 x 5/8" Male Hex + 3/8"-16 Female Thread 1 x 5/8" Male Stud + 1/4"-20 Male Thread
Construction Material	Aluminum, Brass
Length	21.65" / 55 cm
Width	0.71" / 18 mm (Rod Diameter)
Weight	1.57 lb / 0.7 kg
Packaging Info
Package Weight	1.54 lb
Box Dimensions (LxWxH)	24.05 x 1.55 x 1.3"

Related Questions and Answers

Q: 1. How would this compare to the equivalent manfrotto one as far as stability and durability?

A: Impact can take more payload and weighs less than the same Manfrotto version, however it could be said that the Manfrotto is built better or works smoother, your mileage may vary with that however. Stability/payload wise it seems Impact is the way to go.

Q: 2. Is the 5/8" pin with the 3/8" female end a 16 thread?

A: Yes on one end it's 3/8 & the other end 1/4

Q: 3. what would i need to use this with a shock mount ?

A: Please contact live chat as we need more detailed info.

Q: 4. I want to use with a LED monitor that weighs in at 1lb 7 ounces and a super clamp attached to video tripod leg. I don't like the hot shoe mount that came with the Elvid Fieldvision monitor. Do you think this would work?

A: That will be a little heavy for this, unless you plan to have it point straight down. I don't think it will maintain it's position with that much weight on it.

Q: 5. I want to use this flex arm with a flat clamp like Pedco UltraClamp Aluminum Support Clamp. I need to clamp onto a 3/8 flat piece of metal and have a flex arm from there. Is there a way? (13)Pedco UltraClamp Aluminum Support Clamp

A: I don't understand what your trying to do? I found that the arm was not strong enough to hold a light up. I have Alien Bee's they are to heavy. Hope this helps

Q: 6. Does it swivel or rotate?

A: It really does both. It can do full 360's but you have to watch the locking wings because they get in the way

Q: 7. Is it an option to have both end pins a 1/4" female thread?

A: No, the Impact 3 Section Articulated Arm without Bracket only comes with a 1/4 female thread on one side and 3/8 inch thread on the other. There are adapters but it depends on what you are attaching to it. this is one adapter of many, https://bhpho.to/3PBdz9N.

Q: 8. How can I mount this unit to a table? Super Clamp won’t work. Need a permanent mount.

A: If you purchase the Impact Wall Plate with 5/8" Locking Receiver, B&H # IMSRP123P • MFR #SRP-123P, and install it onto your table, then you should be able to install the Impact 3 Section Articulated Arm without Bracket on your table. https://bhpho.to/36YUojP

Q: 9. does this come with a table mount or table clamp?

A: A Superclamp is not included.

Q: 10. Is arm length adjustable?

A: Yes by sliding the arms through the knuckles.

James	25/09/2024
[1.54 lb] Excellent accessory. Well made. Great value. To support lighting modifier. 5

mak	17/09/2024
[1.54 lb] Heavy duty is right. I bought this for use with my Alien Bee strobes and it has more than enough strength to hold the lights in any position hanging from walls, raters, etc. (with clamp, bough separately) 5

Leonard	25/08/2024
[Aluminum, Brass] Needed a pair of these to hold strobes or LED lights for use with a microscope. They are attractive, of good quality, and quite strong although easily adjustable. Much better than the Plamp type holders for my purposes. 5

ScottM	24/08/2024
[1.54 lb] This flex arm does pretty much as advertised. Paired with a super clamp, it holds my small speed light firmly in place. Well made and should see years of service. 5

Mel	14/08/2024
[Aluminum, Brass] I bought this for a 19 inch ring light. Unfortunately, it is not sturdy enough and cannot hold the weight 5

Javier	14/08/2024
[1.54 lb] A very practical solution ... 5

Alfonso	15/07/2024
[Aluminum, Brass] its pretty sturdy, can hold its weight pretty well. 5

Chris	08/07/2024
[1.54 lb] I know it said heavy duty in the title so I should have expected it, but this thing is REALLY heavy duty. While I haven't tried yet, I think you could easily mount a DSLR with lens to this for remote shooting or whatever. It's solid and good-quality. 5

Walter	24/06/2024
[1.54 lb] If you need to place a small strobe in just the right spot without the support moving, this is the correct tool. 5

Matt	18/06/2024
[1.54 lb] Acquired this to hold lightweight accessories (cards, reflectors)on a light stand or c-stand. Manfrotto mini-clip is attached to one end. 5