The K-Tek KP10VCCR Mighty Boom Graphite Boompole 10.3'is a 5-section boompole that extends to 10.3' and collapses down to 38.5". Lightweight (at 2.4 lb), it features five sections made of wide graphite tubes designed to increase the stiffness and optimize handling balance. The result is quicker cueing and better user control of the microphone.

The KP10VCCR's removable headpiece allows for cable reconfiguration without any soldering required. The top attachment is a 3/8"-16 male thread. Included is a coiled cable with a right-angle, 3-pin XLR female connector and a KPCCR bottom module with 3-pin XLR male side exit and rubber bumper.

The locking collars feature a thick yet smooth surface allowing for a more subtle gradual extension of each section. The anodized, oval divets with exterior dimples provide a great grip and smooth feel when opening and closing each collar. The finish between the tubes allows for the sections to sleekly glide open and closed. Additionally, the Mighty Boom poles are hand-burnished to diffuse handling noise.

To allow for quick conversion when working in the field, the KP10VCCR is compatible with the KPTA Transmitter Adapter Module and KPTF Flow-Thru Module. Mighty Boom boompoles are made in the USA.

5 x Sections, Graphite, Extends to 10.3'    Collapses to 38.5"    Coiled Cable, Right-Angle XLR Connector    Bottom Module with XLR Side Exit    Removable Headpiece    Strong, Rigid, Lightweight at 2.4 lb    Sure-Grip Oval Divots    Rubber Bumper Bottom    Made In the USA

• Five sections made of strong and rigid graphite tubes
• Extends to 10.3'
• Collapses down to 38.5"
• Lightweight at 2.4 lb
• RF-shielded coiled cable with right-angle, 3-pin XLR female connector
• KPCCR bottom module with 3-pin XLR male side exit, rubber bumper bottom
• Removable headpiece
• Top attachment with 3/8"-16 male thread
• Sure-grip oval divets
• Hand-burnished to diffuse handling noise
• Compatible with KPTA Transmitter Adapter Module and KPTF Flow-Thru Module
• Made in the USA

Related Questions and Answers

Q: 1. Does it has an internal cable?

A: Yes, the K-Tek KA-113CCR 6-Section Articulated Boom Pole does have an internal XLR cable.

Q: 2. The description says, "The Boompole Kit Bag from K-Tek is a duffel style bag for transporting boom poles", but going only by the shown pictures, it does not appear this boompole will fit in this bag. Does it indeed fit?

A: Yes it will.

Q: 3. What is the fully close length?

A: two foot, five inches or 0.7 meters

Q: 4. How could I replace the internal XLR cable?

A: Please contact K-Tek directly for repair: K-Tek: Tel: 760-727-0593 Email info@ktekpro.com

Q: 5. Is this compatible with the Rode VideoMic Pro Compact Shotgun Mic?

A: The rode video mic pro is a shotgun mic designed for dslr shooters. It has a mini jack for hooking into the mic jack of a dslr type camera and a cold shoe for fitting into the top of a dslr. You wouldn't want to use it on this boom pole. What you want is the rode NTG series shotgun mics. These are the video professional grade shotgun microphones, the NTG-1, NTG-2, NTG-3, NTG-4, and NTG-8. I personally use the NTG-1, and it has served me well for almost 8years. It requires phantom power from whatever recording device you are connecting it to but it is a great mic. You'll need a shock mount though to fit it onto the boom pole. I would suggest the Rode SM4 shock mount. Or if you want protection from wind look no further than the rode blimp and windscreen system. With this kit you are good to go for all indoor and outdoor shooting. Hope this helps!

Q: 6. Does it has an internal cable?

A: No, the K-Tek KA-113 6-Section Articulated Boom Pole does not have an internal cable. The K-Tek KA-113CCR 6-Section Articulated Boom Pole would be the version with the internal cable, BH #KTKA113CCR (https://bhpho.to/3RX32qD).

Q: 7. what c-stand and clamps do I need with the K-Tek KE-89CC?

A: For the C-stand, you can use any model, just be sure to select one that accommodates the height you require. Any standard C-stand and boompole holder can be used. For a stand that extends 10 feet, you may like the Impact Turtle Base C-Stand - 10.75' - Chrome (B&H# IMLSCT40M). The same stand is available in different heights. For an easy to use boompole holder, consider the Auray Boompole Holder and Grip Head Kit (B&H# GBBPHK) or BoomMate Boompole Holder and Grip Head Kit (B&H# BOBPHK).

Q: 8. what is the total length?

A: The KE-144 has a collapsed length of 3'3 (99 cm) and an extended length of 12' ( 366 cm).

Q: 9. Will this mount the Auray DUSM-1 shockmount?

A: The Auray DUSM1 shock mount features a 3/8 female threading compatible with the K-Tek boom poles.

Q: 10. The screw at the top of my boom pole has broken off in the shock mount. Is it possible to buy a replacement top screw for this boom pole?

A: K-Tek does offer replacement parts for their boom poles but B&H does not have the correct part available. You should be able to get it directly through K-Tek. You can reach them by phone at 760-727-0593 or by email at info@ktekpro.com. Their offices are located in Vista, California.