K-Tek Kp18Vft Mighty Boom Graphite Boompole 18.5'

K-tek Kp18vft Mighty Boom Graphite Boompole 18.5'

Product Code: eq94922
Availability: In Stock

$2,969.70 $3,712.12

Qty

17 reviews Write a review

Description
Reviews (17)

The K-Tek KP18VFT Mighty Boom Graphite Boompole 18.5'is a 5-section boompole that extends to 18.5' and collapses down to 5.2'. Lightweight at 2.8 lb, it features six sections made of wide graphite tubes designed to increase the stiffness and optimize handling balance. The result is quicker cueing and better user control of the microphone.

The KP18VFT's removable headpiece allows for cable reconfiguration without any soldering required. The top attachment is a 3/8"-16 male thread. Included is a straight cable with a right-angle, 3-pin XLR female connector and a KFT Flow-Through base bottom module with a rubber bumper.

The locking collars feature a thick yet smooth surface allowing for a more subtle gradual extension of each section. The anodized, oval divets with exterior dimples provide a great grip and smooth feel when opening and closing each collar. The finish between the tubes allows for the sections to sleekly glide open and closed. Additionally, the Mighty Boom poles are hand-burnished to diffuse handling noise.

To allow for quick conversion when working in the field, the KP18VFT is compatible with the KPCK18V cable kit and KPCCR Bottom Module (for conversion to a coiled-cable boompole with XLR side exit). It is also compatible with the KPTA Transmitter Adapter Module and KPTF Flow-Through Module. Mighty Boom boompoles are made in the USA.

5 x Sections, Graphite, Extends to 18.5' Collapses to 5.2' Straight Cable/Right-Angle XLR Connector Bottom Module with Flow-Through Removable Headpiece Strong, Rigid, Lightweight at 2.8 lb Sure-Grip Oval Divots Rubber Bumper Bottom Made In the USA

Parameters
Maximum Length	18.50' / 5.64 m
Minimum Length	5.2' / 157.5 cm
Material	Graphite
Thread Type	3/8"-16 Male
Top	Removable
Included Cabling	Straight
Cable Exit	Bottom Flow-Through
Output Type	XLR 3-Pin
Number of Sections	5
Adjustment Lock	Twist Lock
Weight	2.8 lb / 1.3 kg
Packaging Info
Package Weight	3 lb
Box Dimensions (LxWxH)	62.75 x 2 x 2"

Five sections made of strong and rigid graphite tubes
Extends to 18.5'
Collapses down to 5.2'
Lightweight at 2.8 lb
RF-shielded straight cable with right-angle, 3-pin XLR female input connector and a straight 3-pin XLR male output connector
KFT Flow-Through bottom module with rubber bumper bottom
Removable headpiece
Top attachment with 3/8"-16 male thread
Sure-grip oval divets
Hand-burnished to diffuse handling noise
Compatible with KPTA Transmitter Adapter Module
Made in the USA

Related Questions and Answers

Q: 1. Will this mount the Auray DUSM-1 shockmount?

A: The Auray DUSM1 shock mount features a 3/8 female threading compatible with the K-Tek boom poles.

Q: 2. Are the locking rings made of graphite or some sort of metal. Is it wipe-able with Isopropyl alcohol?

A: The tube sections are made of graphite, but the collars, which you twist to lock/unlock the individual sections are made of aluminum and then anodized.And the collars can be cleaned with alcohol.Hope this helps,Your friends at K-Tek

Q: 3. Is the clip removable? Thanks in advance!

A: The K-Tek Boom and Accessory Clip can be rotated, but it is not designed to be removed.

Q: 4. I need to replace one of the lock rings, 2nd one up. Can I purchase them here?

A: Unfortunately, B&H does not carry the collars (lock rings) for the K-TEK boom poles. To purchase these spare parts, please contact K-TEK directly at 760.727.0593.

Q: 5. Does it has an internal cable?

A: Yes, the K-Tek KA-113CCR 6-Section Articulated Boom Pole does have an internal XLR cable.

Q: 6. Best way to wire this? Straight cable? XLR module for the exit?

A: The is no 'best'. It's a matter of preference.

Q: 7. What is the fully close length?

A: two foot, five inches or 0.7 meters

Q: 8. Whats the benefit of Graphite over Carbon Fiber?

A: Apart from how it looks on the surface, the K-Tek KEG-150CCR Avalon Series Graphite Boompole with Internal Coiled XLR Cable will not provide noticeable benefits over a similar boom pole that is made of carbon fiber. Weight, durability, and strength are not much different between the two materials.

Q: 9. Can you use a mic boom pole like this with a strobe flash with a 60" octabox?

A: No

Q: 10. Does it has an internal cable?

A: No, the K-Tek KA-113 6-Section Articulated Boom Pole does not have an internal cable. The K-Tek KA-113CCR 6-Section Articulated Boom Pole would be the version with the internal cable, BH #KTKA113CCR (https://bhpho.to/3RX32qD).

Julian	28/09/2024
[Straight] For some reason (hard use) the cable between the poll and the rocorder seems to always take the worst of it. This is the only off-the-shelf cable that holds up to the abuse. In short, buy it. It will save your butt time and time again. 5

Christian	09/09/2024
[XLR 3-Pin] I know I should have gotten gloves instead, but I have sweaty hands. So this is perfect because I don't have to worry about that. The only thing I wish it had different, is the soft loop part that the hooks dig into is not long enough. It makes it not so flexible in that sense. I use it on the KP10VCCR, so maybe because that is a 5 section boom (compared to the usual 6 section boom), the diameter is smaller? Either way, it works well for me and I really like it. 5

Johnny	05/09/2024
[XLR 3-Pin] super light and works great, it can't hear the rattle of the cable inside the tube. Now the sound guy won't get too tired :) 5

David	29/08/2024
[62.75 x 2 x 2"] I had this one day and was on a 10 hour shoot. Nice and light, you get what you pay for. Worth it for what I do. 5

Sem	29/08/2024
[62.75 x 2 x 2"] This is a very well made boompole. The only two issues iI have with it are the bottom XLR connection and the lack of any case. However, because I got it on sale, I can deal with that (keep on reading). The bottom connection is inconvenient if you have to rest the end of boompole on the ground from time to time during a shoot. So, here is what you need to do: get an angled XLR cable like Kopul M4001.5RC that is also available from B&H. For the case you want a hardshell one, but K-Tek charges an outrageous price for it, so what I suggest is Cavision's Boompole Single Tube Carry Bag model SC804S that you can get for less than $25. It fits very snuggly and it is a hardshell to boot! Enjoy. 5

anyonymous	18/08/2024
[Straight] Super light, collapses to carry-on size and it's way strong. I wish that I would have spent the extra eighty bucks the first time I got a boom pole. 5

Alex	15/08/2024
[3/8"-16 Male] This is not my first K-Tek boom pole (third, actually), but the shortest one in my kit was the 9’ aluminum. A good pole, but doesn’t collapse to a length that’s easy to stash in my travel case. So I added this pole to the kit. The graphite design is lighter-weight than the aluminum, and it’s short enough when collapsed to fit in my Pelican 1615 for travel when I don’t need the longer poles. The 9’ range is ideal for ENG, run-and-gun, and doc work, and this pole is one of the best options in that class. And if your K-Tek pole ever needs service or maintenance, K-Tek customer service is top-notch. 5

David BoomOP	12/07/2024
[62.75 x 2 x 2"] Very light and well finished. The locking system works good and holds tight the sections. 5

Marcos	23/06/2024
[5] Light and solid! I much rather have these guys without an internal cable, but that's just my opinion. 5

Daniel	19/06/2024
[Twist Lock] The length and lightweight features of this pole are incredible. The sections loosen and tighten with ease, and this pole also doubles as an underwater pole for my GoPro camera. 5