The K-Tek KP20FT Mighty Boom Graphite Boompole 20.5'is a 6-section boompole that extends to 20.5' and collapses down to 5'. Lightweight at 3.1 lb, it features six sections made of wide graphite tubes designed to increase the stiffness and optimize handling balance. The result is quicker cueing and better user control of the microphone.

The KP20FT's removable headpiece allows for cable reconfiguration without any soldering required. The top attachment is a 3/8"-16 male thread. Included is a straight cable with a right-angle, 3-pin XLR female connector and a KFT Flow-Through base bottom module with a rubber bumper.

The locking collars feature a thick yet smooth surface allowing for a more subtle gradual extension of each section. The anodized, oval divets with exterior dimples provide a great grip and smooth feel when opening and closing each collar. The finish between the tubes allows for the sections to sleekly glide open and closed. Additionally, the Mighty Boom poles are hand-burnished to diffuse handling noise.

To allow for quick conversion when working in the field, the KP20FT is compatible with the KPCK20 cable kit and KPCCR Bottom Module (for conversion to a coiled-cable boompole with XLR side exit). It is also compatible with the KPTA Transmitter Adapter Module and KPTF Flow-Through Module. Mighty Boom boompoles are made in the USA.

6 x Sections, Graphite, Extends to 20.5'    Collapses to 5'    Straight Cable/Right-Angle XLR Connector    Bottom Module with Flow-Through    Removable Headpiece    Strong, Rigid, Lightweight at 3.1 lb    Sure-Grip Oval Divots    Rubber Bumper Bottom    Made In the USA

• Six sections made of strong and rigid graphite tubes
• Extends to 20.5'
• Collapses down to 5'
• Lightweight at 3.1 lb
• RF-shielded straight cable with right-angle, 3-pin XLR female input connector and a straight 3-pin XLR male output connector
• KFT Flow-Through bottom module with rubber bumper bottom
• Removable headpiece
• Top attachment with 3/8"-16 male thread
• Sure-grip oval divets
• Hand-burnished to diffuse handling noise
• Compatible with KPTA Transmitter Adapter Module 
• Made in the USA

Related Questions and Answers

Q: 1. The screw at the top of my boom pole has broken off in the shock mount. Is it possible to buy a replacement top screw for this boom pole?

A: K-Tek does offer replacement parts for their boom poles but B&H does not have the correct part available. You should be able to get it directly through K-Tek. You can reach them by phone at 760-727-0593 or by email at info@ktekpro.com. Their offices are located in Vista, California.

Q: 2. Will this mount the Auray DUSM-1 shockmount?

A: The Auray DUSM1 shock mount features a 3/8 female threading compatible with the K-Tek boom poles.

Q: 3. Are the locking rings made of graphite or some sort of metal. Is it wipe-able with Isopropyl alcohol?

A: The tube sections are made of graphite, but the collars, which you twist to lock/unlock the individual sections are made of aluminum and then anodized.And the collars can be cleaned with alcohol.Hope this helps,Your friends at K-Tek

Q: 4. Is this compatible with the Rode VideoMic Pro Compact Shotgun Mic?

A: The rode video mic pro is a shotgun mic designed for dslr shooters. It has a mini jack for hooking into the mic jack of a dslr type camera and a cold shoe for fitting into the top of a dslr. You wouldn't want to use it on this boom pole. What you want is the rode NTG series shotgun mics. These are the video professional grade shotgun microphones, the NTG-1, NTG-2, NTG-3, NTG-4, and NTG-8. I personally use the NTG-1, and it has served me well for almost 8years. It requires phantom power from whatever recording device you are connecting it to but it is a great mic. You'll need a shock mount though to fit it onto the boom pole. I would suggest the Rode SM4 shock mount. Or if you want protection from wind look no further than the rode blimp and windscreen system. With this kit you are good to go for all indoor and outdoor shooting. Hope this helps!

Q: 5. I need to replace one of the lock rings, 2nd one up. Can I purchase them here?

A: Unfortunately, B&H does not carry the collars (lock rings) for the K-TEK boom poles. To purchase these spare parts, please contact K-TEK directly at 760.727.0593.

Q: 6. Whats the benefit of Graphite over Carbon Fiber?

A: Apart from how it looks on the surface, the K-Tek KEG-150CCR Avalon Series Graphite Boompole with Internal Coiled XLR Cable will not provide noticeable benefits over a similar boom pole that is made of carbon fiber. Weight, durability, and strength are not much different between the two materials.

Q: 7. Is the side-exit XLR port suitable for a plug-on wireless transmitter (such as the Sennheiser EW series "SKP"), or will it not attach firmly enough?

A: In theory, yes, you could connect a plug-on transmitter to the side exit XLR output on the K-Tek KE-110CCR Avalon Series Aluminum Boompole with Internal XLR Cable. Ideally, the transmitter would have a locking mechanism for secure connection at the XLR output.

Q: 8. What is the fully close length?

A: two foot, five inches or 0.7 meters

Q: 9. Best way to wire this? Straight cable? XLR module for the exit?

A: The is no 'best'. It's a matter of preference.

Q: 10. what c-stand and clamps do I need with the K-Tek KE-89CC?

A: For the C-stand, you can use any model, just be sure to select one that accommodates the height you require. Any standard C-stand and boompole holder can be used. For a stand that extends 10 feet, you may like the Impact Turtle Base C-Stand - 10.75' - Chrome (B&H# IMLSCT40M). The same stand is available in different heights. For an easy to use boompole holder, consider the Auray Boompole Holder and Grip Head Kit (B&H# GBBPHK) or BoomMate Boompole Holder and Grip Head Kit (B&H# BOBPHK).