Offering a 1/4"-20 mounting thread, the L-Series Battery Plate to EN-EL14 Dummy Battery (15.7-39.4")from L-Series Battery Plate to EN-EL14 Dummy Battery (15.7-39.4")is designed to be mounted onto a cheese plate or other support on your camera rig to provide extended battery power. The included dummy battery allows you to use larger-capacity L-series type batteries to power any camera or device that runs on a Nikon EN-EL14 battery.

The dummy battery adapter provides a 7.4 to 8.4 VDC input and output, and it features a coiled 15.7 to 39.4" dummy battery cable. The battery plate features a 1/4"-20 thread and mounting screw, and a removable shoe adapter is also included for mounting on a camera or cage shoe mount.

L-Series Battery Plate    EN-EL14 Dummy Battery    1/4"-20 Mounting Thread & Screw    Coiled 15.7 to 39.4" Dummy Battery Cable    Removable Shoe Adapter Included    7.4 to 8.4 VDC Input & Output

Related Questions and Answers

Q: 1. Does this dummy regulate the voltage to 7 if I have it hooked to a 12 volt battery?

A: It does not regulate the voltage passing through, so you'll need to use our power source or others that are specifically designed for cameras.

Q: 2. Does this battery charger work with Nikon EN-El 14 A batteries - which power the newer Nikon cameras such as P7800 ( mine) or D5300 - or the older 14 battery for the P7100 , D 5200 etc.There is a difference in the battery designation and the way the camera talks to each battery...I found out the hard way that the older 14 battery will not work in a new 14-A camera. It should not affect charging but it surely affects usage.

A: Yes the Watson Compact AC/DC Charger for EN-EL14 Battery Charger will be fully compatible with the Nikon EN-EL14 A series battery.

Q: 3. Can I use this with my Nikon D810?

A: This dummy pack will work with the Nikon D810.

Q: 4. is this compatible with a Nikon d5600?

A: GyroVu USB to Nikon EN-EL14 Dummy Battery Intelligent Cable with 3.1A Power Supply (40") has the compatible coupler for Nikon D5600 DSLR. You will need a Ac power supply that provides 7.2v or higher. The one included in the box is a 5V.

Q: 5. Which power supply unit can be used with this to power my Nikon 1V1?

A: You can use this power supply with the E15 Battery Dummy Pack. More coming soon.

Q: 6. Would like to power a Nikon Z-6 from a d-tap source, using a Core Edge Battery. Need to make sure the voltage is at the required 9.4 volts?

A: This is designed for select ANDYCINE On-Camera Monitors, it will not work with Core Edge Batteries. However those batteries will have a D-Tap output. You could use something like the Wooden Camera D-Tap to Nikon D610, D800, D810, D850, D7500, Z6 & Z7 Power Input (20") instead. https://bhpho.to/2Rl6881

Q: 7. Can I change the clamp screws to ratchiting type?

A: this may be possible but we would recommend checking the manufacturer site to ensure that any modifications being made will not void the warranty

Q: 8. Can I power my Nikon D850 from my Andycine C7 using this adapter?

A: Unfortunately, there is an incompatibility with voltage acceptance between the SmallRig EN-EL15 Dummy Battery requesting 7.4 volts and the ANDYCINE C7 7" HDMI Ultrabright Touchscreen Monitor with 3D LUTs, Waveform & L-Series Plate providing 8.4 volts when sending power out to the Nikon D850 DSLR Camera.

Q: 9. When it says "Fully Decoded Dummy Battery" does this mean it most likely won't give errors? Also, would this be safe to use (correctly) with an FX3?

A: We would not recommend using this with the Sony FX3, as it is not among the tested and approved units by Sony.

Q: 10. Can this be used on a Nikon D5200?

A: D5200 is using EN-EL14. This EL-15 is not for D5200.