Power your RED KOMODO camera as well as a monitor, recorder, light, focus motor, wireless equipment, or other accessories with this dedicated Gold mountRED KOMODO Gold Mount Battery Plate by Core SWXfrom Core SWX. The plate enables you to use a professional, high-capacity Gold mount battery to power your camera, while leaving the camera's DC input free, enabling hot-swap battery changes with available AC power. It mounts directly onto the integrated dual BP-U battery plates on the RED KOMODO camera.

The plate features integrated D-Tap, USB Type-A, and 2-pin LEMO-style outputs to power a variety of select accessories. It also features a USB Micro-B firmware update port, reinforced Gold mount locking, and red/green LED status indicators. This plate will pass smart battery data through to the KOMODO camera such as remaining battery percentage, runtime, and capacity.

Mounts Directly onto RED KOMODO Camera    For Single 14.4V Gold Mount Battery    D-Tap, USB Type-A & 2-Pin LEMO Outputs    Enables Hot Swaps with AC Power    Passes Smart Battery Data    Red/Green Status LEDs    USB Micro-B Update Port

Leaves the AC power input on the RED KOMODO free, enabling hot-swap battery changes when connected to AC power

D-Tap, USB Type-A, and 2-pin LEMO-style accessory outputs

Passes smart battery data through to your camera

Reinforced Gold mount locking plate

Green and red LED status indicators

Related Questions and Answers

Q: 1. Is this item compatible with the CORE sharkfin hotswap unit? I purchased the one made for KOMODO but I want to be sure that using it in conjunction with this adapter will be safe given all of RED's known power sensitivities.

A: Yes, The SWX Shartkfin will support and work with the Core SWX Battery Plate for RED KOMODO (V-Mount) adapter. Link to Sharkfin - https://bhpho.to/3NQh2Op

Q: 2. Have you found a 19.5v power supply that works with the male 4 pin xlr port?

A: If you would like to power your camera using the XLR input on the Core SWX Battery Plate for Sony PXW-FX9 you could work with this power supply. https://www.bhphotovideo.com/c/product/438820-REG/Switronix_SPU_4_SPU_4_Compact_Power_Supply.html?sts=pi&pim=Y

Q: 3. Will this fit an FS7 on a Tilta-Rig baseplate? It looks long, I wonder if it will jam into the 15mm rail mounts on the back of the Tilta plate.

A: I'll answer my own question.... as I went and bought the thing...Yes the plate too long (tall) to fit an FS7 on a Titla rig base plate but you can take the back 15mm rail mounts off of the Tilts and you are good to go.

Q: 4. Does it come with a power cable for Komodo-X?

A: A power cable is not included with the Tilta Battery Plate for RED V-RAPTOR and KOMODO-X (Gold Mount), but since the plate can pass power through it to the camera via its v-mount connection, you shouldn't need a power cable to power the camera from the battery mounted to the plate.

Q: 5. Where is the D-tap output on the gold mount version? I can't seem to see it in the pictures.

A: The Tilta Battery Plate for RED V-RAPTOR (Gold Mount) has a D-Tap and USB-C port on the bottom of the product.

Q: 6. Will this work with FX6?

A: We have not yet been able to test this, as camera is yet unavailable as of this writing.

Q: 7. Is the dual battery plate centered horizontally?

A: Yes. The only issue I had was it was a little loose at the Gold Mount connection. Built up some gaff tape between the two pieces and it works great.

Q: 8. Does the D-Tap, Limo and USB get their power from the camera, if it were plugged into mains? Or do they all get their power from the V-Mount?

A: All of the Core SWX Battery Plate for RED KOMODO's (V-Mount) power ports would draw power form the connected v-mount battery.

Q: 9. Does the 4-pin DC input also provide power to the D-tap outputs?

A: The Core SWX Battery Plate for Sony PXW-FX9 (Gold Mount) can use the 4-pin XLR input to provide power to the power output ports, like the D-Tap, the 4-pin Hirose, and the 5v USB.

Q: 10. Could I power a Sony LA EB1 via the 12v Hirose output on the back of this with the right cable? Correct voltage and amperage?

A: Yes, the Hirose connections are power outputs on the Core SWX Battery Plate for Sony PXW-FX9.