The black Selador Desire D40 Lustr+ LED Fixture with L5-20 Connector from ETC combines 40 Luxeon Rebel emitters in one unit, for bright, efficient lighting. The PAR-shaped washlight is a multipurpose tool that can be combined into a rig with conventional fixtures or used by itself. It features efficient primary lenses and careful color choices making it useful for stage and studio applications where strong color and high intensity are required.

By combining up to seven LED colors per fixture, the x7 Color System creates a balanced blend of deep, saturated colored or natural white light. And with the Desire luminaires, you get even more color flexibility through the Adaptive Color Control system. The Selador x7 Color System produces a wide range of spectrally balanced, saturated, and tinted color choices.

The user-interface on the rear of the unit puts the control in your hands – the Desire luminaire can be managed by any RDM-enabled controller or on their own. The fixture offers Quick Setup options, so you can quickly and easily adjust the luminaire’s performance.

The additional red-shift option allows the Desire fixture to mimic a tungsten fade, and the Plus 7 Mode gives you control over each LED color to increase or decrease individual colors. Using the built-in color-pickers on ETC lighting control consoles (sold separately), you can pick a gel match for the Desire fixtures to produce, or you can modify the color to get the exact shade you want.

You get amazing all-around theatrical-quality light from the D40 Lustr+ array. The x7 Color System is optimized in Lustr+ units to create clean white and tinted light, to bring out the beauty of set pieces and render individual skin tones naturally.

A rugged, die-cast enclosure, noiseless fan-free operation, multiple lens options, and advanced user interface make this fixture a great choice for multiple applications.

D40 Lustr+ front light wash fixture is optimized for skin tones and light tints for use as a theatrical front light

Six colors plus high-intensity white LEDs create a front light wash fixture for full range color, with an emphasis on lighter colors and white

40 LED color mixing wash fixture

Rated for IP20 dry location use

Power and DMX in / thru connections for easy setup

User-friendly control interface with multiple modes and fixture settings

Rugged, die-cast all-metal housing

Easy access slots for secondary lenses and standard 7.5" (190mm) PAR accessories

Hanging yoke is standard; optional yoke / floor stand available

Neutrik power in and thru connections (dry location version)

Up to 10 fixtures may be linked via power in / thru connectors per 15A circuit using 1mm² cables as supplied

Requires power from a non-dim source

50,000 hour LED life (50,000 hours to 70% intensity)

40 Luxeon Rebel 2.5W LED emitters

Broad spectrum color interacts seamlessly with conventional sources

Beautifully illuminates skin tones and other objects for natural appearance and high color rendering

Exclusive optional red-shift option emulates tungsten dimming performance characteristics

Additional secondary lenses available for multiple beam spread options

Each fixture ships with a very narrow secondary lens

DMX512 in and thru via 5-pin XLR connectors

Multiple control options including RGB, strobe, and console-free Master/Slave mode

15-bit virtual dimming engine provides smooth, high quality theatrical fades

RDM functionality for address and setting changes

Active electronic thermal management for droop-free operation

No-noise, fan-free convection cooling for use in acoustically sensitive installations

Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free airflow around fixture housing

Primary field angle of 17°

Round and oblong beam-diffusers (sold separately)

UL 1573-rated for indoor use

Related Questions and Answers

Q: 1. What battery option will work for this instrument?

A: You may use the Anton Bauer CINE VCLX Battery B&H # ANCVCLXB connected via 4 XLR with the BLUESHAPE PWC34 3-Pin XLR Male to 4-Pin XLR Female Power Cable (10') B&H # BLSPWC34 to power the L5-C.

Q: 2. Can this be powered up with v-mount batteries?

A: No, it cannot use a V mount battery.The battery used has to meet these specifications;Output Voltage 23-36 voltsBattery Operation Temperature68 95 degrees FMinimum Capacity5.5 AHPower Outlet Connector4-pin XLR Connector

Q: 3. Are the touch screens included with the board?

A: Touch screens are not included.

Q: 4. Would this fit as a replacement for the tightening knob on the Elinchrom ONE? The flash droops due to insufficient tightening.

A: No, this Arri Locking Yoke Tilt Handle is specific to the Arri L5-C Fresnel.

Q: 5. What moving lights do you recommend to go with this?

A: The ETC CS20 20-Fader ColorSource will adapt to any 5‑pin DMX connection. We usually suggest the following unit that makes a great pair American DJ Focus Flex L7 RGBW LED Moving Head with Pixel Effects BH #AMFOCUSFLXL7 • MFR #FOCUS FLEX L7 https://bhpho.to/3Rv2rd6

Q: 6. can i attach a chimera pancake lantern to this fixture? like this one? a href= http://www.bhphotovideo.com/c/product/218658-REG/Chimera_1874_Pancake_Lantern_Softbox.html target= _blank http://www.bhphotovideo.com/c/product/218658-REG/Chimera_1874_Pancake_Lantern_Softbox.html/a

A: No, that light is not designed to be used with a softbox.

Q: 7. What set of barn doors will work for the Arri l5-c?

A: Arri B&H # ARBD4F650 K5600 B&H # K5BDJ400

Q: 8. reviews of etc4?

A: Unfortunately, none of our customers have reviewed this product yet. Please check back periodically for any updates.

Q: 9. i am interested in getting these lights as a 2 or 3 light kit and also are there any current Arri cases that will work with these light for location work?

A: While there is no case from Arri that will fit 2 or 3 of the L5-C units, we do have a case which fits the L7-C and will also fit a single L5-C. Please see the link to the item: a href= http://bhpho.to/1DkO4uM target= _blank http://bhpho.to/1DkO4uM/a

Q: 10. What is the maximum wattage of this fixture please?

A: You should be able to use up to a 500w lamp with them.