The black Selador Desire D40 Vivid LED Fixture with Stage Pin Connector from ETC combines 40 Luxeon Rebel emitters in one unit, for bright, efficient lighting. The PAR-shaped washlight is a multipurpose tool that can be combined into a rig with conventional fixtures or used by itself. It features efficient primary lenses and careful color choices making it useful for stage and studio applications where strong color and high intensity are required.

By combining up to seven LED colors per fixture, the x7 Color System creates a balanced blend of deep, saturated colored or natural white light. And with the Desire luminaires, you get even more color flexibility through the Adaptive Color Control system. The Selador x7 Color System produces a wide range of spectrally balanced, saturated, and tinted color choices.

The user-interface on the rear of the unit puts the control in your hands – the Desire luminaire can be managed by any RDM-enabled controller or on their own. The fixture offers Quick Setup options, so you can quickly and easily adjust the luminaire’s performance.

The additional red-shift option allows the Desire fixture to mimic a tungsten fade, and the Plus 7 Mode gives you control over each LED color to increase or decrease individual colors. Using the built-in color-pickers on ETC lighting control consoles (sold separately), you can pick a gel match for the Desire fixtures to produce, or you can modify the color to get the exact shade you want.

The Desire D40 Vivid luminaires give you a broad color range for spectrally-balanced saturated and tinted light and are able to match the color from your gelled tungsten sources.

A rugged, die-cast enclosure, noiseless fan-free operation, multiple lens options, and advanced user interface make this fixture a great choice for multiple applications.

D40 Vivid wash fixture designed for high-intensity color mixing across the spectrum for wide color wash use

x7 Color System array balanced for best all-round use as a color changing wash luminaire

40 LED color mixing wash fixture

Rated for IP20 dry location use

Power and DMX in / thru connections for easy setup

User-friendly control interface with multiple modes and fixture settings

Rugged, die-cast all-metal housing

Easy access slots for secondary lenses and standard 7.5" (190mm) PAR accessories

Hanging yoke is standard; optional yoke / floor stand available

Neutrik power in and thru connections (dry location version)

Up to 10 fixtures may be linked via power in / thru connectors per 15A circuit using 1mm² cables as supplied

Requires power from a non-dim source

50,000 hour LED life (50,000 hours to 70% intensity)

40 Luxeon Rebel 2.5W LED emitters

Broad spectrum color interacts seamlessly with conventional sources

Beautifully illuminates skin tones and other objects for natural appearance and high color rendering

Exclusive optional red-shift option emulates tungsten dimming performance characteristics

Additional secondary lenses available for multiple beam spread options

Each fixture ships with a very narrow secondary lens

DMX512 in and thru via 5-pin XLR connectors

Multiple control options including RGB, strobe, and console-free Master/Slave mode

15-bit virtual dimming engine provides smooth, high quality theatrical fades

RDM functionality for address and setting changes

Active electronic thermal management for droop-free operation

No-noise, fan-free convection cooling for use in acoustically sensitive installations

Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free airflow around fixture housing

Primary field angle of 17°

Round and oblong beam-diffusers (sold separately)

UL 1573-rated for indoor use

Related Questions and Answers

Q: 1. Can the LED be changed out when the lifespan is up?

A: The LED array in the ETC Source Four LED Series 2 Lustr is not user-replaceable. The unit would have to be returned to ETC if replacement of the LED array is required.

Q: 2. Does this also work with the Redback version of the Hudson Spider?

A: Yes, this Hudson Spider 7' Umbrella can work with the Redback.

Q: 3. reviews of etc4?

A: Unfortunately, none of our customers have reviewed this product yet. Please check back periodically for any updates.

Q: 4. If you are using this in a studio with a DMX Lighting Control board, do you need the optional controller?

A: In order to use this fixture with DMX, you will need the Kino Flo FreeStyle 152X LED DMX Controller, B&H # KILED152X120. https://bhpho.to/2OEZERR

Q: 5. Can you order barn doors for this?

A: You could use these barndoors with that light. https://bhpho.to/2Iuk4Y9

Q: 6. Can you operate these tubes with the Freestlyle 151X ballast?

A: The tubes and this controller are compatible, but you do need either a Harness or slitter & extension to hook them up together. The extension is here: https://www.bhphotovideo.com/c/product/1226560-REG/kino_flo_x12_25_extension_cable_150_for.html The splitter you can see it here: https://www.bhphotovideo.com/c/product/1442453-REG/kino_flo_x12_a4_4_to_1_splitter.html the harness is here: https://www.bhphotovideo.com/c/product/1472816-REG/kino_flo_har_fs4_freestyle_t44_locking_harness.html

Q: 7. Can this mount on a c stand? Or what is the best way to mount it?

A: You could mount to a light on a c stand. Generally the light would mount to the stand and will have to have a port for an umbrella. This umbrella was designed for use with LED lights. It cannot be used with hot lights.

Q: 8. Does this unit come with a lens tube?

A: Unfortunately, this fixture does not include a lens tube. One such lens tube that can be used is the ETC Enhanced Definition Lens Tube for Source 4 Black Ellipsoidals, Black - 50 Degrees B&H # ET450EDLTB. An image is shown below for reference.

Q: 9. what is the throw distance for the 120ST?

A: According to the manufacturer, this fixture will produce a beam diameter of 14 degrees at 2 meters with a lux rating of 16,060.

Q: 10. Can this be used as a bounce for hot lights (tungsten/HMI)?

A: No, this is made to use with Led fixtures