The white D40 Studio Daylight LED Fixture with TwistLock Connector from ETC uses efficient white LEDs to create high volumes of daylight-balanced light with far less energy than a traditional halogen or tungsten light would use. This luminaire produces brilliant white light that naturally illuminates the talent – on screen or on stage via its 40 Luxeon Rebel ES LED emitters. The 5,600K light from this luminaire mimics HMI daylight fixtures, while using a mere 110W of power. It is suitable for indoor broadcast, theater, architectural uses, and for use in houses of worship – where color temperature and skin-tone rendering are critical.

The D40 Studio Daylight LED Fixture can be configured to operate under console control for studio systems or in stand-alone settings for location lighting when a console isn't available. The user interface enables easy configuration and specific features for video and film professionals.

Contains 40 5,600 K LEDs for high-intensity, non-variable cool-white output

IP20 rated for indoor use

Rugged, die-cast all-metal housing

User-friendly control interface with multiple modes and fixture settings

Easy access slots for secondary lenses and standard 7.5" (190mm) PAR accessories

DMX512 in and thru via 5-pin XLR connectors

Up to 10 fixtures may be linked via power in / thru connectors per 15A circuit using 1mm² cables as supplied

Requires power from a non-dim source

50,000 hour LED life (50,000 hours to 70% intensity)

Uses rebel ES white light emitters for higher output

15-bit virtual dimming engine provides smooth, high quality theatrical fades

RDM functionality for address and setting changes

Active electronic thermal management for droop-free operation

No-noise, fan-free convection cooling for use in acoustically sensitive installations

Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free airflow around fixture housing

Additional secondary lenses available for multiple beam spread options

Studio control mode allows fixtures to be operated with no DMX console required

Related Questions and Answers

Q: 1. Can you order barn doors for this?

A: You could use these barndoors with that light. https://bhpho.to/2Iuk4Y9

Q: 2. How can I connect a battery to the Genaray to use in the woods at night for several hours ?

A: With a power xlr to v mount or other batter adaptor

Q: 3. what is the throw distance for the 120ST?

A: The unit offers the following Illuminance (14°): 16,060 lux @ 2 m = 6.5ft (20°): 7,900 lux @ 2 m = 6.5ft

Q: 4. If you are using this in a studio with a DMX Lighting Control board, do you need the optional controller?

A: In order to use this fixture with DMX, you will need the Kino Flo FreeStyle 152X LED DMX Controller, B&H # KILED152X120. https://bhpho.to/2OEZERR

Q: 5. Is this led light fan noise?

A: No. The following unit is silent and does not disturb production.

Q: 6. what is the throw distance for the 120ST?

A: According to the manufacturer, this fixture will produce a beam diameter of 14 degrees at 2 meters with a lux rating of 16,060.

Q: 7. Is the beam angle adjustable?

A: No, this light has a 60 degree beam angle. It cannot be adjusted. If you would purchase a different reflector, the beam angle would change according to the reflector.

Q: 8. this led light good for film shoot?

A: Depending on your shoot, yes. Ive been very happy with these so far. Last week I shot in a room with open windows and a skylight in daylight and they still did the job. Very happy with these.

Q: 9. Sorry if I'm just missing this info on the page, but how long is the power cable?

A: Approximately 12 ft

Q: 10. How does the power compare to an Aputure 120D COB?

A: According to the photometrics, the Genaray MonoBright Daylight LED 1200 would be more powerful compared to the Aputure Light Storm LS C120d light fixture. The Genaray light fixthre has an output of 14,000 Lux / 1300.6 FC measured at 3 feet / 1 meter, while the Aputure light fixture has an output of 3,300 Lux / 306 FC measured at 3 feet / 1 meter.