Mount your monitor to your existing AWM series component with the silver Atdec 5" Modular Monitor Arm. It supports flat displays up to 26.5 lb or curved displays up to 17.6 lb with 75 x 75 or 100 x 100mm VESA patterns and provides tilt and pan adjustment to help you place your monitor exactly where you want it.

Works with AWM Series Components    Supports Flat Displays up to 26.5 lb    Supports Curved Displays up to 17.6 lb    75 x 75 & 100 x 100mm VESA Support    Tilt & Pan Adjustment

• Additional AWM series hardware is required to mount this arm to your desk or wall

• Supports flat-screen monitors up to 26.5 lb or curved-screen monitors up to 17.6 lb

• Adjustable tilt and pan

• Quick release/attachment display mechanism

• Made of recyclable aluminum

Related Questions and Answers

Q: 1. Does it come with Filter Frame & Diffuser?

A: This fixture includes a Softening filter that slides into the slot on the front of it. The Barndoor has no other provision than a Barndoor.

Q: 2. Are the gas struts able to be replaced as needed?

A: As far as we can determine, the gas struts are not user replaceable items. The manufacturer may be able to assist you if the need should arise. Atdec: Tel: 303-972-7550 Email mdonnelly@atdec.com

Q: 3. Does this tilt monitor work with ikan DH7 7" Monitor ?

A: This bracket is designed for the Focus 7. The DH7 may work as well, as it does have a 1/4"-20 threading on the side of it. However the combination of this bracket and the DH7 is unknown at this time, it would have to be something one would test out to see the results. It may be possible though.

Q: 4. Will this mount to the 2019 Apple 32" Pro Display or do I have to order the Apple VESA adapter as well? ---Thanks

A: You do need an Apple Pro Display adapter. The Apple display uses a magnetic mount and the adapter provides the VESA mount. The adapter costs $194!

Q: 5. Can i use the dms2000 for only one monitor? would that ruin it's functionality or mess up anything? or does it have to have two monitors on it always?

A: You can use the DMS2000 with only one monitor, however our DMS1000 is the same, expect designed for 1 monitor. If you have any other questions or require additional information, if you could please email us directly at support@kantoliving.com and we would be happy to help.

Q: 6. Can this bracket be used with other 700 series SmallHD monitors? Namely a 702

A: You can use this with the SmallHD 702. This arm offers a 1/4"-20 screw for mounting and the SmallHD 702 offers a 1/4"-20 thread on the sides of the monitor.

Q: 7. 1/4"-20 ARRI Pin Lock Insert, SmallHD 2-Pin Insert Are these two items included?

A: The ARRI Monitor Arm for Camera MAC-1 comes with 1/4"-20 ARRI Pin Lock Insert, and SmallHD 2-Pin Insert in the box. In the Box ARRI Monitor Arm for Camera MAC-1 1/4"-20 ARRI Pin Lock Insert SmallHD 2-Pin Insert Limited 1-Year Manufacturer Warranty

Q: 8. Is this a 'good fit' for the RODE Blimp2 ?

A: Yes, this will be a good fit with the Blimp II.

Q: 9. Would this hold the Samsung odyssey g9 49" monitor?

A: Based on the VESA pattern and weight capacity of the mount and monitor, it should work.

Q: 10. Will this work with the Gigabyte G32QC?

A: Yes. See specs below. Atdec A-HDA-0818 Specs Load Capacity 17.6 to 39.7 lb (8.0 to 18.0 kg) Compatibility Desk Clamp: Surfaces 0.4 to 2.0" (10.0 to 50.0 mm) thick Bolt-Through: Surfaces up to 2.4" (60.0 mm) thick VESA Compatibility VESA 75 x 75mm and 100 x 100mm Gigabyte G32QC Physical Height Adjustment 3.94" / 100 mm Tilt Adjustment -5 to 20° Mounting-Hole Pattern 100 x 100 mm Lock Slot Yes, Kensington Dimensions (W x H x D) 28.0 x 21.7 x 9.2" / 710.5 x 552.2 x 234.8 mm (with Stand) 28.0 x 16.7 x 4.0" / 710.5 x 423.3 x 102.8 mm (without Stand) Weight 17.20 lb / 7.8 kg