Mount your monitor to your existing AWM series component with the silver Atdec 27.9" Modular Monitor Arm. It supports flat displays up to 20 lb or curved displays up to 17.6 lb with 75 x 75 or 100 x 100mm VESA patterns and provides tilt and pan adjustment as well as extension up to 27.9" to help you place your monitor exactly where you want it.

Works with AWM Series Components    Supports Flat Displays up to 20 lb    Supports Curved Displays up to 17.6 lb    75 x 75 & 100 x 100mm VESA Support    Tilt & Pan Adjustment    Arm Extends up to 27.9"

• Additional AWM series hardware is required to mount this arm to your desk or wall

• Supports flat-screen monitors up to 20 lb or curved-screen monitors up to 17.6 lb

• Adjustable tilt and pan

• Quick release/attachment display mechanism

• Optional arm rotation limiter included

• Advanced cable management

• Made of recyclable aluminum

• VESA head can be replaced with an optional notebook tray

Related Questions and Answers

Q: 1. Are the gas struts able to be replaced as needed?

A: As far as we can determine, the gas struts are not user replaceable items. The manufacturer may be able to assist you if the need should arise. Atdec: Tel: 303-972-7550 Email mdonnelly@atdec.com

Q: 2. Will this bracket work with the SmallHD Indie 7?

A: Yes it will.

Q: 3. Will this work with the Gigabyte G32QC?

A: Yes. See specs below. Atdec A-HDA-0818 Specs Load Capacity 17.6 to 39.7 lb (8.0 to 18.0 kg) Compatibility Desk Clamp: Surfaces 0.4 to 2.0" (10.0 to 50.0 mm) thick Bolt-Through: Surfaces up to 2.4" (60.0 mm) thick VESA Compatibility VESA 75 x 75mm and 100 x 100mm Gigabyte G32QC Physical Height Adjustment 3.94" / 100 mm Tilt Adjustment -5 to 20° Mounting-Hole Pattern 100 x 100 mm Lock Slot Yes, Kensington Dimensions (W x H x D) 28.0 x 21.7 x 9.2" / 710.5 x 552.2 x 234.8 mm (with Stand) 28.0 x 16.7 x 4.0" / 710.5 x 423.3 x 102.8 mm (without Stand) Weight 17.20 lb / 7.8 kg

Q: 4. Is this a 'good fit' for the RODE Blimp2 ?

A: Yes, this will be a good fit with the Blimp II.

Q: 5. Does the tilt arm swivel radially off of the hotshoe point? In other words can you rotate it to someone on the side of the camera if needed?

A: The bottom mount of the SmallHD Tilt Arm for FOCUS 7 Monitor can be readjusted for a different angle of view.

Q: 6. 1/4"-20 ARRI Pin Lock Insert, SmallHD 2-Pin Insert Are these two items included?

A: The ARRI Monitor Arm for Camera MAC-1 comes with 1/4"-20 ARRI Pin Lock Insert, and SmallHD 2-Pin Insert in the box. In the Box ARRI Monitor Arm for Camera MAC-1 1/4"-20 ARRI Pin Lock Insert SmallHD 2-Pin Insert Limited 1-Year Manufacturer Warranty

Q: 7. Would this hold the Samsung odyssey g9 49" monitor?

A: Based on the VESA pattern and weight capacity of the mount and monitor, it should work.

Q: 8. Would this hold two LG 34UM59-P 34 21:9 FreeSync IPS MonitorLG 34UM59-P 34 ?

A: Yes it will hold; two of the LG 34UM59-P 34 21:9 FreeSync IPS Monitor B&H # LG34UM59P.

Q: 9. Would this work with laptop tray from ergotron? I'd like to put a monitor one side and laptop the other side.

A: The ERGOTRON Notebook Tray attaches to a VESA MIS-D 75 x 75 mm hole pattern interface on a mount or arm. The Kanto Living DMS2000 Dual Arm Desktop Monitor Mount (Silver) offers both 75x75mm and 100x100mm VESA mounting hole spacing. So they should be compatible.

Q: 10. Would this hold a 49 inch Dell U4919DW Monitor? It is 25lbs without the stand, but the size was concerning to me.

A: Yes it will.