Broadcasters and podcasters looking for a professional articulating boom arm mic mount will be impressed with the CAD PodMaster Boom Arm / Mic Mount, a durable two section spring-loaded and counterbalanced boom arm that's designed specifically for your broadcast suite.

The PodMaster features all-metal construction and is supplied with a C-clamp for easy mounting and a 5/8"-27 stud adapter that's compatible with most microphone clips.

Counterbalanced    Two Section Spring-Loaded Boom Arm    Quiet Broadcast Quality Operation    Durable All Metal Construction    5/8"-27 Stud Adapter fits Most Mic Clips    Includes C-Clamp for Easy Mounting

Related Questions and Answers

Q: 1. What is the Signal to Noise ratio?

A: AKG lists the headphone signal to noise ratio as 98.0 dB.

Q: 2. What is the maximum reach of the boom? Maximum recommended mic weight? Can you add your own XLR cable to the boom internally?

A: Hi, Yes, you can add your own cable, maximum weight 2.1 lbs and the maximum reach is approximately 36 inches. Thank you for shopping at B&H!

Q: 3. If this holder "Supports Tablets from 6 to 11 inches," should one measure the long side or the diagonal for this distance?

A: Like laptops and televisions, tablets are referred to by the measurement of the display's diagonal dimension. You should measure the screen diagonally when checking to make sure your tablet is compatible with the CAD PodMaster TH3 Heavy-Duty Universal Tablet Holder.

Q: 4. What is the thread size? What is the depth of of the female thread?

A: The only female thread on this item is that of the screw-down mechanism (thumb screw) mentioned in the overview and clearly pictured. Those threads are M6x1.0 and about 17mm deep. They extend to the large central hole at the center of the cylinder but the end of the thumb screw does not bear directly against the boom arm. It instead bears against a plastic liner pressed into that central hole which prevents scratching the finish of the boom arm.

Q: 5. Can this be positioned upside down? As in clamped to a shelf overhead?

A: Yes you can clamp the Mount-It! Adjustable Microphone Boom Arm in an upside down position if needed.

Q: 6. What is the inside diameter of the hole through the counterweight or equivalently the outside diameter of the boom arm this is designed to slide over ?

A: The K&M 21105 Counter Weight is designed for use on one-piece K&M boom arms with a 3/8" male thread or a tube diameter 0.6" (15mm). The Counter Weight itself is made of steel, has a height of 2.36" (60mm), a diameter of 1.97" (50mm), and weighs 28.2 oz. (0.8 kg).

Q: 7. I already have the Kupo C-stand with Turtle Base, the steel baby boom arm and the grip head. However, I like the idea of the Kupo Pivoting Boom Arm Clamp. I am having trouble, from the singular image, how it will actually works with the boom arm. It might seem like a silly question, but how does the pole fit into it? Or, is this accessory for another type of boom arm? Thanks for your time!!

A: The riser from a C stand is inserted in the tube that you see in the top of the image of this product. Then you twist the handle on top to tighten it in place. So, this product basically allows you to use a C stand riser as a super-sturdy boom arm.

Q: 8. What is the diameter of the top section, will it hold a foba extension?

A: The clamp can work with items that are between,Minimum Jaw Diameter is 1.18 (30mm)Maximum Jaw Diameter is 1.38 (35mm)There are many Foba extensions. Technically if the one you are referring to is in between the sizes above it should fit.

Q: 9. Is there a shock mount that will fit this microphone?

A: Sorry, no shockmount available for this microphone.

Q: 10. Which windscreen will fit the AKG Lyra?

A: The Lyra has no wind screen made for it. You will have to use a regular pop filter. This is the B&H part number B&H # AUPFSS55 you can find it on our website.