Tilta Advanced Side Handle Type V Left Tilta Gray

Product Code: eq95458
Availability: In Stock

$90.00 $111.60

Qty

20 reviews Write a review

Description
Reviews (20)

Adjust the angle and position of your Tiltaing Wooden Handle or Advanced Side Handle with the Tilta Advanced Side Handle Attachment Type V. This attachment bracket, in Tilta gray, is for your left-hand side handle. It mounts securely onto a Tiltaing Wooden Handle or Advanced Side Handle (neither handle is included), allowing you to adjust the mounting angle as well as the handle's distance from your camera by up to 0.79". The ARRI-compatible mounting rosette features a knurled thumbwheel for tightening the bracket, and it enables attaching this to your camera, baseplate, cage, or other accessory with a matching female rosette.

For Tiltaing Wooden Handles For Tilta Advanced Side Handles 0.79" Length Adjustment ARRI-Compatible Mounting Rosette

Parameters
Material of Construction	Aluminum Alloy Stainless Steel
Dimensions	Contracted: 3.74 x 1.38 x 0.79" / 9.5 x 3.5 x 2 cm Expanded: 4.53 x 1.38 x 0.79" / 11.5 x 3.5 x 2 cm
Weight	2.82 oz / 80 g
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	4.5 x 3 x 0.6"

Related Questions and Answers

Q: 1. Tilta is now using standard Arri Rosette or still proprietary as first shown on the early Komodo cages?

A: This side handle uses standard ARRI rosette mounts.

Q: 2. Will this Type VI handle attach to NATO rails built by other manufactures(SmallRig)? Or do I have to bolt on a Tilta NATO rail?

A: Yes, the Tilta Left-Side Advanced Power Handle with Run/Stop for F570 Battery (Black, Type VI) uses a universal NATO clamp, which would work with non-Tilta NATO rails.

Q: 3. Which cables to power the Advanced Focus Handle, the motor and use the REC Start/Stop (or LANC) at the same time on the camera ?

A: The handle requires a battery (NPF570) for power. this device has a power output for powering your Nucleus Nano Focus motor (the cable is included). if you need a lanc cable to trigger your camera then you need Tilta Nucleus-Nano Run/Stop Cable for Sony FS7/FS5, URSA, EVA1, Z CAM Cameras B&H # TIRSWLCT04L MFR # RS-WLC-T04-LANC

Q: 4. IS this compatible with ARRI rosette?

A: Although the Tilta Rosette is a bit smaller than the ARRI Rosette, the teeth engage correctly and is compatible.

Q: 5. Does anyone know the torx bit size for the small handle screws?

A: The Tilta Side Focus Handle Type II works with the T6 bit.

Q: 6. Can the handle power on a monitor as well?

A: No it cannot: The Tilta Side Focus Handle Type II supports a Sony F570 battery and lets you power and control the Nucleus Nano motor, sold separately. Alternatively, it can be used to power and control start/stop on compatible cameras. "

Q: 7. Can the weird bottom connector be changed for something more standard (rosette, nato, etc.)? I'm specifically wondering if this can be adapter to work with the Tilta C70 cage.

A: This is a custom handle for specific Tilta cages and the connector cannot be changed.

Q: 8. is it possible to attach this handle to a smallrig cage?

A: Yes you can attach it to a small rig cage if it has a spot to screw in a set of ARRI locating pins.

Q: 9. nikon z8?

A: At this time the Tilta Left-Side Advanced Power Handle with Run/Stop (F570, Black) is not compatible with Nikon cameras.

Q: 10. I have the Tilta Advance cages for both my Panasonic S1H and GH5. How does this handle attach to these cages?

A: You can attach the Advanced Focus Handle with the Tilta Advanced Right-Side Handle Adapter Type V BH #TIAAHA5RB or the Tiltaing Advanced Right-Side Handle Adapter Type VI BH #TITAAHA6RB using a NATO rail.

Tim	29/09/2024
[4.5 x 3 x 0.6"] I purchased two of these ( a left and a right) to use on my ring rig for my cinema setup. I use one for follow focus and the other for zoom on my cinema lenses. Works great! 5

Thomas	21/09/2024
[4.5 x 3 x 0.6"] Fits the hand well. Love that it's a attached via nato, I find rosette handles stick out from the body too far. 5

Richard	16/09/2024
[4.5 x 3 x 0.6"] Despite the lack of good info on the B&H site or the Tilta site for choosing the proper model for attachment to a cage, this was a good buy. A phone call to B&H solved the attachment adapter requirement for a modest $18. 5

Timothy	09/09/2024
[2.82 oz / 80 g] I picked this up to add to my small rig cage for my Sony A7s3, works great despite it not being a Tilta cage. Exactly what I needed. 5

Airhole	26/08/2024
[2.82 oz / 80 g] I've seen reviews deriding this thing for not fitting properly on the rail, but my personal experience using this on a Tilta cage is that it fits perfectly and locks tight with a heavy rig. 5

Paul	26/08/2024
[0.15 lb] Have a cine cam bought two because you can have a control grip for each arm one for focus other iso. 5

Stephen	15/08/2024
[4.5 x 3 x 0.6"] hands down. though the nato clamp bolts on a little loose, but not so much that it is a problem. 5

Maksym	09/08/2024
[0.15 lb] Nice grip, good ergonomics, focus ring travel is just the right amount. Putting on the rosette mount is a bit of a pain and requires the included angled Allan key, so don't loose that one. 5

Tom	04/08/2024
[2.82 oz / 80 g] It's a solid grip but make sure it's the right one for you. There are several different ones to choose. This is primarily just a grip for the cage. 5

Fabio	03/08/2024
[2.82 oz / 80 g] Although I haven't used it for long, I absolutely love this handle. The possibility of having the focus on the tip of your finger while holding the camera is incredible, and a game changer for handheld camera. Im pairing with the nano motor and so far it works good. I wish there was a way to revert the direction of the focus knob, in case I need to rig the motor on the right side of the camera. 5