Control your DJI RS 2, RS 3 Pro, or RS 4 Pro gimbal remotely with this Tilta Remote Control Kit for DJI Gimbalsfrom Tilta. The kit includes a remote control handle, a power supply base with mounting bracket, a remote control receiver module, a 2-pin LEMO-type cable, and a 6-pin LEMO-type cable. The handle allows you to control the settings as well as the pan and tilt of the gimbal. It is powered using a separately available L-series battery and mounts onto your rig using a rosette. The wireless receiver module allows you to wirelessly control the gimbal with the handle from up to 262' away, or you can connect the handle using the included LEMO-type cable with the receiver for wired control. The base mounts onto the bottom of the gimbal and allows you to plug in an external power source such as a high-capacity V-mount or Gold mount battery.

For RS 2, RS 3 Pro, RS 4 Pro    Remotely Control Your DJI Gimbal    Battery-Powered Remote Control Handle    Remote Control Receiver Module    Power Base & Mounting Bracket    Wired or Wireless Operation    2-Pin & 6-Pin LEMO-Type Cables Included

Install the remote control module to the NATO connector on the right side of the gimbal.

Operate from inside the car with full control. The maximum control distance is 262.5'.

Provides more precise control under complex situations such as going through tunnels. Use wired control when equipped with a long-distance setup such as a car mount, jib, Russian Arm, etc.

The side holding bracket provides additional protection for your camera during high-speed driving and bumpy shooting conditions, while the power supply base plate provides constant powering for the gimbal.

The left NATO rail on the monitor bracket is compatible with the focus handle and Nucleus Nano hand wheel controller.

Compatible with a car mount, dolly, cable cam, Russian Arm, and more.

Compatible with the separately available Hydra Alien Monitor Bracket to support gimbal remote control during car mount shoots.

Related Questions and Answers

Q: 1. what is the point of this bracket?

A: This is designed to add stability to a heavy camera when it's mounted onto the DJI RS 2.

Q: 2. What’s the furthest distance this remote can work. And do you know if it works through walls?

A: The farthest distance the remote can work wirelessly is 262'. The RF transmission is powerful enough to go through drywall/sheetrock, but not concrete walls, or if the wall is far from the TX/RX.

Q: 3. How exactly does this mount to the cage, and is the design universal so that it could be used with any generic monitor cage?

A: The Tilta Support Handles Kit for DJI Remote Monitor has a "Universal Connection Via Side Handle Attachment" that is compatible with monitors having a 1/4" mounting thread.

Q: 4. Does this come with the Tilta Soft-Shell Case for Advanced Ring Grip?

A: No, the Tilta Advanced Ring Grip does not include a case.

Q: 5. Is the a usb c to ptap power cable that can be used to power this from a USB-C Powerbank?

A: Connect the D-Tap output of the Tilta Power Supply Base Plate for DJI RS 2 BH #TIGAPBP wit this adapter cable: GyroVu D-Tap to USB Type-C Regulated Adapter Cable (30") B&H # GYVDTAPUSBC MFR # GV-DTAP-USBC 5 Reviews Key Features Connects D-Tap Battery to USB-C 30" Cable Length 2A Output Current Built-In Current Electronic Stabilizer 10-24V Input

Q: 6. Would this be compatible with the Blackmagic 6K Pro?

A: Yes, The Tilta Top Camera Support Bracket for DJI Gimbals is a Universal solution that would support many camera models including the Pocket Camera models from Black Magic. *Please note that you will need to attach a shoe mount on top of your BM6K pro like the following. BH #AL1657 https://bhpho.to/3rp3izQ

Q: 7. Will this work with the DJI Ronin RS3 Pro? Thank you

A: Yes, the DJI RS2 shares the same accessories as the DJI RS3 and RS3 Pro.

Q: 8. can anyone tell me if it is compatible with a BMPC4K mounted on RS2? I read a review on amazon that says there is no compatibility because the BMPC4K is too wide, I would like to confirm that.

A: Yes, the Blackmagic Pocket Cinema Camera 4K is too wide for the Tilta Top Camera Support Bracket to fit properly on the gimbal.

Q: 9. My question is about the power distribution of this Tilta ring. Seeing as the gold mount power plate for this ecosystem doesn't work with most gold mount batteries (if it were rotated 90 degrees it would - oops), I am looking at attaching a gold mount battery via a 3rd party clamp, and trying to connect that power to the ring via a cable. Do the D taps of the 'Tilta Power Supply Modules ' ACCEPT power as well as give it? If so I can plug into one, and make up to 3 more hot power modules for accessories, and also power the gimbal?

A: Unfortunately the D-Tap port is only a power output, meaning you will need to power the Ring Grip via a Battery Plate or the gimbal's Battery Handle!

Q: 10. Can I mount the 3D focus on the Tilta Top Camera Support Bracket for DJI RS 2 Gimbal? If I use this bracket on my camera it take the place of the 3D focus (shoe mount on the top of the camera).

A: Yes, this should work for mounting the 3D focus unit without issue.