The white Selador Desire D60 Studio Tungsten Luminaire with Stage Pin Connector from ETC uses high-output, Tungsten-Balanced LEDs to create a fixture suitable  for video, film, and other white light only applications where color temperature and skin-tone rendering are critical. It offers a rugged die-cast enclosure, quiet, fan-cooled operation, multiple lens options, and an advanced user interface that enables easy configuration and specific features for video and film professionals.

The fixture can be configured to operate under control of a studio lighting control desk or via standalone, no console required settings for location lighting. The D60 Studio Tungsten contains sixty energy-saving 3000 K LEDs for high-intensity, non-variable warm-white output. It provides an enhanced color rendering to the eye, particularly at high color temperature settings.

The Studio Tungsten features the all-white Luxeon Rebel ES LEDs and outputs large quantities of white light while using a mere 161W of power. The Studio Tungsten array produces warm, white light with a 3000 K color temperature.

60 LED variable white light wash fixture

IP20-rated for indoor use

Power and DMX In / Through connections for easy setup (DMX512 in and through via 5-pin XLR connectors)

User-friendly control interface with multiple modes and fixture settings for console-free operation

Rugged die-cast all-metal housing

Easy access slots for secondary lenses and accessories

Up to 9 fixtures can be linked via power in/thru connectors per 15A circuit using 1.0mm2 cables as supplied

Requires power from a non-dim source

Studio Tungsten's red-shift option emulates tungsten dimming performance characteristics

Fixture comes with a 25° lens

Multiple control options including strobe and console-free Master / Slave mode

15-bit virtual dimming engine provides smooth, high quality theatrical fades

RDM functionality for address and setting changes

Active electronic thermal management for droop-free operation

Low-noise fan cooling; the fan is thermostatically controlled to run as needed with 60% speed at high intensities in room temperature

Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing

The fixture uses Luxeon Rebel ES emitters specified by strict binning standards

Studio control mode allows fixtures to be operated with no DMX console required

Related Questions and Answers

Q: 1. How to adjust color temperature?

A: The Godox SL-200 is set to 5600K.

Q: 2. Is AC power supply included?

A: The AC adapter is included.

Q: 3. Anyone have a light meter reading on this? Say 100 iso, shutter 60, f 2.8 at 10 feet with standard reflector?

A: You should be able to get a reading of 30,000Lux at 1m.

Q: 4. How could I shoot this light into a Paul C Buff 86" PLM?

A: You can use the umbrella mount.

Q: 5. May I kindly inquire if the Altman Spectra Cube UV can be used without DMX accessories?

A: Yes, the Altman Spectra Cube UV LED Wash Luminaire (Black) can be used with out DMX. It can be set to stand-Alone mode.

Q: 6. reviews of etc4?

A: Unfortunately, none of our customers have reviewed this product yet. Please check back periodically for any updates.

Q: 7. Can I switch out the lens barrel with an legacy Source 4 ellipsoidal barrel? Are the colorsouce Spot V barrels interchangeable

A: Yes, end-users can swap out extension tubes on the ETC ColorSource Spot V Please see what we have available. https://www.bhphotovideo.com/c/accessories/Lens--Lens-Tubes-for-the-ETC-ColorSource-Spot-V-Black/1736604-REG-87671

Q: 8. Does this use a ballast?

A: No.

Q: 9. Is this (200w) bright enough to use as a key when lighting interiors (architecture - stills), using window and other light as fill?

A: Yes, this LED light would offer plenty of light output.

Q: 10. Does this come with the lens tube? if so what degree?

A: No, the ETC ColorSource Spot V Light Engine with Shutter Barrel (Black) does not come with a lens tube.