The white Selador Desire D60 Studio Daylight Wash Luminaire with STG Pin Connector from ETC uses high-output, white light LEDs to create a suitable fixture for video, film, and other white light only applications where color temperature and skin-tone rendering are critical.

It offers a rugged die-cast enclosure, quiet, fan-cooled operation, multiple lens options, and an advanced user interface that enables easy configuration and specific features for video and film professionals.

The fixture can be configured to operate under control of a studio lighting control desk or via standalone ‘no console required’ settings for location lighting. The D60 Studio Daylight contains sixty energy-saving 5600 K LEDs for high-intensity, non-variable cool white output. It provides enhanced color rendering to the eye, particularly at higher color temperature settings such as 5600 K. This round, PAR-shaped washlight is well-suited for stage, studio, and places where brightness and color flexibility are required.

The Studio Luminaire comes with 60 powerful emitters that produce stronger light output than other LEDs. The D60 Studio Luminaire is designed for indoor broadcast, theater, or architectural uses.

60 LED variable white light wash fixture

CE compliant, ETL listed to UL1573, the standard for stage and studio lighting units

IP20-rated for indoor use

Power and DMX In / Through connections for easy setup

User-friendly control interface with multiple modes and fixture settings for console-free operation

Rugged die-cast all-metal housing

Easy access slots for secondary lenses and accessories

Uses 225mm lenses and accessories

Hanging yoke standard, yoke / floor stand sold separately

Neutrik power in and through connections

DMX512 in and thru via 5-pin XLR connectors

Up to 9 fixtures can be linked via power in/thru connectors per 15A circuit using 1.0mm2 cables as supplied

Requires power from a non-dim source

Rebel ES white light emitters for higher output

Studio Daylight's optional red-shift option emulates tungsten dimming performance characteristics

Fixture comes with a 25° lens

Additional secondary lenses available for multiple beam spread options

Multiple control options including strobe and console-free Master / Slave mode

15-bit virtual dimming engine provides smooth, high quality theatrical fades

RDM functionality for address and setting changes

Active electronic thermal management for droop-free operation

Low-noise fan cooling

Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing

Primary field angle of 17°

Native field angle of 18°

The fan in this D60 fixture is thermostatically controlled to run as needed with 60% fan speed at high intensities at room temperature

Studio profile Quick Set enables control of intensity from luminaire U/I with no console required

Linear dimming curve

Regulated output for intensity stability

The fixture uses Luxeon Rebel ES emitters specified by strict binning standards

The fixture with non-variable single-color daylight array such as Studio Daylight can use standard color correction filters (Rosco 3314, Rosco 3316 or similar) to achieve desired on-camera result

On-camera LED response varies with different cameras and settings

Daylight LEDs can appear slightly greener than other 5600 K sources on camera

Studio control mode allows fixtures to be operated with no DMX console required

Compatible with 25°, 35°, 45°, and 75° round field diffuser lenses and 20 x 40°, 30 x 70° and 35 x 80° oblong diffuser lenses (sold separately)

IP20-rated D60 for indoor use

Related Questions and Answers

Q: 1. How far out does the light reach?

A: I use it at pretty close range but the furthest Ive used (and still had pretty strong light) is about 20 feet on full brightness

Q: 2. When using the Dracast semi-rigide filter set with the barn doors, can you stack multiple filters in the designated slot, for example, a 1/2 CTO + frost diffusion? Is it worth it paying extra for these filters vs regular gels?

A: Claude, Yes, you CAN stack multiple filters. They are thin enough that you should be able to put two or three in there. More than that will be likely to reduce the light output below a usable threshold. -- Also, if you have any other technical questions, feel free to contact us directly at any time

Q: 3. Is there any way to get a replacement battery panel for this light?

A: The batteries are just AA' batteries...

Q: 4. Can this fit both the conversion and diffusion filters at the same time?

A: Yes both will fit at the same time.

Q: 5. How long do these lights last running on AA batteries only?

A: The run time would depend on the type of AA batteries being used.

Q: 6. Does this come with power adapters?

A: Yes. This light comes with an AC power supply/adapter. // Also, if there are any other technical or product related questions, feel free to contact us directly at any time at support@dracobroadcast.com.

Q: 7. Does this lighting kit come with a carrying bag?

A: Sorry, a bag is not included.

Q: 8. Does the Dracast LED 1000 Pro Daylight put out more foot candles when using the CTO correction for 3200K mode then the Bi-Color 1000 does when in 3200K mode?

A: According to the manufacturer, the LED 1000 Pro Daylight LED Light would have more output with a CTO filter attached to it than the LED 1000 Pro Bi-Color LED Light when set for 3200 Kelvin.

Q: 9. Do these lights flicker/strobe?

A: No.

Q: 10. Can I purchase this in a two unit kit as per the 'Dracast LED1000 Pro Bi-Color LED 2-Light Kit with Stands and V-Mount Battery'?

A: Here is the link to the 2-light kit: https://a href= http://www.bhphotovideo.com/c/product/1092488-REG/dracast_dr_lk_2x1000_bv_led1000_pro_bi_color_led.html target= _blank www.bhphotovideo.com/c/product/1092488-REG/dracast_dr_lk_2x1000_bv_led1000_pro_bi_color_led.html/a // // Also, if there are any other technical or product related questions, feel free to contact us directly at any time at support@dracobroadcast.com.