Surf, stream, and side-quest with speed thanks to the 50' Entegrade Cat 7 S/FTP Double-Shielded Ethernet Patch Cable in blue from Monoprice. Designed to deliver faster performance than Cat 6A cables, the Entegrade Cat 7 cable sports up to 600 MHz of bandwidth and supports 10-Gigabit Ethernet. Utilizing 26 AWG strands, the Monoprice Entegrade Cat 7 measures 5.7mm in Diameter, constituting a 30% slimmer build than cables using larger 23 AWG wiring. Complementary to its profile, the inclusion of a snagless Flexboot is intended for easy insertion and removal while gold-plated contacts ward against corrosion.

Supports 10-Gigabit Ethernet    Up to 600 MHz Bandwidth    5.7mm Diameter    Gold-Plated Contacts    Limited Lifetime Warranty

The S/FTP design of the Monoprice Entragrade Cat 7 Cable includes individual twisted pairs of wire, wrapped in foil, and then wrapped again in a supple braid screen. This double-shielding is intended to produce lower crosstalk or interference, as well as better grounding, both of which engender higher transfer speeds.

Related Questions and Answers

Q: 1. will this work with the Panasonic g9ii?

A: Yes, the Kondor Blue D-ap to DMW-BLK22 Dummy battery cable works with the Panasonic G9 II.

Q: 2. suitable for sony z 150 camera?

A: Yes, the Sony Z150 has a LANC connection. If you need to extend a LANC controller with that camcorder you can use this extension cord.

Q: 3. Could this work with the feelworld 7in monitor?

A: There is no locking collar on the FeelWorld 7" 4K Ultra-Bright Monitor. We feel this cable will do the job. CAMVATE D-Tap to DC Barrel Cable (Coiled) BH #CAC2399 • MFR #C239

Q: 4. Can this work with the Blackmagic Video Assist if used with a 12V Dtap Output?

A: Not that we are aware of.

Q: 5. Will this work with the SmallHD 702 Touch's threaded barrel AC input? It has a thread. Is the polarity compatible?

A: The size specs are the same but explicit polarity details are not available.

Q: 6. Will this work on the shinobi 7 ?

A: This is the correct locking cable that connects to the Shinobi battery eliminator. It is a locking cable. Atomos D-Tap to DC Barrel Coiled Cable BH #ATOMDTPCB2 • MFR #ATOMDTPCB2 https://www.bhphotovideo.com/c/product/1493127-REG/atomos_atomdtpcb2_d_tap_to_dc_barrel.html?sts=pi&pim=Y

Q: 7. Wll this work on an Atem Mini Pro?

A: no it will not

Q: 8. Are they the new cable with indicator lights and reverse polarity?

A: No, the Kondor Blue Coiled D-Tap to Locking DC 2.5mm Right-Angle Cable (16 to 50") does not list indicator lights and notification of reverse polarity. Consider instead the Kondor Blue Straight D-Tap to DC 2.5mm Right-Angle Cable (15") or a smart D-Tap connector. See the link below: https://bhpho.to/3PSNB1w

Q: 9. I'm trying to externally power a GH6 with the new 2.2 Firmware to record to an SSD drive. I have been powering the camera with a big PD battery with the USB-C input on the camera, it works great, but now I need the USB-C port on the camera for the SSD. I have a dummy battery to USB-C adapter but the SSD option won't work with PD battery with the Dummy Battery/USB-C configuration. This Kondor Blue Dummy battery seems to be the solution, I'm new to D-Tap - what battery do I buy? There are none listed in the accessories for the Kondor Blue. Also, what do i need to power the GH6 from 110VAC using this Kondor Blue?

A: Any battery will that is a 98 wh. Please review and see what we have available be mindful that a charger will be needed in order to charge battery https://bhpho.to/3y2oShD

Q: 10. Is this cable long 50' and can be used with Varizoom and Canon camera with LANC (Canon HF G30)?

A: All I have is Sony, but It is a standard LANC extension, I don't see why it wouldn't work on any equipment that accepts its connections.