Pair your select Canon camera to the ONsite Relay System with this Tether Tools Relay Camera Coupler Canon LP-E12 Batteryfrom Tether Tools. In this case, it takes the place of the LP-E12-type battery pack and provides a connection to the power source for long-term, continuous operation of your camera. This setup can easily be swapped out with another coupler to provide you with compatibility across camera systems.

Connects Camera to ONsite Relay System    Slides into Camera Battery Slot

EOS Rebel SL1
EOS M50
EOS M100
PowerShot SX70 HS

Related Questions and Answers

Q: 1. Does this item have its own battery capacity to facilitate hot swapping? Looks like it doesn't...

A: ...you need also the relay for this item. The relay has its own battery!

Q: 2. Will this work with the Canon R5? If not which one will?

A: Yes it will!

Q: 3. These adapter must to be conected to which power suply? thanks

A: The Relay Camera Coupler for Canon Cameras with LP-E10 battery gets its power from the Tether Tools Case Relay Camera Power System B&H # TECRUPS110 https://www.bhphotovideo.com/c/product/1235872-REG/tether_tools_crups110_case_relay_camera_power.html

Q: 4. On a Canon M5, you can't operate the camera without closing the battery door. As far as I can see, there is also no cable outlet of any kind. How is this product physically able to work?

A: You should be able to make it work with the M5 without keeping the battery door open. Canon sells a similar coupler to this for the M5 that plugs into the wall. Ours is meant to plug into a USB battery pack.On the bottom of the inside of the door, do you see a silver piece with a round hole? The version I've found has a number 3 on that rubber piece, but yours may be different. That rubber piece should pop out and you would plug the cable into the coupler through that hole.

Q: 5. Will this work with a Canon EOS R?

A: No, to use the Case Relay Power System with the Canon EOS R, the required battery coupler is the CRCE6 coupler.

Q: 6. Does this work with a Canon 77d?

A: It looks like the 77d uses the same battery (LP-E17) that the 5D Mk III uses, so yes, it will work.

Q: 7. Will this work to power my Canon R5 to replace the LP-E6NH battery?

A: The Tether Tools ONsite Relay Camera Power System Kit with Coupler for Canon Cameras with LP-E6 Battery can replace the Canon EOS R5 Mirrorless Camera's battery. This will allow you to power the camera with a USB battery pack.

Q: 8. Will it work on my Canon 5DSR? And how long is the wire/cable if I will connect from camera to power outlet?

A: Yes. The Tether Tools ONsite Relay Camera Power System Kit with Coupler for Canon Cameras with LP-E6 Battery is compatible with the Canon 5DSR camera and the cable is about 40 inches long.

Q: 9. is. this coupler compatible with the GH5mark 2?

A: No, the Tether Tools Relay Camera Coupler for Panasonic Cameras with DMW-BLF19 Battery is not compatible with the Panasonic Lumix GH5 II Mirrorless Camera (BH #PADCGH5M2). Instead you will need a dummy battery like the Kondor Blue DMW-BLK22 Dummy Battery to DC 1.35/3.5mm Coiled Cable (16 to 36"), BH #KODCBLK22.

Q: 10. Does anyone have experience using this system with the Nikon D750?

A: The Tether Tools Relay Camera Coupler for Nikon Cameras with EN-EL15C Battery with the Tether Tools Case Relay Camera Power System works great with the Nikon D7500. You could use any battery with a usb port. The Power System has a built-in battery that will allow you to change batteries without losing power to the camera. You could also use this system for AC power by adding a USB to AC adapter.