Production crews looking to protect and transport their Z Cam E2 professional 4K cinema camera will be impressed with the Porta Brace PB-ZCAME2 Superlite Waterproof Hard Case, a waterproof case made from unbreakable TTX01 high-strength resin. It includes an adjustable padded divider kit to effectively customize the interior to perfectly accommodate your gear.

Thanks to the retractable aluminum handle, built-in rolling wheels, and super-soft rubber handle grips, the case is easy to transport between shoots. With its carry-on size and integrated air pressure release valve, the PB-ZCAME2 is designed for safe travel on flights. The double-hinged locking system helps keep your equipment safe between productions and opens without snapping.

For Z Cam E2 Pro 4K Cinema Camera    Unbreakable, High-Strength TTX01 Shell    Customizable Interior Divider Kit    Retractable Handle and Built-In Wheels    Watertight and Airtight    Double-Hinged Locking System    Super-Soft Rubber Handle Grips    Air Pressure Release Valve    Limited Lifetime Warranty

The PB-ZCAME2 is a wheeled, airline carry-on-size hard case with a special divider kit system specifically designed for use with DSLR kit setups (camera bodies, lenses, flashes, and other accessories). It has a retractable aluminum handle and smooth-rolling wheels. Double-hinged latches lock tight for increased security and open without snapping.

The exterior hard case is air and watertight. It is made using a patented, unbreakable TTX01 high-strength plastic resin that is 10% lighter than the leading hard case brand. There is an air pressure relief valve that allows you to relieve pressure slowly so as not to damage lenses or other delicate camera components. Comfortably carry the case with the super-soft grip handle.

The interior divider kit is made using soft loop-fabric material that is non-abrasive to equipment and also attaches to the touch-fastener-based dividers at any point of contact. This allows you to fully customize the interior according to your current equipment needs.

The divider kit comes with ten 4" padded dividers and one 17" padded divider. The dividers are copper-colored for improved visibility of equipment inside the case. There's also a padded organizer with a mesh slip-pocket for the interior lid.

Related Questions and Answers

Q: 1. Can I replace the foam with a padded insert that I can divide up?

A: Yes, you can replace the foam.

Q: 2. Is this cable capable of shooting Prores Raw with Atomos Ninja V?

A: You should have no trouble shooting raw with this cable.

Q: 3. Does Fujinon MK lens fit snuggly with this adapter ?

A: Yes, the Fujinon MK18-55mm T2.9 Lens (Sony E Mount version), would fit well into the Viltrox E-T10 E-Mount Adapter for Z CAM E2.

Q: 4. How do you orient the Z9 inside this case?

A: The Nikon Z9 can be oriented with the hot shoe facing up in the Porta Brace PB-Z9DK.

Q: 5. All the recording specs are stated as internal recording. Can all those same formats also be recorded via USB-C to an external SSD, especially the 120 fps in both H.265 10bit and H.264 8bit?

A: The USB Type-C port can also be used for external SSD recording we presume at the same specs.

Q: 6. Could this be used for the E2-S6?

A: The Z CAM ZBlade for E2-F6 Pro memory currently is only supported when using the E2-F6 Pro camera from Z-Cam.

Q: 7. Would this case fit a C100 mark l with lenses & accessories? Right now all I’ve got is a soft case and it’s not cutting it anymore. I quickly ran out of space.

A: The answer completely depends on the number of lenses and accessories. For a typical rig, couple of lenses, a few small accessories, yes, this would be fine. You might also consider this custom built case. HPRC C100-2600-01 Case for Canon EOS C100 Camera B&H # HPC100260001. However, I would recommend that before you buy, you lay out the gear on a table with 2-3 inches of spacing and measure that. You will get a very good idea of what you will need. If the case gets too big, consider a separate case for the lenses. On location you can leave the big case in the vehicle and hand carry the camera and the lens case.

Q: 8. Will this case fit the ASUS G834JYR-XS97 18" with dimensions of 15.71 x 11.57 x 1.21"? I am concerned about the interior 1.21”

A: The PortaBrace PB-2650LSO Laptop Sleeve Insert for the PB-2650 Hard Case is not a case by itself; it is a sleeve insert for a Pelican 1560 Series hard case. It will only fit laptops up to 17".

Q: 9. Older reviews complain that the lens does not mount firmly, has wobble. Has any newer version E-mount to Z Cam resolved this?

A: Currently Viltrox has no published data on another model of the Viltrox E-T10 E-Mount Adapter for Z CAM E2.

Q: 10. Do any of the lens mount adaptors work with the electronic controls of this mount? (aperture and metadata) I'm interested to get a mount adaptor to EF.

A: Yes, the Viltrox E-T10 E-Mount Adapter for Z CAM E2 will allow aperture control and metadata communication. Please be mindful that the unit will only adapt to the Z CAM E2-M4/S6/F6/F8 Cameras and must be updated to the latest firmware.