The white Shure ULXD6/C is a digital tabletop transmitter equipped with a cardioid boundary mic and compatible with ULX-D receivers. The cardioid polar pattern focuses audio capture in front of the mic and rejects much of the off-axis ambient noise, great for picking up one speaker or allowing two panelists sitting next to each other at a large table to share a single mic. The unit's low profile is ideal for applications such as video-conferencing where minimum visibility is required. A smart choice for situations where wired mics are impractical, this tabletop transmitter enables quick setup and tear down, and can be put away in a docking station (available separately) for storing and charging when the mic is not in use..

With rugged, yet lightweight plastic housing, the ULXD6/C transmitter delivers pristine 24-bit/48 kHz audio quality and RF performance over its entire 330' range. It offers AES 256-bit encryption for secure transmission and advanced rechargeability options, making it suitable for use in large meetings at conference and convention centers.

For ULX-D Digital Wireless Systems    Built-In Cardioid Boundary Mic    1/10/20mW RF Output Power    Configurable Mute Button with Status LED    High-Pass Filter Reduces Noise    Secure AES-256 Encryption    Networked Intelligent Charging    9 Hr with SB900A Rechargeable Battery

• The mute button that can be configured for momentary or push-on/push-off operation, with a bicolor LED indicating the mute status.
• The unit quickly syncs with a wireless receiver via infrared at the touch of a button.
• The high-pass filter reduces low-frequency noise caused by table vibration or air-conditioning systems.
• A power lockout function disables the power switch and prevents accidental changes during events.
• 1/10/20mW selectable RF output power allows you to increase either the transmitter's range or the number of mics operating simultaneously.
• Low latency makes the ULXD6 ideal for meetings that require live sound reinforcement.
• The transmitter is compatible with the full line of Shure's antenna-distribution components.

• The unit operates for up to 8 hours and 40 minutes on two AA batteries.
• An optional Shure SB900A lithium-ion rechargeable battery pack offers intelligent power management with over 9 hours of battery life, precision metering in hours and minutes, and zero memory effect.
• A USB port allows for docked battery charging with the SBC450 (4-bay) and SBC850 (8-bay) networked charging stations (available separately).
• The charging stations enable remote power monitoring via Shure's Wireless Workbench software.

Related Questions and Answers

Q: 1. can you use these wired with a 3.5mm jack? Description says so but want to check

A: Yes, the Shure AONIC 40 Noise-Canceling Wireless Over-Ear Headphones can be used wired with a 3.5mm cable. A cable is included in the box.

Q: 2. how do you access settings w/o rx unit? all settings still available on PC with software?

A: Dear Customer, You can refer for settings in the user manual via this link https://www.dji.com/global/mobile/mic-2/downloads?startPoint=145 Should you need any further assistance, please feel free to contact our DJI support at http://www.dji.com/support, we are always here to help. Best Regards, DJI Support

Q: 3. Will this work with the Rs3 gimbal?

A: The DJI Wireless Video Transmitter is only supported on The DJI RS2 or RS3 PRO gimbals at this time.

Q: 4. Will this mic work as blutooth mic for Insta360?

A: The DJI Mic 2 Clip-On Transmitter/Recorder is not compatible with the Insta360 X3. To make it compatible, you would need a compatible receiver like the one found in B&H # DJMIC21TX1RX, along with the external mic adapter for the Insta360 X3: B&H # IN360X3MA

Q: 5. Can I use the headphone output to input to a camera?

A: You can take audio out from the headphone output, but it is line level. Also, this mic must be connected to a computer for power and to control the volume level to the headphone out.

Q: 6. What is the range of the microphones?

A: The pick-up range of the omnidirectional boundary microphones included with the Alfatron WMP4 Wireless Conference System with 4 Boundary Microphones (2.4 GHz), BH # ALFWMP4, is approximately 6.6' in all directions.

Q: 7. Is it the same item as it is describe in your site?Do you ship this item to a FPO, AP address?Thanks!

A: The product we ship is the same product as described above. We will be happy to ship this microphone to an FPO, AP address for you.

Q: 8. DJI is panning to sell just receivers with no monitor like teradek?

A: As of right now, there is no news on a stand alone wireless receiver from DJI.

Q: 9. Is glxd1+ transmitter compatible with glxd4 receiver?

A: No, the Shure GLXD1+ Dual-Band Wireless Bodypack Transmitter (Z3: 2.4, 5.8 GHz) is not compatible for use with the Shure GLXD4 Digital Wireless Receiver (2.4 GHz) - B&H # SHGLXD4Z2, which operates on the 2.4 GHz frequency band only. Shure's single-band GLX-D series was discontinued and replaced by the updated dual-band GLX-D+ series. Unfortunately, the GLX-D+ components are not backwards compatible, so the GLXD1+ Transmitter cannot be used with the GLXD4 Receiver. The GLXD1+ Transmitter is intended for use with the Shure GLXD4+ Dual-Band Wireless Tabletop Receiver (Z3: 2.4, 5.8 GHz) - B&H # SHGLXD4Z3 and the Shure GLXD4R+ Dual-Band Wireless Rack Receiver (Z3: 2.4, 5.8 GHz) - B&H # SHGLXD4RZ3. For a bodypack transmitter to use with the GLXD4, you will need to use the older, discontinued single-band Shure GLXD1 Digital Wireless Bodypack Transmitter (2.4 GHz) - B&H # SHGLXD1Z2 or you can replace the system (transmitter and receiver) with the new components.

Q: 10. Do y'all think the latency is fast enough to pull focus?

A: No, the DJI Wireless Video Transmitter does not provide stable enough signal to use for focus pulling reliably and with consistency of transmission.