The white Shure ULXD6/O Wireless Boundary Mic Transmitter White H50is a digital tabletop transmitter equipped with an omnidirectional boundary mic and compatible with ULX-D receivers. The omnidirectional polar pattern provides 360° pickup, allowing several speakers at a small table to use a single mic. The unit's low profile is ideal for applications such as video-conferencing where minimum visibility is required. A smart choice for situations where wired mics are impractical, this tabletop transmitter enables quick setup and tear down, and can be put away in a docking station (available separately) for storing and charging when the mic is not in use.

With rugged, yet lightweight plastic housing, the ULXD6/O transmitter delivers pristine 24-bit/48 kHz audio quality and RF performance over its entire 330' range. It offers AES 256-bit encryption for secure transmission and advanced rechargeability options, making it suitable for use in large meetings at conference and convention centers.

For ULX-D Digital Wireless Systems    Built-In Omnidirectional Boundary Mic    1/10/20mW RF Output Power    Configurable Mute Button with Status LED    High-Pass Filter Reduces Noise    Secure AES-256 Encryption    Networked Intelligent Charging    9 Hr with SB900A Rechargeable Battery

• The mute button can be configured for momentary or push-on/push-off operation and features a bicolor LED indicating the mute status.
• The unit quickly syncs with a wireless receiver via infrared at the touch of a button.
• The high-pass filter reduces low-frequency noise caused by table vibrations or air-conditioning systems.
• A power lockout function disables the power switch and prevents accidental changes during events.
• 1/10/20mW selectable RF output power allows you to increase either the transmitter's range or the number of mics operating simultaneously.
• Low latency makes the ULXD6 ideal for meetings that require live sound reinforcement.

• The unit operates for up to 8 hours and 40 minutes on two AA batteries.
• An optional Shure SB900A lithium-ion rechargeable battery pack offers intelligent power management with over 9 hours of battery life, precision metering in hours and minutes, and zero memory effect.
• A USB port allows for docked battery charging with the SBC450 (4-bay) and SBC850 (8-bay) networked charging stations (available separately).
• The charging stations enable remote power monitoring via Shure's Wireless Workbench software.

Related Questions and Answers

Q: 1. Can you use this transmitter on the RS3 Pro in conjunction with the RavenEye transmitter at the same time? Or is it one OR the other ?

A: Unfortunately, the DJI Wireless Video Transmitter cannot be used simultaneously with the DJI Ronin RavenEye Image Transmission System for RS 2 & RSC 2 when mounted and powering through a gimbal, but if you are able to power the DJI Wireless Video Transmitter away from the gimbal and you have HDMI and SDI simultaneous output from the camera, both transmitters can be used.

Q: 2. can you use these wired with a 3.5mm jack? Description says so but want to check

A: Yes, the Shure AONIC 40 Noise-Canceling Wireless Over-Ear Headphones can be used wired with a 3.5mm cable. A cable is included in the box.

Q: 3. What is the range of the microphones?

A: The pick-up range of the omnidirectional boundary microphones included with the Alfatron WMP4 Wireless Conference System with 4 Boundary Microphones (2.4 GHz), BH # ALFWMP4, is approximately 6.6' in all directions.

Q: 4. Will this work with the Rs3 gimbal?

A: The DJI Wireless Video Transmitter is only supported on The DJI RS2 or RS3 PRO gimbals at this time.

Q: 5. Does this microphone have Automatic Gain Control?

A: This microphone does not offer an AGC. Gain levels are adjusted manually.

Q: 6. What are the cable's connections?

A: The MX396 is supplied without a connector. Typically, an installer will use phoenix block-type connectors or XLR connectors on the cable. It is OK to separate the cable wires out to three separate XLR connectors.

Q: 7. Will this mic work as blutooth mic for Insta360?

A: The DJI Mic 2 Clip-On Transmitter/Recorder is not compatible with the Insta360 X3. To make it compatible, you would need a compatible receiver like the one found in B&H # DJMIC21TX1RX, along with the external mic adapter for the Insta360 X3: B&H # IN360X3MA

Q: 8. Can I use the headphone output to input to a camera?

A: You can take audio out from the headphone output, but it is line level. Also, this mic must be connected to a computer for power and to control the volume level to the headphone out.

Q: 9. Will this transmitter attach to the Ronin 4D?

A: At this time, for the DJI Ronin 4D 4-Axis Cinema Camera 6K we recommend using the DJI Ronin 4D TX2 Video Transmitter BH #DJVTR4D • MFR #CP.RN.00000178.01 which is designed for the 4D.

Q: 10. DJI is panning to sell just receivers with no monitor like teradek?

A: As of right now, there is no news on a stand alone wireless receiver from DJI.