The white Shure ULXD8 Wireless Transmitter G50 470-534 MHzis a digital wireless base transmitter for Shure Microflex gooseneck microphones (available separately) and is compatible with ULX-D receivers. The gooseneck design allows you to place the mic close to the speaker and above the table surface, away from paper rustling or other noises. Ideal for use where wired mics are impractical, this tabletop transmitter is designed for quick setup and tear down, and can be put away in a docking station (available separately) for storing and charging when the mic is not in use.

With rugged, yet lightweight plastic housing, the ULXD8 transmitter delivers pristine audio quality and RF performance, AES 256-bit encryption for secure transmission, and advanced rechargeability options, making it suitable for use in large meetings at conference and convention centers.

For ULX-D Digital Wireless Systems    Works with Shure Microflex Gooseneck Mic    1/10/20mW RF Output Power    Configurable Mute Button with Status LED    High-Pass Filter Reduces Noise    Secure AES-256 Encryption    Networked Intelligent Charging    9 Hr with SB900A Rechargeable Battery

• The unit delivers clear, reliable 24-bit/48 kHz digital audio over its entire 330' range.
• The base fits 5", 10", and 15" Microflex Series gooseneck microphones with either one or two bendable sections and a choice of polar patterns to suit different coverage needs— simply screw the mic onto the base.

• The mute button can be configured for momentary or push-on/push-off operation, with a bicolor LED indicating the mute status.
• The unit quickly syncs with a wireless receiver via infrared at the touch of a button.
• The high-pass filter reduces low-frequency noise caused by table vibration or air-conditioning systems.
• A power lockout function disables the power switch and prevents accidental changes during events.
• 1/10/20mW selectable RF output power allows you to increase either the transmitter's range or the number of mics operating simultaneously.
• Low latency makes the ULXD8 ideal for meetings that require live sound reinforcement.

• The ULXD8 operates for up to 8 hours and 20 minutes on two AA batteries.
• An optional Shure SB900A lithium-ion rechargeable battery pack offers intelligent power management with over 9 hours of battery life, precision metering in hours and minutes, and zero memory effect.
• A USB port allows for docked battery charging with the SBC450 (4-bay) and SBC850 (8-bay) networked charging stations (available separately).
• The charging stations enable remote power monitoring via Shure's Wireless Workbench software.

Related Questions and Answers

Q: 1. I have a G4 Receiver with 558-626MHz. Can I use the GW1 Transmitter with 558-608MHz?

A: Yes, you can use your G4 receiver with the Sennheiser SKP 500 G4 Pro Wireless Plug-On Transmitter GW1: (558 to 608 MHz) but you will be limited in the frequency channels that you can use to sync the transmitter and receiver. It is always recommended to use a transmitter and receiver in the same frequency band, for the most available frequency channels and best results.

Q: 2. Is the G4 (470-558MHz) compatible with an Ek100 G3 receiver (516-558MHz)?

A: Hi Brite - the two series are absolutely compatible as long as they are in the same range. As the AW+ range (470-448 MHz) transmitter extends beyond the lower frequencies of the A range EK 100 G3, you won't get the full benefit the transmitter is capable of for tuning, but you'll be able to scan with your EK 100 G3 and sync to the new SK 300 G4. Please note that the frequency presets will be different, though this isn't an issue when it comes to scan/sync capabilities.

Q: 3. Will this microphone work with the Sennheiser L 2015 Charger?

A: Yes, the Sennheiser L2015G2 Charging Station, BH #SEL2015G2 is the appropriate charger for this transmitter, with the Sennheiser BA 2015G2 Rechargeable Battery Pack, BH #SEBA2015G2 installed.

Q: 4. Am I able to use the lectrosonics IFB to tune into this transmitter? I didn't see an IFB mode.. just DHCT and DUET mode.

A: This unit is not compatible with the IFB model receivers. For an IFB receiver, you'd need a version of their IFBT4 transmitters in the corresponding frequency as the receiver. Such as this B&H # LEIFBT421.

Q: 5. Could I connect 2 of these (in the same frequency bank) to the Sony URX-P41D Dual-Channel Camera-Mount Wireless Receiver?

A: Yes, dual Sony UTX-M40 Wireless Handheld Cardioid Microphone Transmitters can be used with the Sony URX-P41D Dual-Channel Camera-Mount Wireless Receiver simultaneously if all components are on the same frequency band.

Q: 6. Is this compatible with the URX-P03D (stereo) receiver?

A: Yes,as lomg as both are in the same frequency bank and tuned to the same frequency.

Q: 7. I have the Sennheiser EW 112P G3-B Omni-directional EW system. Will this work with the G3 receiver?

A: Hi Brian - while Evolution Wireless G4 is backward compatible with EW G3, the products need to operate within the same frequency range. Your current product is the EW 112P G3 in the B-Range, which is 626-668MHz and the AW+ range of this SKP 500 is 470 - 558MHz, so they wouldn't be compatible. The larger issue is that the FCC has effectively banned wireless devices in the 600MHz range, effective July 13, 2020 - to help offset the costs of transitioning to new, legal devices, Sennheiser is offering a rebate on the trade-in of 600MHz products and the EW 112P G4 sets are also on sale through the end of April 2020 at B&H.

Q: 8. Is it possible to use this only as a recording device, and just have TC and rec Start/Stop over bluetooth?

A: Yes, the Audio Ltd. A10-TX-US Wireless Transmitter and Recorder can be used as a standalone recording device, without transmitting a wireless audio signal to a receiver.

Q: 9. WHAT RECEIVER DO I NEED FOR THIS?

A: Ideally you will get the EK500 receiver (for portable/camera work) or the EM500 for rack mount). It is also compatible with the 100 and 300 EW Evolution receivers, but in that case, not all frequencies of the transmitter will be available on the receiver. If you want it for camera work, this transmitter is also sold as a kit with a receiver, or as a kit with a receiver, body pack transmitter, MKE2 lav. Item# SEEW500BG4G1 and Item# SEEW500FILM1

Q: 10. Does this unit only provide limited frequency spectrum (15 Hz to 11.3 kHz)? I would like to use this as a compact IEM wireless solution but am concerned I wouldn't be able to hear my mix with fidelity after investing so much in this kit. I almost ordered this before catching the limited spec as there are no other body pack-sized (transmitter) solutions on the pro market for wireless IEM. Does anyone have any other recommendations?

A: The DCHT, like the M2T rack unit, provides 20 - 12 kHz audio frequency response with the M2R receiver. Although on paper that appears quite limited, the impression upon listening to it is that everything is there. By far most of the energy in a mix is between 50 Hz and 10 kHz, with harmonics extending above that. I would suggest giving it a listen and decide for yourself. If you have already used the M2T and M2R combination, then you are hearing the same thing you would hear with the DCHT and M2R.