The HDMI 2.0 Video Tester with Ethernet - BZBGEAR 18Gbps AnalyzerBG-AVTPG-4K HDMI 2.0 Video Tester with Ethernet - BZBGEAR 18Gbps Analyzeris a HDMI 2.0 test pattern generator and analyzer designed for professional A/V integrators and technicians. With a versatile array of functions and features, it's an essential part of any professional's toolkit. Capable of sending and receiving HDMI signals up to 4096 x 2160 4:4:4, this device makes it easy to test and verify functionality of AV cabling and equipment. Designed for the rigors of field use, the BG-AVTPG-4K is encased in a sturdy metal chassis with shock-resistant rubberized edges.

4096x2160@60Hz 4:4:4 8-Bit    4K2K@60Hz 4:2:0 16-Bit (HDR)    HDMI 2.0, HDCP 2.2

• The BG-AVTPG-4K is capable of generating a wide variety of test patters at resolutions up to 4096x2160@60Hz 4:4:4 8 bit and 4K2K@60Hz 4:2:0 16 bit (HDR). This portable device can be charged in as little as two hours with an operation time of up to four hours. Featuring an easy-to-use touchscreen interface, it is also equipped with a USB 2.0 port that can be used to connect a mouse for enhanced control.
• Loaded with useful functions including a cable tester, multiple static and moving test patterns, a multi-channel audio tone generator, and EDID reader, the AVTPG-4K makes short work of troubleshooting HDMI connection problems. By utilizing the Ethernet connection, this device can be placed remotely and controlled via IP commands.

The HDMI 2.0 input and output are HDCP 2.2 compliant, and form a test loop for verifying HDMI cable functionality. Eight channel LPCM with selectable sampling rate is available up to 192 kHz. The BG-AVTPG-4K supports a maximum bandwidth of 18 Gbps. The 3.5mm output provides a connection to test external audio systems. The USB 2.0 port provides connection for a mouse, and the RJ-45 port allows the unit to be operated remotely with IP commands.

• 4K2K@60 4:4:4 8bit, 4K2K@60 4:2:0 16bit HDR pattern generator
• 4.3 touch panel
• Supports mouse control
• Supports user control device through Ethernet
• Firmware update through USB Flash Drive
• Supports user defined pattern up to 2GB
• Embedded LINUX KERNAL system with limitless extension
• Scrambler supported for videos over 340MHz output wise
• Loop test capability to provide statistics analysis for connection stability
• Supports HDMI loop through function
• HDCP test allow verify HDCP of HDMI source and transmit HDCP encrypted video
• Qualified physical layer performance to ensure the best compatibility
• Battery powered for portability, it can extend operation time with full load up to 4 hours
• Rechargeable battery design with short charging time about 2 hours

Related Questions and Answers

Q: 1. Does this device show up as a webcam for use with VOIP services?

A: compatibility will vary dependent on the software being used. it may not work with VOIP

Q: 2. Hello. Will I be able to plug this camera into a monitor or smart TV via the HDMI cable and have it display? We are looking for a simple solution for a tradeshow demo with a single camera and up to 4 TVs (using an HDMI splitter). I'm trying not to have a laptop involved. Thank you.

A: The BZBGear 4K ePTZ USB/HDMI Conference/Education Camera BH #BZGEPTZUH4K will connect to a monitor via HDMI for live viewing for your stated application.

Q: 3. Does this camera have actual ePTZ functions? ie can I control virtual pan and tilt from a PTZ controller or serial control?

A: The BZBGEAR 4K ePTZ USB/HDMI Conference/Education Camera (B&H # BZGEPTZUH4K) supports ePTZ control of the 4x digital zoom function at 1080p resolution. This camera can be controlled via the included IR remote.

Q: 4. Can this matrix send the same feed to many different screens? (one feed to many outputs)

A: Yes, the BZBGEAR 16x16 4K UHD 18Gb/s HDMI Video Matrix with EDID/Downscaling/CEC can send the signal from one input to many outputs at the same time, up to every available connected output.

Q: 5. is it capable of showing all for feeds at once?

A: The BZBGear 4x1 8K60 HDMI 2.1 Switcher is just a switcher. In order to do what you are asking, it would be necessary to have a matrix, such as BZBGear 4x4 8K60 HDMI 2.1 Matrix Switcher with Scaler and Audio De-Embedder (BZBG8K44MA).

Q: 6. Will this work with Olympus E-P5 DSLR?

A: The Vanco HDMI to USB 2.0 Video Capture Device can support HDMI signals up to 1080p in 60 frames per second and as such should support the Olympus E-P5 through its HDMI connection.

Q: 7. Will this unit input and pass 10-bit color depth signals?

A: As the BZBgear 4-Channel Live Streaming Video Switcher/Audio Mixer uses YUV color space for video, it would pass an 8-bit 4:2:0 signal.

Q: 8. Will work on MacBook Pro?

A: Just as long as the computer has a standard USB 2.0 connection it will work. This supports Mac OS.

Q: 9. Can you connect to a phone to use phone a as a LQ monitor?

A: No, The ANDYCINE HDMI to USB 2.0 will allow a TV or computer to output but not a mobile device.

Q: 10. With this I could "monitor" audio signal from my Panasonic DC G100?

A: Theoretically you could use the audio output from this device to monitor the audio on your camera. However the audio output is not designed to be used as a headphone output. if your goal is get a haedphone output for your camera we recommend using a field monitor such as the FeelWorld F5 5.0" Full HD HDMI On-Camera Monitor with 4K Support and Tilt Arm BH #FEFWF5 • MFR #F5