Built for medium-range applications, the Bering Optics D-740FW 4x62 Night Vision Sightfrom Bering Optics D-740FW 4x62 Night Vision Sightoffers a crisp image, a red or yellow Mil Dot reticle with adjustable brightness, and 1/4 MOA impact point correction to dial in just the right trajectory. Its autogated Gen 3+ filmed white phosphor tube produces a black-and-white image, which many night hunters find easier to use and less fatiguing than traditional night vision green. Manual gain control allows you to achieve the brightest possible image in any light level without sacrificing the sharp detail of 64-76 lp/mm resolution. Nitrogen-filled (and refillable) fog-proof and IP67 waterproof, the sight will hold zero on medium-caliber rifles and can be used effectively with weapons up to .50 caliber. A pair of AA batteries will power the sight for up to 120 hours.

Autogated Gen 3+ White Phosphor Tube    Resolution: 64-76 lp/mm    Manual Gain Control    Red Mil Dot Reticle    Up to 575-Yard Detection Range    1/4 MOA Elevation & Windage Adjustment    Water & Fogproof    Holds Zero on Medium-Caliber Weapons    Runs 120 Hours on Two AA Batteries

• Autogated Filmed White Phosphor Tube
• 64-76 lp/mm resolution
• Manual gain control
• Protected from sudden exposure to bright light

• 4x magnification, 62mm objective
• 100mm f/1.5 lens system
• 9° angle of view
• Illuminated red or yellow Mil Dot reticle, adjustable brightness
• 630-yard detection range under quarter moon, 520 yards under cloud cover; recognition ranges of 495 and 365 yards, respectively

• 1/4 MOA windage and elevation adjustments
• Retains zero on medium-caliber weapons
• Suitable for use on rifles up to .50 caliber
• Picatinny/Weaver mount

• IP67 waterproof housing
• Nitrogen-filled fogproof with valve for refilling
• -40 to 122° operating temperature
• Shock-resistant construction
• Runs up to 120 hours on two AA batteries
• Measures 9.3" long, weighs 34 oz

Related Questions and Answers

Q: 1. Will I need an ef to rf adapter if trying to use on a Canon EOS R5?

A: Yes, to use the AstroScope Night Vision Adapter 9350-EOS-3PRO, on a Canon RF camera body, you would need to use the EF to RF adapter. (the power connection is important)

Q: 2. Is the Equinox Z2 an improvement over the Equinox Z? The "Z" is to grainy for my needs as a private investigator.

A: The Z and the Z2 are low end scopes. They will be grainy. The z had an effective of only 200' The Z2 is double that.

Q: 3. It displays the imagery on a 640 x 480 black and white screen. What is the recorded resolution to the memory card? Thank you.

A: The Barska NVX600 Digital Night Vision Binocular records at 320x240.

Q: 4. does it come with a neck strap?

A: A strap is Not included from the manufacturer.

Q: 5. what is the fps of the video capture?

A: Bushnell does not list FPS. In its manual it only list frame rate as slow, medium and fast

Q: 6. Does the Konus Konuspy have an SD slot or is the SD card built in? Would like to use an SD with more gigs.

A: It comes with a 8GB removable card. It can take up to a 32GB card.

Q: 7. Doescome with diopter lens or can unit be adjusted to my eyesight?

A: Yes. Both eyepieces have individual diopter adjustments.

Q: 8. does it use battery during the day? how long does the batteries work?

A: Since it is a digital device, it employs an image sensor and image display, therefore batteries are always required to operate the device regardless of what time of the day/night it is. Typical 2pcs of CR123A will work anywhere between 3hrs and 5hrs depending on the image display brightness, use of IR illuminator, video/wi-fi activation etc. We recommend powering the binocular via USB port with 5V/2A power bank device (similar to those used to charge cellphones). In this case working time can be extended up to 10-15hrs, depending on the power bank capacity.

Q: 9. What is the Country of Origin for the Konus 3-6x32 KonuSpy-11 Digital Night Vision Binocular BH #KO36X32KS11 • MFR #7932?

A: The Konus 3-6x32 KonuSpy-11 Digital Night Vision Binocular is made in China.

Q: 10. What kind of adapter will I need to hook this up to a Canon T5 I

A: No adapter is needed. It will mount directly on any Canon DSLR camera.