You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

P2p Interview System With 2x17" Teleprompters & Hdmi

P2p Interview System With 2x17" Teleprompters & Hdmi
  • Product Code: eq97115
  • Availability: In Stock

$10,197.00 $12,542.31

Create a natural one-on-one interview with both the subject and interviewer able to look at each other or the audience, square in the eye during the interview, with the P2P Interview System with 2x17" Teleprompters & HDMIfrom ikan.

The system allows you to set up the prompters on your cameras and tripods (not included), so that instead of words being read, the interviewer's image appears on the prompter that the subject is looking directly into, and the subject's image appears on the interviewer's prompter. This provides a more direct connection between interviewer and subject, focusing their attention on each other as opposed to interviews where the subject is looking off to the side of the camera and not making a good connection with your audience. In addition, with this system, you are free to set up each person separately, as they no longer have to be facing each other, or even in the same room.

The included prompters are designed for both location and studio work; they are lightweight, and quick to set up. Compatible with almost any camcorder that has a flat base or DSLR/mirrorless cameras, using the included risers. The PT3700 is a flexible system with a wide viewing screen. The hardware mounts on included 15mm rods, which allow the monitor, the prompter's beamsplitter glass, and the camera baseplate to be set up quickly, without requiring tools. Each component can easily be moved individually to adjust for different setups. To accommodate cameras with different heights, ikan includes 3, 5, and 8" height-adjustment rods for mounting the baseplate.

2 x PT3700 Teleprompters    17" Monitor with 1280 x 1024 Resolution    70/30 Beamsplitter Glass    Height-Adjustable Camera Baseplate    Glass Folds Down for Easy Transport    Custom-Cut Case Foam Included

Key Specs
Reading Range20' / 6.1 m
Size (Diagonal)17" / 43.2 cm
Inputs/Outputs1x HDMI Unspecified Version Input
1x VGA Input
1x Composite (BNC) Input
Self ReversingNo
Monitor 2 Size (Diagonal)17" / 43.2 cm
General
Reading Range20' / 6.1 m
Beamsplitter Ratio70/30
Beamsplitter MaterialGlass
Monitor
Size (Diagonal)17" / 43.2 cm
Maximum Brightness350 nits / cd/m2
Native Resolution1280 x 1024
Aspect Ratio4:3
Contrast Ratio1000:1
Viewing Angle (H x V)160 x 140°
Inputs/Outputs1x HDMI Unspecified Version Input
1x VGA Input
1x Composite (BNC) Input
Self ReversingNo
Output Voltage12 VDC at 4 A
Power Consumption10 W
Second Monitor
Monitor 2 Size (Diagonal)17" / 43.2 cm
Physical
Height AdjustmentNo
Dimensions25.0 x 14.5 x 14.0" / 63.5 x 36.8 x 35.5 cm
Packaging Info
Package Weight48 lb
Box Dimensions (LxWxH)24.5 x 19 x 10"

The adjustable beamsplitter glass frame on the PT3700 allows for fast and easy set up. The frame can also be folded to make the teleprompter compact and easy to transport.

The dual-purpose base plate supports various cameras, DSLR's, and small- to mid-sized cameras. The base plate comes with a DSLR shelf, which allows you to put a DSLR camera at the very edge of the base plate to get closer to the glass if needed.

The PT3500 includes 3, 5, and 8" height-adjustment rods for the baseplate, making the teleprompter more versatile for various sized cameras.

The PT3700 is based on a 15mm rod system design, making it lightweight, easy to use, and quick to set up.

The high-quality 70/30 teleprompter glass provides a balance between reflection and pass-through without distorting the image. This high-quality glass allows your camera to have a clear picture, while providing reflection you need to read the text.

Each PT3700 is shipped in reusable custom-cut foam, which will help keep the kit safe and organized when you set it up or break it down. The custom-cut foam can also be repurposed to perfectly fit in the SKB I Series 2918-10 Waterproof Hard Case.

Related Questions and Answers

Q: 1. Are these compatible with any of the foot pedals?

A: Yes, the Prompter People StagePro 24" High-Bright Presidential Teleprompter Pair Carbon Fiber Kit with Two Flight Cases ships with TeleScroll software and is compatible with the Prompter People Foot Pedal Remote 2, B&H # PRREMFOOT2 (https://bhpho.to/2KVhSsC).

Q: 2. It is mentioned that there's no looping output on the regular vga/hdmi monitors. But is there a looping SDI output on the high-bright monitors if that option is selected?

A: Like the other High-Bright monitors from Prompter People, the Prompter People StagePro 19" High-Bright Presidential Teleprompter Pair Carbon Fiber Kit with Two Flight Cases does have and SDI in and an SDI loop out.

Q: 3. They are in the picture, but are the hard cases included?

A: Yes, the hard cases are included in this kit.

Q: 4. This setup is listed as the same as the PTZ kit prompter, are the hoods the same or is this one smaller? The PTZ hoods are deeper to accommodate the PTZ cameras but I can't tell if these have the same hoods with the extensions folded up.

A: The two prompters are of different design and the parts used in the PTZ model are overall different from this model.

Q: 5. Is this bag compatible with the Prompter People PAL12?

A: We recommend this same cost bag. Prompter People Soft Bag for Select 15, 17, and 19" Teleprompters BH #PRBAGL • MFR #BAG-L.

Q: 6. I would just like to ask if we order the prompter people teleprompter that has 17 monitor size ($3,199), is the size of the mirror (beamsplitter) going to be upgraded to? Can it be upgraded from its standard size that is 14 x 12 to 14 x 14 ? We hope to get your immediate response today.

A: Hi Cecilia,I'm not aware of a 14 x 14 option for the beamsplitters. However, since the monitor is a 17 unit, everything on screen does fit nicely on the glass. You'd only need to increase the beamsplitter if you used screens that were not 4:3 or if you moved up to something larger than the 17 screen. To put it another way: the two inches gained would be on the width and you'll not gain anything in the re-flection. The key to maximum readability is to increase the size of the fonts in the software to make it readable to the speaker. Meanwhile the display size in that 4:3 reflection is only changed by increasing the size of the monitor. The later is far less important unless you'll have these out way out in front of the speaker. That's not generally the case. Hope this helps!

Q: 7. What's a good way to fix the color shifting this prompter causes?

A: Create a custom ICC profile using a colorimeter in order to color profile the display. Please review the following item. Datacolor SpyderX Elite Colorimeter BH #DASXE100 • MFR #SXE100 https://bit.ly/3ipdqay

Q: 8. Maximum weight supported

A: ikan states that the maximum camera weight supported by the ikan Professional 19" High-Bright Teleprompter Travel Kit (HDMI) would be up to 250 lb, but we would recommend only working with weights up to 35 lb that are typical for video cameras.

Q: 9. Do these monitors have an HD-SDI Input?

A: No. The available inputs are HDMI, VGA, Composite RCA. If you need to bring in an SDI source, we recommend using a simple HDMI to SDI converter, like the one featured here:https://bhpho.to/3nb2WZH

Q: 10. What inputs do the monitors have?

A: The Prompter People StagePro 24" High-Bright Presidential Teleprompter Pair Carbon Fiber Kit with Two Flight Cases (B&H# PROSP24HBCFK) includes Prompter People's High-Bright monitors which accept SDI (specifically HD-SDI), HDMI, and VGA.

04/09/2024

[48 lb] Simple design and easy to use

5
01/09/2024

[70/30] good priduct , good service

5
23/07/2024

[1280 x 1024] Quality beam splitter glass is essential for a teleprompter but there are many other applications it can be used for. I use it as a low-tech interrotron and it works beautifully.

5
07/06/2024

[Glass] It's sturdy and fits all the gear perfectly

5
27/04/2024

[12 VDC at 4 A] I have a PT3000 that came with a hook and loop attachment setup. I ended up using extra adhesive-backed hook/loop pieces to get it properly attached, and it never felt like it fit very well. This new hood with the magnetic strips attaches cleanly and has a better fit. I hate to disassemble and move the teleprompter, but this hood makes that job a bit easier. Recommended if you're still using the hook/loop hood.

5
30/11/-0001

[4:3] the packing is good ... even though it's vulome so it's not big but this is possible to maintain the safety of the glass. and I have received it safely in good condition.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

P2p Interview System With 19" Teleprompters & Cases

$14,997.00 $20,845.83

P2p Interview System With 19" Teleprompters

$13,497.00 $21,190.29

P2p Interview System With Dual 12" Teleprompters

$6,597.00 $9,433.71

P2p Interview System With 19" 3g-sdi Teleprompters

$14,097.00 $20,299.68

Handheld Interview Mic

$629.85 $850.30

Aver Wi-fi P2p Dongle For M15w & M70w

$89.97 $143.05

Sony A6000 Headshot Interview Kit

$3,311.49 $4,735.43

Dot Line 2-light Led Interview Kit With Case

$899.85 $1,124.81

Asus Vz24ehf 24 Inch Eye Care Monitor

$284.97 $436.00

Products You May Like

Tiffen 4.5" Round Pro-mist 4 Filter

$716.85 $996.42

Kramer Usb-c 3.2 Gen 2 Cable 50ft Black

$1,248.00 $1,772.16

Audix Ap41 Bodypack Wireless System 554-586 Mhz

$1,707.00 $2,099.61

Kessler Crane Second Shooter Pan Axis System

$1,899.00 $2,278.80

Alfatron 4k Ptz Camera 12x Optical Zoom Black

$4,799.97 $7,343.95