The robust Sunwayfoto T3650CM Carbon Fiber Tripod 63"from Sunwayfoto T3650CM Carbon Fiber Tripod 63"is a versatile, feature-rich carbon fiber tripod with a load capacity of 55.1 lb and a maximum height of 63". It folds to a compact 20.5" for storage or travel, and weighs only 4.6 lb.

The carbon fiber legs have water-, dust-, and sand-resistant sealed twist-lock joints for reliable use in harsh environments with a minimum of maintenance. The legs have independent spread and open to three locking angles, making it possible to level the leg set on uneven terrain. They achieve a minimum height of 3" for low-perspective angles and macro imaging. The tripod head platform has a ballast hook, and the included interchangeable 75mm bowl can be changed out within seconds without the need for any tools.

Load Capacity: 55.1 lb    Working Height Range: 3.5-63"    Folded Length: 20.5"    Interchangeable Platform and Bowl    5-Section Carbon Fiber Legs, Twist Locks    Weight: 4.6 lb    Platform Diameter: 72mm    1/4"-20 Accessory Mounts

• Independent leg spread
• Leg angles: 23, 55, 85°
• Interchangeable 75mm bowl
• Head platform with ballast hook
• 1/4"-20 accessory mount sockets
• Interchangeable spiked feet

Related Questions and Answers

Q: 1. What is the folded length?

A: The Sunwayfoto T2540CT Traveler-Series Reverse Folding Carbon Fiber Tripod Folds down to 17.7" / 45 cm.

Q: 2. Are these stackable? Thinking of a way to use them on a floor mounted 48” slider where using a handheld gimbal cannot be used in tightly confined areas.

A: While you could stack these tubes, you would end up losing stability.

Q: 3. I purchased one of these and the top came with a 3/8" to 1/4" adapter already installed. However, I cannot remove the adapter so that I can use it to mount a camera with a 1/4" screw mount. Has anyone else had this problem?

A: Yes, the threaded stud has a spring loaded 3/8" collar, when pressed down, reveals a 1/4-20" thread.

Q: 4. Do the legs, at least the lower sections, have measurement markings?

A: No.

Q: 5. Will this tripod hold a weight of a little over 10lbs without shaking or vibrating in the wind?

A: The Manfrotto MT190CXPRO3 Carbon Fiber Tripod is rated for up to 15.4 lb. So this can comfortably hold 10 lb.

Q: 6. Does the center column have a hook at the bottom for attaching sandbags?

A: no it does not

Q: 7. Can I fit this in it's bag with a Sirui K40 ball head and Acratech leveling plate?

A: Hi Hi RobertI bought this tripod along with Sirui K30 ball head but I cant answer your question yet because Im still waiting for my tripod to arrive to Iceland but Im super excited and Ill let you know once here

Q: 8. Hi would like to know if this head will fit on the 190x legs. Thanks

A: The base diameter of this head is significantly larger than the top plate of the 190x legs (80mm vs 60mm) so it will overlap. But it will attach. This head was designed with the larger 057 legs in mind.

Q: 9. Can I use a wimberly side kick with this?

A: The Wimberley Arca Sidekick Ball to Gimbal Head Adapter needs to be used on a ball head that has an Arca-style quick-release clamp. The Manfrotto MT190CXPRO3 Carbon Fiber Tripod does not include a ball head. You could add the Oben BC-166 Ball Head to the tripod then they could use the Wimberley Arca Sidekick. Here is the link: https://bhpho.to/3ZMirv1.

Q: 10. Does the low angle adapter come with the tripod as standard, or does it need to be purchased separately? I am buying this tripod solely because it will reach my eye height WITHOUT the center column raised. I don't want a centre column at all, in other words.

A: Manffotto low angle adapters are usually sold separately. It is not included in the box with this tripod.