Paired with your existing XLR-equipped preamp, the TASCAM TM-200SG Shotgun Microphone for Professional Audioshort shotgun microphone offers pro-type features and design for indie filmmakers, vloggers, and videographers on a limited budget. The included mic holder has a shoe mount and a 1/4" thread, allowing the versatility of placing the mic atop your camera or tripod stand. The compact and lightweight housing of the TM-200SG makes it an unobtrusive companion for your shooting rig.

The supercardioid condenser element of the microphone enables it to deliver focused sound pickup with far less background noise than the omnidirectional microphones usually built into cameras. Its 30 Hz to 20 kHz frequency response incorporates a gentle presence boost at around 7 kHz to enhance intelligibility. Plus, the inclusion of a switchable low-cut filter lets you easily control problematic bass buildup such as traffic rumble. The TM-200SG utilizes a balanced XLR 3-pin output connector and runs on standard 48 VDC phantom power.

For Indie Films, TV & Documentaries    Supercardioid Condenser Element    Phantom Powered    Switchable Low-Cut Filter    XLR 3-Pin Output Connector    Gentle Presence Boost at 7 kHz    Windscreen Reduces Wind Noise    Compact and Lightweight Housing    Includes Shoe/Tripod Mic Holder

The TM-200SG was designed to be heard, not seen. The balance of audio replication and small form factor mean this microphone will be the least of your worries while shooting in the field.

Thanks to the sensitive condenser capsule and supercardioid polar pattern, the TM-200SG microphone delivers a capture zone that's focused on what is in front of the mic while leaving unwanted sounds behind, making postproduction much easier.

Wind and environmental hum can reduce the quality of the audio and create headaches in postproduction. By utilizing the mic's natural-sounding low-cut filter, you're saving time downstream without cutting into vital frequencies you have captured.

Use the supplied foam windscreen to reduce noise from breezes and other sources of wind such as fans. The mic also comes with soft case and a mic holder equipped with a shoe mount and 1/4" thread.

Related Questions and Answers

Q: 1. dB audio sensitivity rating?

A: The TASCAM TM-95GN has a sensitivity of -39 dB at 1 kHz.

Q: 2. Does the gooseneck detach quickly from the base? Ideally for quick setup/teardown and transport

A: Chris M,As ANTHONY G indicated, the microphone simply locks and unlocks with a few turns of a screw ring located on the base of the unit.a href= http://www.tascam.com/product/tm-95gn/overview/ target= _blank http://www.tascam.com/product/tm-95gn/overview//aThank you for your interest in TASCAM products.

Q: 3. What ever happened to the TM-10LW?

A: It appears the white version of the Tascam TM-10LB Lavalier Microphone for DR-10L Digital Recorder (TM-10LW) may no longer be offered by Tascam.

Q: 4. Does this has black color version? and can i use it on Senheiser EW100 G2?

A: Item# TATM10LB is the black version. As far as I know, Tascam is using the same wiring configuration as Sennheiser. That being said, there is no way to guarantee compatibility with the Sennheiser wireless transmitters.

Q: 5. Will it work with pixel 6 pro with USB c?

A: Yes, the TASCAM TM-250U Supercardioid USB Type-C Condenser Microphone is compatible with Android devices which support audio over USB-C.

Q: 6. I have a TASCAM DR-05 without screw mount fir ext mic, is this lav able to properly plug into a non screw in inout?

A: No, the Tascam TM-10L mic has a locking connector and can't latch on to a standard non-locking input jack. You will want to use a mic with a non-locking plug such as the Polsen PL-5 Mini Omnidirectional Lavalier Microphone with 1/8" (3.5 mm) Connector (B&H # POPL5) or Microphone Madness MM-ML Micro-Lapel Omnidirectional Microphone (B&H # MIML). Please feel free to contact us through live chat or by phone if you would like assistance to select a compatible microphone to use with the DR-05 recorder. You can reach us by phone at 800-606-6969 or 212-444-6615.

Q: 7. Would this work with a Zoom H-1 recorder?

A: Thank you for your question. This unit has a locking 3.5mm connection that will not lock into the H1i i recommend using a regular (non-locking) 3.5mm microphone such as the Polsen OLM-10. (B&H # POOLM10)

Q: 8. Does it work with Tascam DR-40?

A: It will work with the DR10 if using an XLR adapter that will drop 48V phantom power to plag in power. Like this: https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html?sts=pi&pim=Y

Q: 9. Can I buy the windscreen and clip separately? I lost the two items but the rest of the microphone works well.

A: Yes, the metal windscreen is the Auray WLM-OLM2-S https://www.bhphotovideo.com/c/product/911884-REG/auray_metal_windscreens_for_olm2_me2_lavs.html And there are several clips that can be used: https://www.bhphotovideo.com/c/product/909492-REG/windtech_tc_6_set_of_three.html https://www.bhphotovideo.com/c/product/909493-REG/windtech_tc_7_lapel_mic_tie_clips.html

Q: 10. Can any other gooseneck mic from another brand work with the base ?

A: Yes, the base stand provided with the Tascam TM-95GN Desktop Gooseneck Condenser Microphone can be used with other gooseneck microphones that feature a similar XLR male output connector onboard.