The orange Rip-Tie 1/2" x 75' WrapStrap Orangeis a 75' roll of reusable cable wrap for convenient and secure cable management. It has has been successfully tested for a minimum of 200 release cycles to ensure reliable use over and over again. It is 0.5" in width and features hook-and-loop closure, and it can be cut in length as needed. Utilizing laminating technology to prevent the connecting part from coming off, the WrapStrap can be used for virtually all cables and wires with confidence.

Reusable Cable Wrap for Cable Management    75' Roll    Tested for Minimum of 200 Release Cycles    Hook-and-Loop Fastener

The hard side of the WrapStrap is called a molded hook.

The soft side of the WrapStrap is called a soft-knitted loop.

Laminating hook-and-loop technology is patented worldwide. Many budget alternatives are heat-bonded or united by using adhesive, yielding a connecting part that seems to come off easily. WrapStrap does not come off from the connecting part.

Related Questions and Answers

Q: 1. Would this also work with the Sennheiser ME2 mic? a href= http://www.bhphotovideo.com/c/product/217474-REG/Sennheiser_ME2_ME2_Lavalier_Mic_for.html target= _blank http://www.bhphotovideo.com/c/product/217474-REG/Sennheiser_ME2_ME2_Lavalier_Mic_for.html/a

A: It is not recommended for the ME-2 lavalier mice. Try this one - it is a better fit: WindTech TC-12 Dual Lavalier / Lapel Microphone Soft-Mount Tie Clips for 1 - 2mm Microphone Cable (2-Pack, Black) B&H # WITC12

Q: 2. I am having problems with it working with my Iphone 6s. How do I get it to work?

A: This microphone will not work with an iPhone. It is designed specifically for Olympus voice recorders. This adapter may work for you:The SC4 3.5mm TRS to TRRS Adaptor from Rode is designed to let you connect a microphone with a 3.5mm output, such as the Rode VideoMic, to smart devices with a 3.5mm TRRS input. It features color coded, gold-plated connectors, with gray indicating the TRRS connector, in addition to shielded construction. The SC4 is compatible with stereo microphones and combines left and right channels to a mono signal for TRRS compatibility.

Q: 3. will this work with ace xl head?

A: Yes it does

Q: 4. What is the diameter/width of the rope?

A: The rope in the Kupo Rope Ratchet Tie-Down is 0.4" in diameter.

Q: 5. Why two microphones on the same clip? Is this redundancy in case of failure? Stereo? Something else? Newbie looking to learn.

A: The Sennheiser MZQ 22 Double Tie Clip can be used for mounting either one or two lavalier microphones. The included mic holders that come with the clip are removable. There are a variety of reasons for using two microphones which could be for backup in case one mic fails or for stereo audio, or two mics can send separate audio feeds to two different destinations like two separate mixers, cameras, recorders, etc., or a combination of two devices which could be required for different applications. There is no set rule for how two lavalier mics can be used, but a double tie clip like the MZQ 22 is a very handy tool that will give you the option if the need for two microphones should arise.

Q: 6. Is this considered an M10 tie-down?

A: Yes, the OConnor Tie-Down for 08365 100mm Ball Base has an M10 connection.

Q: 7. Will this work with a 2.5mm diameter cable?

A: The exact diameter of this clip is not listed, this clip was design for Sennheiser MKE 2, MKE 102, MKE 104, or MKE Platinum series lavalier microphones.

Q: 8. I'm assuming these are fairly standard but would this work on a DV4 ii head? Seems like it has just a standard 3/8 Bolt

A: Yes, The Sachtler DV4 is a 75mm head and would work with the Sachtler 75mm Tie-Down Knob BH #SA75TD.

Q: 9. Would this work on a Miller CX2. I want to know if I can fit it on my manfrotto legs with a 75mm bowl?

A: We are only aware of the Sachtler Tie-Down Knob for Ace & 75mm Heads being compatible with Sachtler brand Ace and 75mm bowl tripods. Sachtler's accessories tend to be specific to Sachtler and often are not compatible with other systems.

Q: 10. Does it come with screw?

A: No, the Sachtler Tie-Down Knob for Ace & 75mm Heads does not come with screws.