Designed for precision stereo recording, the sE8 Omni Microphone Capsules - Matched Pairgives you two meticulously matched sE8 omni microphones capsules, which can be used in place of the cardioid capsules that come with sE8 microphones. The sE8 omni capsules have been engineered to provide a balanced, transparent, and natural sound as well as a detailed transient response, making these hand-made, gold-sputtered omnidirectional capsules suitable for recording individual instruments, ensembles, or an entire orchestra. When the capsules are paired with sE8 mic bodies, the resulting mics deliver inherently low self-noise for meeting the demands of high-resolution digital recording. They also accommodate maximum SPLs high enough to handle drums, and a dynamic range large enough to record triple-piano to triple-forte velocities accurately.

For sE8 Microphones    Omnidirectional Polar Pattern    Matched Pair for Stereo Recordings    Gold-Sputtered Small-Diaphragm Condenser    Excellent Transient Response    Handcrafted and Meticulously Matched

Based on the highly acclaimed sE8 cardioid pencil condenser, sE proudly offers an omnidirectional option with the sE8 omni. Featuring the very same sophisticated capsule backplate design and true condenser technology, the sE8 omni provides an authentic and transparent sound quality.

Every pair is handcrafted and carefully selected in the sE factory to ensure the best possible performance. With low self-noise and ultrahigh SPL capability, the sE8 omni is the perfect choice for demanding applications like recording orchestras, ensembles, and choirs as well as solo instruments, vocals, and percussion.

Every capsule is handcrafted and individually tuned in the sE factory with the highest attention to detail. The ultrathin gold-sputtered diaphragm delivers an impressive transient response that enables capturing even the smallest of nuances. With an ultra-precision electrode, the sE8 omni is optimized for superb linearity and natural sound, ensuring a consistently smooth and balanced frequency response.

As with all sE factory-matched pairs, every mic ending up in a matched pair configuration is meticulously hand-selected after strict evaluation by trained ears and the latest analysis tools, with measurements taken in an anechoic chamber to ensure the highest possible mic-to-mic consistency.

Related Questions and Answers

Q: 1. Can the capsules be interchanged for omnis? Confusing because the Sound on Sound review said they are fixed but I see omni caps in your inventory.

A: Yes, you can use the sE8 Omni Microphone Capsules - Matched Pair (B&H # SE8OMNICAPPR) in place of the cardioid capsules that come with sE8 microphones.

Q: 2. Does it have handling noise?

A: The Samson Concert 288 SWC288HQ6 Dual-Handheld 16-Channel True Diversity Wireless System has a low signal to noise ratio of 85 dB. With normal use, handling noise for the handheld transmitters should be minimal or not noticeable.

Q: 3. I see that the microphones are powered by AA batteries. What about the receiver? Can the receiver be run off of battery power, or does it need to be plugged into a wall outlet?

A: Hello, Thank you for contacting Samson Technologies. The receiver for this system runs off of a power supply that can connect into a wall outlet. This power supply is included within the unit. If you have any other questions or inquiries, please let me know at any time. Best Regards, James

Q: 4. Why do you need a match pair?

A: Hello Tom, A matched pair of microphones keeps them as accurate as possible for stereo recording techniques. If they are different, then the stereo image could potentially change. If you're recording in stereo, we highly recommend the matched pair.

Q: 5. Can I plug this into a 3.5mm mini input on my DSLR and camcorder with a Kopul LMT-100 adapter on the end?. https://www.bhphotovideo.com/c/product/885062-REG/kopul_lmt_100_lo_to_hi_impedance.html

A: This mic can not be directly plugged into the 3.5mm input of a camera since they require 48v to operate. If you did want to connect this to a camera, you would a mixer with an xlr input and phantom power such as this BH #SASRPAX1.

Q: 6. Does the omni capsule come included in the box or is that sold separately?

A: The RODE NT5 Cardioid Studio Condenser Microphone includes a cardioid capsule only. The RODE NT45-O Omnidirectional Replacement Capsule for Rode Microphones (B&H # RONT45O) is available separately.

Q: 7. I have two of these units installed in a 40' x 50' room connected via unbalanced outputs to a Dennon PA Amp. Everything works well with all 4 mics when testing the system in an empty room. Once they hold a meeting and fill the room with about 80 people, there is popping and cracking noises. They have shut done all but one of the mics and that seems to solve the problem. I even spread out the operating channels for the mics to prevent interference between the transmitters. Any suggestions as to the source of the problem?

A: Mine make popping sounds as well. I have used many brands in the past. I'm not a fan of the infra red system, it wastes time and they are still not clear. My Voco Pros work good, but that is a four mic rack system.

Q: 8. The question isn't why are 2 mics more expensive than 1, it is why is there a $100 premium over buying 2 separately. Is it because they are 'matched'?

A: The difference in cost between purchasing two Rode NT55 Compact Condenser Microphones with Interchangeable Capsules as opposed to the Matched Pair item can indeed be credited to the fact that the pair is matched, making them more ideal for recording as a stereo pair.

Q: 9. Why are my NT5 pairs creating some buzzing noise when the XLR cables are being touched? No matter what gain level it's at, same problem. (Btw, I'm connecting the pairs to the Tascam X8.) Will some better XLR cables help?

A: If buzzing noise occurs when you touch the XLR cables, it could be a problem with the cables and the shielding or a bad ground connection inside the cables. Try swapping out one cable at a time and see if it makes any difference. Keep the mics away from any fluorescent lights, computers, monitors, or other items that tend to hum. You can also try plugging your amplifier, mixer, recorder, interface, or other device that the mics are connected to or any other electronic items within the signal chain into a different power outlet. Sometimes the power line can be the source of the noise. But the first thing to check is the cables. If the cables are good and the noise is coming from the power line, you can use a power conditioner to help eliminate the noise. Please feel free to contact us directly by phone or through live chat and we can help you to troubleshoot.

Q: 10. I see that the mics are powered by AA batteries. What about the receiver? Can the receiver run off of battery power, or does it have to be powered by an outlet?

A: Hello, Thank you for contacting Samson Technologies. The receiver for this system runs off of a power supply that can connect into a wall outlet. This power supply is included within the unit. If you have any other questions or inquiries, please let me know at any time. Best Regards, James