Velvet Power 2 Ip54 Spot Led Panel 15°

Product Code: eq97651
Availability: In Stock

$11,508.75 $13,810.50

Qty

8 reviews Write a review

Description
Reviews (8)

The VELVET Power 2 IP54 Spot LED Panel 15°from VELVET Power 2 IP54 Spot LED Panel 15°is a weatherproof light source with a 15° beam angle. It features variable color from 2700 to 6500K and i/s dimmable from 0 to 100%. Onboard DMX allows you to control it remotely from a console, and its 90-264 VAC power supply permits worldwide use. It has a yoke with a 28mm Junior pin and a 16mm Baby receiver.

For Studio and Film/TV Production Output: 8900 Lux / 929 fc at 9.8' Color: 2700 to 6500K, CRI: 96/98 Onboard DMX/RDM, Passive Cooling 90-264 VAC, 50/60Hz 1-1/8" Junior Pin

Key Specs
Item Type	1x LED Light Panel
Included Storage Case	No
Photometrics	: 7441 fc / 80,100 Lux at 3.3' / 1 m* 826 fc / 8900 Lux at 9.8' / 3 m *Standardized Measurement Calculated Internally Based on Closest Distance
Color Temperature	2700 to 6500K
Color Modes	Daylight, Tungsten
Color Accuracy Standard	TLCI 98 at 3200K TLCI 96 at 5600K
Dimming	Built-In Dimmer • 0 to 100%
Front Accessory Mount	No
Power Source	AC to DC Adapter (Not Included) Battery (Not Included)
Battery Plate Type	2x V-Mount (Not Included) 2x Gold Mount (Not Included)
Battery	2x V-Mount Rechargeable (Not Included) or 2x Gold Mount Rechargeable (Not Included)
Input Power	24 to 35 VDC 90 to 264 VAC, 50 / 60 Hz
Power Consumption	190 W (Maximum)
Fixture Mounting	Support Mount 1x 1-1/8" Stud with 5/8" Receiver (Via Yoke Mount)
Light Fixture
Item Type	1x LED Light Panel
Included Storage Case	No
Photometrics	: 7441 fc / 80,100 Lux at 3.3' / 1 m* 826 fc / 8900 Lux at 9.8' / 3 m *Standardized Measurement Calculated Internally Based on Closest Distance
Color Temperature	2700 to 6500K
Color Modes	Daylight, Tungsten
Color Accuracy Standard	TLCI 98 at 3200K TLCI 96 at 5600K
Dimming	Built-In Dimmer • 0 to 100%
Cooling System	Passive
Expected Lamp Life	50,000 Hours
Beam Angle	15°
Built-In Flash	No
Umbrella Mount	No
Front Accessory Mount	No
Connectivity
Mobile App Compatible	No
Power & I/O
Power Source	AC to DC Adapter (Not Included) Battery (Not Included)
Inputs/Outputs	1x XLR 3-Pin Power Input 1x XLR 5-Pin DMX Input 1x XLR 5-Pin DMX Output
Battery Plate Type	2x V-Mount (Not Included) 2x Gold Mount (Not Included)
Battery	2x V-Mount Rechargeable (Not Included) or 2x Gold Mount Rechargeable (Not Included)
Input Power	24 to 35 VDC 90 to 264 VAC, 50 / 60 Hz
Inline Switch	No
Power Pass-Thru	No
Power Consumption	190 W (Maximum)
Mounting
Yoke Type	Manually-Operated Yoke
Fixture Mounting	Support Mount 1x 1-1/8" Stud with 5/8" Receiver (Via Yoke Mount)
Environmental
Operating Temperature	12 to 72°F / -20 to 40°C
General
Display	Yes
Materials	Aluminum
Dimensions	27 x 24.5 x 2.7" / 68.58 x 62.23 x 6.86 cm
Weight	15.5 lb / 7 kg

Related Questions and Answers

Q: 1. is there a reason this won't work on other gold mount powered equipment such as cameras?

A: The VELVETlight Smart AC 200W Power Supply for VELVET Mini 1, 2, and 3 (Gold Mount) is a high voltage power supply, the camera works on low voltage batteries which is why it may not support power delivery to your camera.

Q: 2. Country of origin?

A: The Nanlux Evoke 1200 LED Daylight Spot Light BH #NAE1200 is made in China.

Q: 3. Is there a charge capacity indicator, like a series of LEDs?

A: Yes this has an LED indicator on the side of the unit.

Q: 4. Can this be used to charge multiple devices - the NP-F battery plus a couple cell phones plugged into USB-A ports?

A: Yes the USB ports can be used to charge a cell phone or two.

Q: 5. can you use Gold mount Mount Batteries ?

A: Yes, but the following cable is needed in order to do so and gold mount batter must be d-tap able. Please review the following Litepanels Anton Bauer D-Tap to 3-Pin XLR Cable BH #LIPTXC • MFR #900-0024 https://bhpho.to/3SzBgid

Q: 6. What is the DC barrel dimensions on the Power Junkie?

A: The barrel is 2.5mm.

Q: 7. Suppose I recharge the NPF battery to wall power while using it to power my GH5. Where will my GH5 draw power, from the attached NPF battery or straight from wall power?

A: Passthrough power from the wall is not available sadly, and the battery will not power the GH5 if you have it connect to the main wall power, so I would recommend using either a D-Tap power source or using a dummy battery attached to a battery bank of sorts.

Q: 8. How does it mount?

A: The unit has a 1/4-20" thread to attach to a rig, a tripod thread or hot shoe of a camera.

Q: 9. I think the description is wrong. It says it rivals the output of a 1.2k incandescent fixture but it's output is advertised elsewhere as rivaling a 1.8k Par HMI, or a 2.5k Fresnel HMI?

A: According to the manufacturer's website, the Nanlux Evoke 1200 LED Light has a maximum power consumption of 1,200 watts. That being said, LED lights by design are more efficient than halogen PAR light fixtures or HMI light fixtures, and as such, they output more light while using less wattage compared to other light design types. As such, according to the manufacturer of the item, the output of the COB LED light chip used in the Nanlux Evoke 1200 LED light is comparable to that of an 1.8kW PAR or 2.5kW HMI Fresnel light fixture.

Q: 10. What is the size of the DC barrel plug? Is it 5.5mm (outer) 2.5mm (inner)? I cannot seem to find this info anywhere.

A: Dracast lists the powersupply for specific models of light and does nto list the size or type of connector.

Corey	25/09/2024
[50,000 Hours] Just what I needed. I would purchase again from BH. 5

Timmy	09/08/2024
[50,000 Hours] I have two of these powering different sets of pedals: one for guitar rig, and one for keyboard rig. They're the one thing in my rigs that I never have to worry about. Completely hassle-free, noiseless power. I wish they made one for larger Line6 multi-effects units, like the HD500. 5

Sahni	14/07/2024
[2700 to 6500K] Thicker cable than some cheaper power supplies. Works with Fender Pugilist Duel distortion pedal! The pedal can't be powered by batteries like most pedals, yet doesn't come with a power supply!: so this is a great way to power it. 5

Keithy B.	07/07/2024
[2700 to 6500K] Works as advertised and only takes up one spot (as the name implies). I'd definitely buy another if I needed one. 5

RotoTok	01/07/2024
[50,000 Hours] This couldn't be any quicker or simpler to install, regardless of pedalboard you're using. I've used it with a Pedal Train and Holey Board and it's very simple to use, particularly if you're using a brick-type power supply and need a few more leads. 5

Dan	27/06/2024
[Aluminum] I've purchased these before, for guitar pedals, but also as a power source for a small project. This instance was no exception... they're good power-supplies. 5

JM	03/06/2024
[2700 to 6500K] The only single option that I've found for what i needed. I would have otherwise had to have purchased 3 different items to do what this one can. Running wireless video and a wireless tally light. Makes for a slim set up for our roving rig. 5