The Edge Gig Bag for Dreadnought Guitar from Tanglewood offers 10mm lightweight foam padding and 600-Denier nylon fabric treated for water resistance to provide secure transport and storage for your instrument.

The black case offers gray and white accents and matching white zipper tabs for easy access. A side handle and padded back straps make it easier to travel between gigs and lessons, while the handy front pocket accommodates A4-sized music books.

10mm Lightweight Foam Padding    600-D Nylon Treated for Rain Resistance    Padded Back Straps for Comfortable Wear    Handle on Side    A4 Music Book Pocket    White/Gray Accents, White Zipper Tabs

Related Questions and Answers

Q: 1. Would you recommend using an additional laptop case/sleeve with this, or does the laptop compartment provide sufficient stability/protection for a thinner laptop?

A: For laptops how much protection is required is a matter of how you care for your laptop and risk tolerance. In most cases this should be fine.

Q: 2. Does it support msi H410M Pro Motherboard ?

A: This supports any motherboard with PCIe slots.

Q: 3. Can i record 4 tracks simultaneously by usb?

A: With both USB Out Source Select buttons in the up position, channels 1 through 4 will output via USB. This is from the ZEDi-10 manual, describing how the USB interface section works: A built-in 4 in, 4 out, 24-bit/96kHz USB Audio Interface allows for studio-quality recording direct from your mixer to your PC without the need of any additional equipment. This is class-compliant (plug-and-play) for Mac and iOS devices. (iOS devices require a camera connection kit). Simply connect a USB cable between the USB port on the mixer and the USB port on your computer or device. For Windows systems, driver software must be installed in order for it to work. The latest drivers and documentation can be found at www.allen-heath.com/downloads 1. MONITOR OUT is an unbalanced stereo line level output using standard RCA phono sockets. This could be used for connecting to external equipment such as monitor speakers or a phones/ in-ear monitoring system. 2. USB connector is a Type-B USB connector for multi-channel bi-directional audio streaming between the mixer and a computer and follows the high speed USB 2.0 standard. 3. USB OUT SOURCE SELECT buttons allow you to chose where the signal to the outputs of the USB interface output is taken from. M1 - M2 - AUX - FX selects the USB OUT source from channels M1, M2 and the AUX and FX buss outputs and has priority over the default M1 - M2 - M3 - M4 source select. M1 - M2 - L - R selects the USB OUT source from channels M1, M2 & MAIN MIX and has priority over the M1 - M2 - AUX - FX source select switch. If neither of these buttons are selected the default channel USB OUT source is taken directly from channels M1 - M2 - M3 - M4. 4. ST2 and ST3 to AUX send control the level of signal sent to the AUX OUT. This is useful for routing USB IN 1-2 and USB IN 3-4 to the PHONES or MONITOR OUT 5. ST2 & ST3 MIX rotary faders control the volume of the USB IN 1-2 or USB IN 3-4 signals into the MAIN MIX respectively.

Q: 4. Is this wifi card compatible with Dell Optiplex 7060 SFF?

A: Yes, the Intel AX200 Gig+ Wi-Fi 6 Desktop Kit is compatible with your Dell Optiplex 7060 SFF.

Q: 5. I can't remember the visual difference but i know some "keys" dont work on different connectors is it M.2 B or M key

A: Hi Time, the Intel AX200 wifi 6 Desktop Kit needs either M.2 Key A or E socket. It is possible to fins adapters if your motherboard does not have the required socket. Thank you for choosing Intel.

Q: 6. What is the size the width and the length

A: The Roland CB-BAX is 51" long and 14" wide. We do not have the depth.

Q: 7. Can this Mixer record individual inputs via USB?

A: The Zedi 10FX mixer allows you to record up to 4 channels via the usb connection.

Q: 8. I have a gigabyte ga z170-hd3p the m2 slot is M type, which pcie adaptor works for the intel ax200?

A: It should work for any M.2 type, but not specified by Intel. https://ark.intel.com/content/www/us/en/ark/products/201974/intel-wi-fi-6-gig-desktop-kit.html

Q: 9. I'm getting a Gigabyte H470 HD3 motherboard. The specs say "1 x M.2 Socket 1 connector for an Intel® CNVi wireless module only (CNVI)." But Intel's information on the AX200 doesn't mention CNVI, nor does the Gigabyte spec info indicate the actual M.2 slot size or key type. How can I tell if the AX200 will work with my motherboard, or if I need to find a different Intel M.2 module? Thanks.

A: Hi David, as you mentioned your motherboard requires compatibility with a CNVi module. The AX200 unfortunately is not compatible with your motherboard. You will need to find somewhere that carries the Intel AX201 wireless card as this is compatible with your motherboard. Thank you for choosing Intel

Q: 10. Is this card forward compatible with Windows 11?

A: Yes, this card is fully compatible with Windows 11.