The SoundSecure SS-800 Omnidirectional Micfrom SoundSecure SS-800 Omnidirectional Micis a line level omnidirectional microphone designed for security applications. It connects directly to an IP camera or recorder with line level audio inputs to send audio over your network to go along with captured video. This microphone will pick up audio from up to 12' away in all directions. Additionally, it can be installed up to 1000' away from cameras or recorders. The microphone's enclosure is designed for ceiling installation.

Line Level Omnidirectional Microphone    Picks up Audio from 12' Away    Designed for Ceiling Installation

Omnidirectional microphone with line level audio output

Connects directly into an IP camera or recorder with line level audio inputs

Can be installed up to 1000' away from cameras or DVRs

-38 dB sensitivity (±3 dB)

30 Hz to 15 kHz frequency response

60 dB S/N ratio

Related Questions and Answers

Q: 1. Is this the CG-800D that charges twice as fast? This is the only thing that comes to up with a search

A: Its a great charger, with time the contacts become lose.

Q: 2. In what increments will it display measured lux? Eg: 0-1999lx rounded to 1s place. 2000-19,990 to the 10s place etc. (Not range)

A: The Sekonic SPECTROMETER C-800 displays lux to the single digits. For example 2161 is a lux reading that it may show.

Q: 3. As an event video shooter our most challeging task is to record in uncontrolled light situations with multiple cameras and make them cut nicely in edit... with this meter will it allow us to know the most precise overall Kelvin temp of several ambient lights in a room and any magenta/green necessary adjustments? We have used grey cards but the cameras have crazy readings when we use the white balance setting based on those? specially yellow/green painted rooms and vivid green nature backgrounds...

A: This color meter can give you exact information based on the color of the light. Depending on where and how you meter relative to other lights you can get a combined reading or a reading per light. Color meters are more accurate than gray cards for setting white balance.

Q: 4. What is its Lux Resolution?

A: The Sekonic SPECTROMETER C-800 can read lux 1 to 200,000.

Q: 5. Will it work for cannon lp-e6 battery

A: No, contacts are on the wrong side for this charger. Works for the BP-808, 819 and 828 batteries

Q: 6. Does this meter have a function to allow the user to walk away from the device and record the highest light level?

A: In order that we may further assist you, please write telling us more about what you wish to to. prophoto@bhphoto.com.

Q: 7. What are the main differences between this one and the C-700-U? Also does C-800 give you F-stop values like a lightmeter? Or should I get a different light meter for that purpose?

A: This is a color meter. While it can measure illumination levels in lux and footcandles, it does not measure in f/stops, shutter, ISO etc, etc. You do need a light meter for that. The main difference from the 700 is that the 800 can measure more types of light. In particular, it is the only affordable, movie technician meter that can measure the new color standard, Spectral Similarity Index (SSI) which is more reliable than CRI.

Q: 8. Is there are any other indexes can be used as a basis for performance when use the strobe light except the CCT/LB/CC index?

A: Only the CCT/LB/CC indexes are available when measuring strobes.

Q: 9. Is this meter also a light meter measuring incident and spot?

A: The main function of this meter is to measure color, but it can also provide readings in foot candles.

Q: 10. How much is calibration? How often is it required?

A: This meter comes fully calibrated from the factory and does not require calibration on a regular basis.