Measuring 24" long and only 4mm thick, the BNC Male to Male 12G-SDI 4K Coaxial Cable Right-Angle 24"is long enough and thin enough to conveniently wrap around different parts of your rig so that it doesn't get in the way of your workflow. Right-angle connectors further make it easier to integrate into your rig, allowing you to connect to your gear with minimal physical interference. The cable is designed for 12G-SDI/4K applications to support data such as 4K ProRes RAW.

4mm Slim Design, Easy to Wrap Around    For 12G-SDI / 4K Applications    Supports 4K ProRes RAW    Right-Angle Connectors    75-Ohm Impedance

75-ohm impedance

VSWR (Voltage Standing Wave Ratio): 1.5 max

Frequency: DC to 12 GHz

Related Questions and Answers

Q: 1. Can I use this to connect to a MACBOOK PRO?

A: Yes this will allow you to connect any of the VideoMics with a standard 3.5mm TRS output directly into your MacBook Pro.

Q: 2. I just purchased an SC4 3.5mm TRS to TRRS adaptor hoping to connect my Apogee Element 88 to my iPhone 11. My signal chain looks like this - MacBook Pro - Apogee 88 - TRS RCA Cable - SC4 3.5mm TRS to TRRS adaptor - to Lightning to 3.5 mm Headphone Jack Adapter. The iPhone is not recognizing the mic. Is it possible to use SC4 3.5mm TRS to TRRS adaptor with and RCA cable line out?

A: Upon looking at the Element 88, we notice there are no RCA outputs on the unit. You may be referring to the 1/4'' outputs on the back of the unit. If this is correct, and the cabling is as you suggested with 1/4'' outputs from the ALT out, then technically signal should pass. You may need to look at your DAW outputs and ensure you are sending signal to the ALT outputs and not just the mains. An alternative to that many adapters would be this cable, used from the 1/4'' outputs, and connected right the the Apple lightning to headphone adapter BH #SEIPSUMTS3.

Q: 3. I need to send audio to my ipad to use with promtsmart which is a voice activated prompter app. Can I use this to take a feed from an audio mixer such as the Zoom F8 to go into the headset 3.5mm of the ipad pro? Would an audio xlr to 1/8 extension from the mixer work with this adapter?

A: I'm not sure because my use was for different equipment and applications.Sorry.

Q: 4. Can I plug my Rode mic into this converter and then plug this converter into my USB-C adapter?

A: Yes! exactly how you said it in that order.

Q: 5. What's the inner diameter (ID) of this barrel connector?

A: The Tilta 12V USB-C to 3.5mm DC Male Power Cable (Right-Angle, 15.7") offers a 1.35mm x 3.5mm barrel connector.

Q: 6. Has the compatibility with the iPhone 6S been worked out in the app?? Are there currently any issues with the app on an iPad Air 2 with the most current iOS?

A: It works fine with the iPhone 6s. I have tested it with the Rode VideoMic Pro and with a Sennheiser EW 112-p G3 wireless, using the Rode Record app and Hindenburg Pro and I've had no issues.

Q: 7. What's the difference between this adapter and the SC3 version?

A: This adapter is to allow a mic with a 3.5mm TRS end to go into a smartphone. The Rode SC3, is the opposite, so it would take a TRRS mic, such as the Rode SmartLav+, and allow you to connect it to a camera or audio recorder, with a TRS 3.5mm mic input.

Q: 8. Hi, I need an adaptor to plug in a stereo microphone into an Android device. My android device does record stereo through its internal mics. So I just want to record using an external stereo mic, will this adaptor be suitable for that purpose?

A: Hi, yes the SC4 is compatible with stereo microphones, however both left and right channels will be combined to a mono signal as is the standard with TRRS inputs, which only have one single mic input channel.

Q: 9. I have a Rode Video mic that I want to plug into Iphone, do I need to buy TRRS Female to Lightning Audio-Interface Cable for iPhone (3.2") to make it work, or will this Item solve my problem?

A: Yes, you need the Rode SC4 conversion cable and Apple adapter cable for connection to iPhone.

Q: 10. compatvel com a Blackmagic Pocket 4k?

A: The Tentacle Sync C08 Tentacle to BNC Cable is a bi-directional cable used to feed or accept a timecode signal between a Tentacle Sync timecode generator and a device with a BNC TC in/out port. The Blackmagic Pocket Cinema Camera 4K has a 3.5mm timecode input. The C08 cable will only work if you are using a timecode generator that has a BNC connector.