Designed to interconnect professional and consumer equipment, the Movo TCB7 XLR to 3.5mm TRS Adapter Cable 16"is an audio adapter cable with two XLR 3-pin female connectors on one end and a stereo 3.5mm TRS male mini plug on the other. Gold plating on the TRS mini plug enhances conductivity to maintain optimal signal transfer. The 16" cable length is ideal for short runs and keeping the wiring tidy. Use it to connect the stereo outputs of a mixer or media player to a 3.5mm input jack on a camera, PA system, or stereo receiver.

Dual XLR 3-Pin Female Connectors    Stereo 3.5mm TRS Male Mini Plug    Gold Plating on TRS Mini Plug    16" Cable Length

Related Questions and Answers

Q: 1. What adapters would be required to use the Rode Video Mic Pro (stereo) with a Tascam DR-40 and not go to mono?

A: Why not just connect 2 XLR ports on the mic to the 2 XLR ports on the recorder using simple XLR-XLR cables? Am I missing something?

Q: 2. Does this adapter covert phantom power to plugin power?

A: This particular adapter will not convert Phantom to Plug-in power, but the Rode VXLR Plus will: https://www.bhphotovideo.com/c/product/1358231-REG/rode_vxlr_mini_jack_to_xlr_adaptor.html

Q: 3. How does the mono signal from the 1/4" connect to the stereo 3.5mm plug? Are there summing resistors inside the cable or plug?

A: The Movo Photo WGA-1 Mono 1/4" TS Male to Stereo 3.5mm TRS Male Adapter Cable sums a stereo signal from the 3.5mm connector to a mono signal on the 1/4" TS, or conversely, sends a mono signal from the 1/4" to the stereo 3.5mm connection in a dual mono fashion.

Q: 4. If I am wanting to connect a Sennheiser Lavalier 3.5mm directly to my Zoom F3, should I get the VXLR or VXLR+?

A: The Sennheiser lavalier microphone requires a small amount of voltage in order to function, so you will want to use the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP), which will allow you to use phantom power from the XLR mic input on the Zoom F3 Portable Field Recorder and then convert it to the proper amount of plug-in power that the mic requires. The RODE VXLR 3.5mm TRS Female to XLR Male Adapter (B&H # ROVXLR) will only convert the plug on the microphone from 3.5mm to XLR, but it will not convert phantom power to plug-in power.

Q: 5. Can I use this to connect a non-powered mono lav mic (AZDEN EX503) to my mixer or audio interface?

A: Sure. The jack itself just provides connectivity (unbalanced to balanced). Looking at the AZDEN EX503, it should work.

Q: 6. Can I connect a JBL Lifestyle Can I plug in my JBL Quantum 300 Gaming headset to this adapter and plug it into an audio interface or mixer?

A: So that we may properly assist you, please contact via phone, email or live chat.

Q: 7. Attempting to connect iphone se to Irig Pre to VXLT to Galagy GT-V Trek. Will this work. And can I take the IRIG headphone out and connect to mixer for monitoring/recording? Thanks

A: We are not aware of this working in that case.

Q: 8. Will this work the Synco D2 shotgun microphone (needs phantom) plugged into a passive Beachtek audio adapter?

A: No, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable will not work with the Synco Mic-D2 Hypercardioid Shotgun Microphone because it has a male XLR connector and the mic requires a female XLR connector. The V-Link Adapter Cable is intended for use with a microphone that has a 3.5mm output and requires plug-in power, but needs to connect to an XLR input. This cable does not allow phantom power to pass through to the microphone. It has a built-in phantom power converter that converts phantom power to 3 to 5V of plug-in power. The Mic-D2 needs to connect to an XLR mic input that can supply 48V of phantom power for the mic to operate.

Q: 9. does it carry stereo signals through this cord? Thanks;)

A: Yes the Movo Photo MC1 carries stereo signal.

Q: 10. Will this work with Panasonic DMW-XLR1?

A: Yes if you want to connect a microphone with mini plug output.