The Kramer Plenum-Rated Active Optical DisplayPort Cable 33ftfeatures high resolution and data transfer rate. The cable is thin and flexible. It also does not require external power. The user experience is maximized with integrator-oriented features and the latest advances in DisplayPort 1.4 technology.

DisplayPort Male Connector on Each End    Supports up to 8K @ 60 Hz Resolution    No External Power Required    Up to 32.4 Gb/s Data Transfer Rate

Supports 3D, HDCP, EDID, HBR3, DSC, and 8K @ 60 Hz resolution

Supports up to 8K @ 60 Hz over long cable runs without the need for an external power supply or additional extenders

Up to 32.4 Gb/s data rate with 8.1 Gb/s/lane (HBR3) link rate

Supports up to 8 channels of 16 or 24 bits linear PCM and 32 to 192 kHz sampling rate

Powers the active units via the DisplayPort connector

4.8mm diameter

Low smoke & halogen free

RoHS 2011/65/EU compliant, CE/FCC

Related Questions and Answers

Q: 1. will this IR work on a Harman Kardon avr 320-i can't find an HE 1000 that is recommended?

A: I would think so, John. The original remote (or multi-function remote programmed by the original or downloaded IR codes) should pass right thru and into the IR receiver window on the front panel. Make sure that you have a power supply and connecting block to use this emitter

Q: 2. Can a cable of this length power devices that work off of bus power? For example, could I use it to connect a keyboard or mouse to a computer?

A: A cable of this length will be just fine as long as it's an active extension cable. This cable in particular will be able to support a mouse, keyboard, and even portable hard drives.

Q: 3. Does this cable work with the LG Monitor LG 38UC99-W?

A: We're afraid not. This cable is not compatible with that monitor. This is an active Thunderbolt 3 cable so when connected to a non-Thunderbolt 3 USB-C port it will only work at USB 2.0 speeds - which wouldn't support the bandwidth required for video. That specific LG monitor is USB-C, not Thunderbolt 3, so this active cable wouldn't be compatible. instead you need a USB-C cable at 3.0 or 3.1 speeds. https://bhpho.to/30VsxfP

Q: 4. Will this work with the Canon Rebel T7?

A: This Tether Tools TetherPro USB 2.0 Active Extension Cable (16', Orange) is an extension cable. It does not plug into the Canon Rebel T7. The compatible cable that will plug into that camera is the Tether Tools TetherPro USB 2.0 Type-A to 5-Pin Mini-USB Cable (Orange, 15') BH #TECU545. https://www.bhphotovideo.com/c/product/845393-REG/Tether_Tools_CU5451_15_4_6_m_TetherPro.html

Q: 5. Will this work with canon r5

A: This is a extension cable. It can be used to lengthen a USB cable past the normal limits.

Q: 6. Can I use the usb cable that came with the camera and do tethered capture in Lightroom.

A: Yes, you can use the Tether Tools TetherPro USB 3.0 Active Extension Cable (Hi-Visibility Orange, 16') BH #TECU3017 to extend the cable from your camera.

Q: 7. Is this Cable Compatible with Non-Thunderbolt USB C ports(both 10Gbps & 5Gbps) & it's Accessories, or will it act as an Normal USB 2.0?

A: If used with USB-C ports it will have the speed of the port plugged in to.

Q: 8. Is this cable still needed when shooting tethered thru a powered dock, like a Caldigit TS3 Plus or OWC Thunderbolt 3? Or would it be redundant/overkill since the dock is providing an active connection?

A: Yes in that case it would likely not be needed.

Q: 9. Any idea why this cable does not work with laptop but powered USB hub?

A: Some USB powered hubs do not work well with USB active extension cables.

Q: 10. is this the chord i want for the A7 or the male end?

A: Which a7? Either way, this is just the extension cable and will not fit in your device. You will want the male end, just make sure your camera has the correct USB3 port.