Equipped with a silent high-tension spring hidden from view and the ability to rotate 360°, the 512 AUDIO 512-BBA Microphone Boom Arm 4-Packfrom 512 AUDIO 512-BBA Microphone Boom Arm 4-Packoffers sleek, quiet, and easy mic positioning for podcasters, content creators, novice broadcasters, and radio show hosts. Its two arms allow up to 31.5" of horizontal reach, plenty to put the mic right where you need it. The 512-BBA's steel construction provides stability while supporting a studio or broadcast mic weighing up to 3 lb (including a clip/mount).

Since the 512-BBA is compatible with 5/8"-27 and 3/8"-16 threads, it works with most mic clips and shockmounts. It attaches to a desk or table via an extrawide C-clamp that utilizes an antiscratch pad to prevent damaging the finish of your worksurface. For nonpermanent setups, the 512-BBA can be fully collapsed to ensure compact storage between sessions.

Podcasting, Streaming, Broadcasting    C-Clamp for Surface Mounting    Internal Springs    31.5 Horizontal Reach    360° Arm Rotation    Fully Collapsible for Compact Storage    Touch-Fastener Cable Wraps    Supports Mics up to 3 lb    5/8"-27 Top Thread, 3/8"-16 Adapter

Related Questions and Answers

Q: 1. Before I place my order, can you tell me what additional accessories will I need to get started (aside from the computer)? Cables? Shock mount? Thanks!

A: The Audio-Technica Voice Actor Starter Kit ships with everything necessary to get started recording. The AT2035 mic ships with shockmount, and XLR cable for connection of mic to the interface is included as well.

Q: 2. Does this come with a USB cable so i can record to my computer?

A: The Tascam US-600 audio interface included in this kit will ship with a USB cable that will enable you to connect the unit to your computer.

Q: 3. What is the thread size? What is the depth of of the female thread?

A: The only female thread on this item is that of the screw-down mechanism (thumb screw) mentioned in the overview and clearly pictured. Those threads are M6x1.0 and about 17mm deep. They extend to the large central hole at the center of the cylinder but the end of the thumb screw does not bear directly against the boom arm. It instead bears against a plastic liner pressed into that central hole which prevents scratching the finish of the boom arm.

Q: 4. What is the diameter of the pin that slots into the clamping base?

A: The manufacturer has not specified diameter of the stem that fits into the C-clamp base for the 512 AUDIO 512-BBA Microphone Boom Arm.

Q: 5. Is it side address or top?

A: Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

Q: 6. IS there a deeper clamp available for desks with a beveled edge?

A: The O.C. White Ultima 4-Way Modular Clamp Assembly for Ultima ULP Microphone Boom (B&H # OCULPCLAMP) looks like it is deeper and heavier than the Samson clamp. The inside diameter of the hole on the O.C. White clamp is 17mm. Here is a link for the manufacturer's info page: https://www.ocwhite.com/product/ultima-ulp-clamp/

Q: 7. Can I use two K&M 21105 counterweights on the same boom arm? Is there a hole at both ends to allow for this?

A: yes. I am using 2 on one arm. and there is another trick. if your arms are just a bit thick,you can pop out the plastic liner. I like these, it's hard to find good counterweights these days.

Q: 8. Does this include the ATH-M20 Headphones?

A: No, the headline description of the kit is wrong, but the product list farther down is right. It ships with Polsen headphones. They're listed on the current set up as Polsen HPC-A30 Closed-Back Studio Monitor Headphones.

Q: 9. Regarding the 48" Boom Arm. Is each section or arm 48" long or is that the total length?

A: The total length of the MBA48 boom arm is 48".

Q: 10. It says Good for Voice Actors . Is it NOT as good for recording professional music?

A: Voice Acting or V/O (voice-over) work are just a few applications suited for this set-up. Musical applications are appropriate as well.