Zacuto Gratical Eye Micro Oled Evf Kit Power Sdi Cable

Product Code: eq98950
Availability: In Stock

$5,706.00 $8,616.06

Qty

14 reviews Write a review

Description
Reviews (14)

Designed for the Gratical Eye electronic viewfinder, this custom Zacuto Gratical Eye Micro OLED EVF Kit Power SDI Cablefrom Zacuto Gratical Eye Micro OLED EVF Kit Power SDI Cableenables you to both power the Gratical Eye from a D-Tap source and transmit an SDI signal via BNC. A switch is located on the D-Tap connector for powering the Gratical Eye on and off.

This single-cable solution features a single molded sheathing with two BNC, one 2-pin LEMO, and one D-Tap connector on free cable ends for neatly configuring your rig.

1280 x 1024 Resolution OLED EVF On/Off D-Tap to 2-Pin LEMO Power Cable BNC Video Cable 0.61" OLED EVF Supports Resolutions up to 1080p60 Zebra, Vectorscope, Waveform, Histogram Peaking, False Color, Test Pattern LUT Creation and Import 1/4"-20 Rosettes for Mounting

General
Length	30" / 76 cm
Connector 1	BNC (SDI)
Connector 2	2-Pin LEMO
Connector 3	BNC (SDI)
Connector 4	D-Tap
Packaging Info
Package Weight	0.24 lb
Box Dimensions (LxWxH)	5.65 x 4.6 x 1.3"

Zacuto Gratical Eye EVF

Related Questions and Answers

Q: 1. What is the battery, with the built in 15mm rails adapter, featured in the pictures?

A: It is called The Gripper and is made by the British company Hawkwoods. B&H does not have it listed and it does not seem to be currently available yet. a href= http://www.hawkwoods.co.uk/Gripper/ target= _blank http://www.hawkwoods.co.uk/Gripper//a

Q: 2. Does this work with the Panasonic Varicam LT?

A: Yes. The Zacuto Gratical Eye Micro OLED EVF, this item BH #ZAZGRE • MFR #Z-GRE will work with the Varicam LT. See below. The Varicam LT has this port that you can use to connect to the EVF. VF SDI terminal HD (1.5G)/3G-SDI: 0.8 V [p-p], 75 Ω

Q: 3. Does it still comes with Sdi/power cable? Thanks

A: When I bought mine the cables did come with the viewfinder

Q: 4. Does the Eye's tally light function with the Blackmagic's ATEM embedded SDI information (turns on when switcher is live to that camera)?

A: Can't confirm. I've been using the Eye with my FS7 only.

Q: 5. can this be used on s1H?

A: Yes, there is an HDMI input.

Q: 6. Is it really compatible to Kameleon Pro EVF? Thanks

A: Yes, the Zacuto LP-E6 Battery Pack Set for Gratical Eye EVF is compatible with the Kameleon Pro EVF.

Q: 7. Is this compatible with Sony A1?

A: No, the Zacuto Gratical EVF only has a single SDI input and there are no SDI OUT ports on the Sony A1.

Q: 8. Can the Eye be powered from the Ursa Mini Pro's 4-pin XLR side output (the same one that powers their own viewfinders?)

A: Yes, and here is the cable: Nebtek 4-Pin XLR Male to 2-Pin LEMO Bolt Power Cable (6') B&H # NEBOLTL2XLR4. There is also the option of powering from a d-tap if you wish to use the Eye on another camera that does not have a 4 pin XLR power connection. Zacuto Power & Video Cable (30 ) B&H # ZAZEPVC.

Q: 9. Hi.. can I use this with Phantom flex 4k camera ?

A: We are not familiar with Phantom cameras. However if that camera has an HDMI or SDI output which send out a signal that is up to 1080p at 60fps it should work fine. However this will not see any super fast slow motion frame rates.

Q: 10. I come from the world of ENG TV/video cameras and not cinema cameras, so I'm not as familiar with rosette mounts. If this mounts with a fixed rosette onto a monitor mount with its own fixed rosette, how does one easily rotate the EVF up and down?

A: Position the rosette before tightening.

Jarrad	28/09/2024
[0.24 lb] THIS IS PERFECT, IT'S JUST WHAT I NEEDED. IT ALOUD ME TO MOUNT MY ACT EVF PRO AND BALANCE MY RIG JUST RIGHT. 5

Andre H Brazil	14/09/2024
[BNC (SDI)] For photographers that wants to shoot with any camera possible. Could be a little bit smaller... maybe next generation! 5

Jon	21/08/2024
[D-Tap] I know this is meant for the Gratical, but I recently installed it on my Z-Finder and it works perfectly. 5

Nathalie	15/08/2024
[BNC (SDI)] I use it with the ZACUTO Kameleon. I've tried the +3 also, but it was too much magnifying. Be careful with the screw when you put this one back in, not too tight... 5

Alan	04/08/2024
[0.24 lb] I was using the LED screen with a view finder adapter, but it wasn't very good. I got this unit and the world became sharp to me. Easy to use, sharp picture, love the unit. 5

Jeffrey	27/07/2024
[BNC (SDI)] Zacuto has always been a manufacturer of high quality products, and the C200 EVF Recoil Pro V2 is no acception. 5

Brade R.	26/07/2024
[BNC (SDI)] Super sharp and great portable size (if you have the additional power). Unfortunately, it takes up an SDI port and if your camera has only 1 port, you may be limited in what you can do. I don't recommend this for a Panasonic EVA1. You won't be able to shoot RAW or use an external recorder over SDI and get camera menus/info. 5

Lukas	13/07/2024
[0.24 lb] Amazing viewfinder in a compact form-factor compared to others. I used it on a FS7 and now on the Komodo. A good quick-adjustable rigging solution like the Zacuto Axis Mini is a must, especially for doc shooters I think. 5

Jon	02/07/2024
[D-Tap] I recently purchased the +1 and +2 and went ahead and purchased the +3 to future proof my Z-Finder as my eyes get older. The +1 and +2 work perfectly on my Z-Finder and I'm glad to have this one ready to go when needed. For the money, it is a fantastic investment. 5

Camera Dept.	07/06/2024
[0.24 lb] If you've used an Alexa or a Phantom then you know the value of a good, sharp, viewfinder. False Color and Peaking is like wheels on a car for a viewfinder in my opinion and any car worth driving needs wheels, so their inclusion in the feature list of this VF, though elementary, indispensable. With That Being Said,... the inclusion of, 1D Lut support (.cube), Waveforms, Histograms, Trigger and T/C support for most, if not all Sonys Canons and Reds, fantastic form factor, build quality, great Loupe optics with Diopter and 1 stage Anti Fog built in, Additional Anti-Fog elements Included, sharp screen and Anamorphic Desqueeze for 1.33, 1.66, 2.0 for both 4:3 and 16:9 for most ratios, when allied to an intuitive, customizable physical interface, that's significant. More so considering the price. I bought mine on sale and at BH on special so the price paid at the the time is too low to actually quite comprehend. I've used VF's that cost more than 2 times the price of this Zacuto when it costs 1950.00 and have been thoroughly disappointed. I'm still slightly blown away at the value for money in this piece. It must be said that one should consider the Axis VF mount a required purchase with this item, as it's 1/4-20 thread on the Rossette. Bottomline: If you have a D-Tap/P-Tap and SDI out, get this VF if you need a VF for your VF needs. 5