Bring the open, consistent, and authentic sound of the OD505 active-dynamic wired handheld vocal microphone to your wireless system with the Austrian Audio OD505 WL1, a mic capsule compatible with Shure, Sony, and Lectrosonics handheld transmitters. The OD505 WL1 is expertly tuned to bring out the strengths of lead and background voices with minimal tweaks required from FOH engineers, technicians, or artists.

This supercardioid, active-dynamic capsule utilizes the company's Open Acoustic technology to ensure that your voice stand out in the mix. The proximity effect is optimized to ensure that the tonally open character of your voice is always preserved—at various distances from the mic and with changes in mic technique. Each OD505 WL1 capsule is hand-built in Vienna and measured and tuned in the in-house anechoic chamber.

Wireless Version of OD505 Handheld Mic    For Shure/Sony/Lectrosonics Transmitters    Supercardioid Polar Pattern    Active-Dynamic Capsule    3D Pop-Noise Diffuser    Metal Housing, Mesh Grille    Built in Vienna, Austria

• Sound of the OD505 active-dynamic wired handheld vocal microphone
• Mounts on Shure, Sony, and Lectrosonics handheld wireless transmitters
• Dual-capsule, active-dynamic design for consistent sound
• Accurately formed supercardioid polar pattern—over a wide frequency range
• Feedback-reducing performance
• Excellent control over the proximity effect—no change in the sound and in the feedback behavior when gripping directly on the microphone head grille
• Specially designed 3D Pop Noise Diffuser effectively reduces the impact of plosives.
• Rugged metal housing with mesh grille

Related Questions and Answers

Q: 1. Would this work with the old ATW-DA49 antenna distribution system?

A: Yes, it will work with your system, and most wireless systems within the 440-900 MHz range.

Q: 2. What is the output? There are 3 potential sources, the front & Rear mics and the external. Are they all just mixed to mono?

A: Saramonic Vmic4 Dual-Capsule Camera-Mount Supercardioid Shotgun Microphone has front and rear microphones, as well as a 3.5mm TRS input for an external microphone like a lavalier or similar mic. There is a single 3.5mm audio output which sends a combined signal with all of the mics summed to dual mono. Additionally, a headphone jack allows you to monitor the audio while recording.

Q: 3. Can this transmitter be used with XS wireless true diversity receiver?

A: No, the Sennheiser SKM 100 G4-S Handheld Wireless Microphone Transmitter with Mute Switch is not compatible with Sennheiser XS series receivers. This transmitter is only compatible for use with G series receivers operating on the same frequency band.

Q: 4. Will this fit a pair of AudioTechnica 2050 w/ their shock-mounts?

A: The Austrian Audio XL Aluminum Dual Case for OC Microphones is specifically designed with a custom-cut foam interior to fit OC series microphones and their compatible shockmounts. The dimensions of the Audio-Technica AT2050 Large Diaphragm Microphone and its compatible shockmount differ slightly from those of the Austrian Audio equipment, so as is, this case is not going to work unless you wish to recut the foam to fit the Audio-Technica components.

Q: 5. Does this have the same size as the Royer Labs RSM-SS251 ?

A: While we do not have any of these items in stock to be able to do a physical hands-on comparison, I can confirm that the Mojave Audio Replacement Shockmount for MA-1000 Mic and the Royer Labs RSM-SS251 Sling-Shock Shockmount both fit the Mojave Audio MA-1000 Signature Series Multi-Pattern Tube Microphone.

Q: 6. Does it’s gonna work with audio connect Mac and Switcher Studio app on iPad ?

A: Yes, the iRig Pre HD works with Mac and iOS. Unfortunately. we do not have any information on the Switcher Studio app. It looks like they suggest the original iRig Pre. Check with their team to see if they allow digital audio on iOS. If so, this should work great. https://support.switcherstudio.com/en/articles/3066145-using-an-audio-mixer-soundboard-with-switcher

Q: 7. Will this work with a gopro hero 5 black?

A: Yes, the Comica Audio VM10 PRO Mini Cardioid Digital/Analog Shotgun Microphone is compatible with the GoPro HERO5 Black when used with the GoPro Pro 3.5mm Mic Adapter (B&H # GO35MA).

Q: 8. will this work with a Sennheiser ew 100 G3 receiver?

A: Hi Louis - Evolution Wireless G4 is cross compatible with all previous generations, just be certain to purchase the correct frequency range and please note that the frequency presets won't be the same. This won't cause any operational issues, but you'll notice that the Bank.Channel info will default to the User Bank (i.e. U.1) when you sync your G4 transmitter to your G3 receiver.

Q: 9. Are these now made in China?

A: HI-X55 headphones are designed and manufactured entirely in Austria.

Q: 10. What if the amplifier does not have an RCA output -only speaker level out?

A: An amplifier that only has speaker outputs would not be compatible with this wireless system.