Camplex Duplex Lc To Lc Singlemode Fiber Cable 492.12'

Product Code: eq9918
Availability: In Stock

$446.85 $639.00

Qty

5 reviews Write a review

Description
Reviews (5)

Transmit your data at high speeds and at longer distances with the Camplex Duplex LC to LC Singlemode Fiber Cable 492.12'from Camplex. This 492.12' cable comes with an orange OFNR jacket that covers a 9μm core along with 125μm of cladding. Camplex has outfitted this cable with two LC duplex connectors, providing a pull-proof design. Furthermore, ceramic ferrule is used to offer precise alignment of the fiber cable as well as increased reliability.

9µm Core 125µm Cladding Duplex LC to Duplex LC Connectors OFNR Jacket Ceramic Ferrules

Key Specs
Connector 1	LC
Connector 2	LC
Cable Length	492.1' / 150 m
Fiber Type	Single Mode (Yellow)
Parameters
Connector 2	LC
Cable Length	492.1' / 150 m
Fiber Type	Single Mode (Yellow)
Core Size	9 µm
Return Loss	< 65 dB
Attenuation	0.3 dB/km @ 1310 nm 0.3 dB/km @ 1550 nm
Bend Radius	3.1" / 80 mm
Operating Conditions	-4 to 176°F / -20 to 80°C
Safety Certification	OFNR
Packaging Info
Package Weight	2 lb
Box Dimensions (LxWxH)	15.3 x 13.6 x 2.3"

Features a 9μm core and 125μm cladding

Duplex Singlemode Fiber

Ideal for patching singlemode backbones to high-speed network devices

Ceramic ferrules for long-lasting reliability and precision alignment

Used to connect patch panels and/or network devices

OFNR jacket complies with stringent building codes

Related Questions and Answers

Q: 1. Does this support single mode fiber as well as multi mode fiber?

A: The C2G LC to LC Male 50/125 Duplex Multi-Mode OM3 Fiber Optic Cable only supports multi-mode.

Q: 2. Hi, Just to be sure, this coupler is used to connect cables like this: https://a href= http://www.bhphotovideo.com/c/product/992948-REG/hybrid_fiber_systems_smd9_lc_lc_030_9u_125u_singlemode_duplex_lc.html target= _blank www.bhphotovideo.com/c/product/992948-REG/hybrid_fiber_systems_smd9_lc_lc_030_9u_125u_singlemode_duplex_lc.html/aCorrect? Thanks.

A: Yes that is exactly what the function of this product is.

Q: 3. Does this fido come with a single mode LC sfp already installed? Or do I need to purchase separately?

A: The LC connector is included.

Q: 4. Can this cable be used outdoors?

A: The short answer: yes, it can be used outdoors. Wasn't sure if you were talking about for permanent installation or temporary. For a more permanent installation or somewhere where there is a lot of foot or vehicle traffic, you'll probably want to get the tactical version of the cable instead. However, we have used these cables (in addition to various lengths of tactical cables) in all kinds of weather for interconnecting Blackmagic gear without problems (as always, do everything that you can to protect the ends from the elements).

Q: 5. Is this wire rated to be pulled in conduit underground?

A: Yes this would definitely be rated to run through underground conduit.

Q: 6. Can the cable be splitted so that the breakout part is for instance 100 feet and the rest is in a black jacket?

A: We can do a variety of custom options, but this cable if purchased as is will not allow you to adjust the breakouts.The overall jacket is tactical, once stripped from the outer jacket we have to build up each individual fiber with tactical furcation- for any custom needs you can contact us at sales@camplex.com and please copy your B&H representative for quotes. HOWEVER, we would not recommend a 100ft breakout- more so to utilize the existing tactical cable with LC barrel connectors and extending each 100ft with separate cables of a lower cost( either Riser rated jumpers, like our SMS9-LC-LC-030, or our tac 1 fibers.

Q: 7. Does this replace the Azden Lapel Clip F/EX503 Cat # EX503LC ?

A: Yes, the Azden LC-1 Lapel Clip can be used with all Azden EX series lapel microphones so it can serve as a replacement for the original EX503LC lapel clip that was included with the Azden EX-503 Lavalier Microphone.

Q: 8. Does this require both Optical Fiber ports to be plugged in or will it work off a single LC SM cable?

A: On the DIGITAL FORECAST Quad 3G Transmitter/Receiver Extender Kit over Duplex LC Single-Mode each fiber connection carries 3 SDI signals. The TX box would be 2 TX and 1 RX on each fiber. The RX box would be 2 RX and 1 TX per fiber. You would be able use a single fiber cable if you only need half the capacity of the DIGITAL FORECAST Quad 3G Transmitter/Receiver Extender Kit over Duplex LC Single-Mode.

Q: 9. r u the manufacturer? is it manufactured in USA or where? instead of online purchase can we go for commercial prpcess through TT or LC?

A: This product is manufactured in the US by Tactical Fiber Systems.

Q: 10. hello what kind of optical line with this?

A: This product uses LC Single Mode Fiber.

jeremy i.	27/09/2024
[OFNR] This unit is great and functions as both simplex and duplex feed thru panel. We are using this in our studio as part of our patch panel and video hub. 5

John	18/09/2024
[2 lb] For Tactical fiber cables, these are ultra light weight, but they do take a beating! Great Cables! 5

James	18/07/2024
[9 µm] These work perfectly with my BlackMagic studio cameras. 5

Christopher	05/07/2024
[< 65 dB] not much to say here. these work great with no issues. 5

John	08/04/2024
[9 µm] While I wasn't a fan of the cost at first, this is certainly a product where we are getting what we paid for. Cars and trucks of all sizes run over these cables all the time while we are trying to set things up, and after a year, the cables still look new- no signs of damage or even wear. They have sat outside for over a month at a time, in the rain and snow (minus the ends), and they just work great. 5