Kolari Vision Infrared Magnetic Clip-In Filter Sony E-Mount 590Nm

Kolari Vision Infrared Magnetic Clip-in Filter Sony E-mount 590nm

Product Code: eq99393
Availability: In Stock

$449.97 $638.96

Qty

12 reviews Write a review

Description
Reviews (12)

Featuring an aluminum frame with small built-in magnets, the 590nm Kolari Vision Infrared Magnetic Clip-In Filter Sony E-Mount 590nmfrom Kolari Vision Infrared Magnetic Clip-In Filter Sony E-Mount 590nmsecures magnetically to the camera mount, and your lens then mounts on top. The filter sits securely between the camera and lens. It's compatible with full frame Sony E-mount cameras.

This 590nm version requires a full spectrum modification to be made to your camera in order to function properly. This entails manually removing the camera's low-pass filter and replacing it with a clear filter. Once that's done, this 590nm filter will work as intended to block visible light up to 590nm from the light spectrum. (Kolari Vision can make the modification for you at a cost if you send in your camera to them.)

The filter material is glass. A small removal tool is included but not required. The compact tool looks like a guitar pick and is included just in case, as the filter can easily be removed by hand.

Magnetically Attaches to Camera Mount Sits Between Camera and Lens Requires Full Spectrum Modified Camera Aluminum Frame with Built-In Magnets Glass Filter

Parameters
Filter Type	Kolari Vision 590nm Infrared
Transmission Range	Blocks Wavelengths Below 590 nm
Size	Dedicated
Front Accessory Thread / Bayonet	No
Filter Material	Glass
Ring Material	Aluminum
Packaging Info
Package Weight	0.245 lb
Box Dimensions (LxWxH)	5.1 x 4.6 x 1"

Sony E-mount full frame cameras, including the a7, a7 II, a7 III, a7S, a7S II, a7S III, a7R, a7R II, a7R III, a7R IV, a9, and a9 II

Related Questions and Answers

Q: 1. will it fit on r3?

A: Yes, the Kolari Vision Magnetic Clip-In ND Filter for Canon RF-Mount Cameras (3-Stop) will fit on the R3 as well as on the other Canon bodies mentioned below: Canon EOS R Canon EOS R10 Canon EOS R3 Canon EOS R5 Canon EOS R6 Canon EOS R6 Mark II Canon EOS R7 Canon EOS R8 Canon EOS RP Kolari Vision EOS RP

Q: 2. Will it work on Sony APS-C bodies, as well?

A: The Kolari Vision Mist Diffusion 1/4 Magnetic Clip-In Filter for Sony E-Mount Full Frame Cameras is not compatible with the crop frame cameras.

Q: 3. zv-e1 can use this?

A: No, the manufacturer of the Kolari Vision Magnetic Clip-In ND Filter for Sony E-Mount Full Frame Cameras (6-Stop) does not list the Sony ZV-E1 Mirrorless Camera (B&H # SOZVE1B) in their compatibility.

Q: 4. Is this compatible with the R5ii?

A: Yes, the Kolari Vision Magnetic Clip-In ND Filter for Canon RF-Mount Cameras (3-Stop) is compatible with the Canon R5 Mark II camera.

Q: 5. Will this work with the Canon R5c?

A: Yes, the Kolari Vision Magnetic Clip-In ND Filter for Canon RF-Mount Cameras (3-Stop) is compatible with the Canon EOS R5 C Mirrorless Cinema Camera. The Kolari Vision Mag Mount for Magnetic Clip-in Filter (Canon EOS R5, R6, R6ii, R3, R) would be recommended for this, BH #KOMMPCR563 (https://bhpho.to/3u9AAb3). Though the filters will work in the R5C without it, the mag mount is highly recommended for best functionality, additional strength, and protecting the baseplate from scratches.

Q: 6. Will this work with Canon R8?

A: The Kolari Vision Mist Diffusion 1/8 Magnetic Clip-In Filter for Canon RF-Mount Cameras is compatible with the Canon R8 camera.

Q: 7. Will this work on a red Komodo?

A: The Kolari Vision Mist Diffusion 1/8 Magnetic Clip-In Filter for Canon RF-Mount Cameras has not been tested with the Red Komodo. But we do not see why it would not fit. So there is a good chance it will work.

Q: 8. Does it fits the Sony a7lV ?

A: Yes, the Kolari Vision Magnetic Clip-In ND Filter for Sony E-Mount Full Frame Cameras (3-Stop) is compatible with the Sony A7IV.

Q: 9. Does this fit A7C?

A: Yes it can fit the Kolari Vision Magnetic Clip-In ND Filter for Sony E-Mount Full Frame Cameras (3-Stop) but you need the Magnetic Mounting Plate for it to work in the a7c and the a1. That part at this time is only available direct from Kolari Vision.

Q: 10. Compatible with FX3?

A: No, the Kolari Vision Mist Diffusion is designed and made for the following units Sony Alpha A7 II Sony Alpha A7 III Sony Alpha A7R III Sony Alpha A7R IV Sony Alpha A7S III Sony Alpha A9 II

Federico	23/08/2024
[Aluminum] I decided on the 3-stop version because I was looking for a little help during sunny days and this has worked perfectly. The magnet slaps right on place and is easy to remove with anything that has a thin corner like a guitar pick or a credit card. No more ND filters dependent on diameter size! 5

Ujjwal	18/08/2024
[0.245 lb] Great filter. 5

Kirk	14/08/2024
[Dedicated] Works great on full spectrum cameras. Lets you get into the deep infrared on 720nm or higher converted cameras. 5

Anthony V	28/06/2024
[Glass] Best high quality filter for my infrared photography! 5

Joshua	16/06/2024
[Aluminum] I use a wide range of lenses, from cheap primes to large zooms, and my filter sizes vary across the range. With these clip-in filters, I can attach ND filters and shoot video with both RF and adapted EF lenses with no issues. This 3 stop ND was perfect for shooting a music video outside in sunny Los Angeles, and the 1/8 Mist had just a hint of glow to highlights without killing the contrast. I own all three 1/8 mist (0-stop, 3-stop, and 6-stop), and I have one in my camera at all times. Looking to try the 1/4 mist at some point to compare. 5

Joshua	11/06/2024
[Glass] I use a wide range of lenses, from cheap primes to large zooms, and my filter sizes vary across the range. With these clip-in filters, I can attach ND filters and shoot video with both RF and adapted EF lenses with no issues. This 6 stop ND was perfect for shooting a music video outside in sunny Los Angeles, and the 1/8 Mist had just a hint of glow to highlights without killing the contrast. I own all three 1/8 mist (0-stop, 3-stop, and 6-stop), and I have one in my camera at all times. Looking to try the 1/4 mist at some point to compare. 5

Andres	11/06/2024
[Dedicated] Infrared takes a hole lot of experimenting. If you convert a camera I would say make a Full Spectrum Conversion. After that a full set of filters to se your options. This filter is one of the most user friendly filters you can get for it. Have fun with it if you get it. 5

Ziomara	24/05/2024
[5.1 x 4.6 x 1"] It is a filter with the appropriate settings for use in both photos and videos, especially when the sunlight is not strong or the day is cloudy. Additionally, its internal use makes it convenient by eliminating the need to recalibrate a gimbal when removing or attaching it. It has a minimal impact on the white balance, which is very easy to correct. Highly convenient as with just one filter, I can use an infinite variety of lenses. 5

Michael	13/05/2024
[Glass] This filter is easy to put in and easy to remove. The mounting mechanism works really well and the all metal construction is very durable. The filter itself is high quality and works very well. Kolari customer service is also fantastic. 5