Ensure a secure and long-lasting connection between compatible devices with the Sescom XLM6-XLF6 Belden & Neutrik 6-Pin XLR Male to 6-Pin XLR Female Cable. The cable is designed for multiple applications including line-level, balanced analog audio applications. It's also an ideal choice for tube microphone applications, extension cables, dual-channel intercom systems, stage lighting, and professional stereo headsets with balanced microphones.

This 3' XLM6-XLF6 cable is terminated with a Neutrik NC6MXX 6-pin XLR male connector at one end and a Neutrik NC6FXX XLR 6-pin female connector at the other. Both connectors feature rugged, zinc diecast shells.

The XLM6-XLF6 utilizes rugged Belden RS-232 cable with an overall Bedfoil shield that provides 100% coverage and a semi-rigid PVC insulation to ensure a cable run that stands up to your environment. The cable offers excellent chuck strain relief to avoid shorts due to strain. It is assembled in the USA.

Dual-Channel Intercom, Stage Lighting    Tube Mics, Extension Cable    Neutrik Pin Configuration    6-Pin XLR Male to 6-Pin XLR Female    8 Conductor, 24 AWG, PVC Jacket    Rugged Belden RS-232 Cable    Length: 3'    Assembled in the USA

• Length: 3'
• Long-lasting and dependable 6-pin XLR Neutrik NC6FXX female/NC6MXX male connectors
• Rugged Belden RS-232 cable
• 8 conductors, 24 AWG, PVC jacket
• 24 AWG stranded tinned copper drain wire
• Tinned copper conductors
• Overall Beldfoil shield (100% coverage)
• Excellent chuck-type strain relief
• Rugged zinc diecast connector shells
• Semi-rigid PVC insulation
• Lifetime mating cycles: 1000
• Insertion/withdrawal force: ≤ 20 N
• Nominal cable diameter: 0.224"
• Bend radius: 2.25"

Related Questions and Answers

Q: 1. When line-in is plugged into Sony FX30 (1/8" plug), volume control has no bearing. Does this cable help in any way?

A: No. The Remote Audio Unbalanced Adapter Cable 3.5mm RA TS Jack to 3-Pin XLR Male with 40 dB Pad (18") would typically not be used for connection to a camera's 3.5mm mic input since it has a male XLR connector, not a female XLR connector. A cable with a female XLR connector would be used when going out of an XLR output. This cable would be used to connect from a 3.5mm TRS line output to an XLR mic input.

Q: 2. will this work with Arri Artemis 2?

A: The Nebtek 3-Pin Fischer Male to Female D-Tap Cable (24") can connect to the 12V 3 amp Fischer 3-pin on the ARRI ARTEMIS 2 with 1.8" Standard Post (Basic Set).

Q: 3. Can this be used to connect crown 311 headset microphone to a senheisser bodypack

A: Our cable is wired straight thru (1 to 1, 2 to 2), with pins 3 & 4 bridged with a buss wire to the sleeve of the 3.5mm TRS. You will need to confirm the pin configurations of the Crown headset and Sennheiser bodypack to confirm compatibility. Thanks!

Q: 4. Will this work with the Canon R-5?

A: No, the Rollocam Camera Trigger Cable with 2.5mm Male to 3-Pin Female for Canon EOS Cameras is not compatible with the Canon R5.

Q: 5. Can all inputs and outputs be used at the same time without losing any sound power?

A: The Sescom SES-XLR-RGAB2 is an A/B switch, so only one output can be active at one time.

Q: 6. will this cable work with Lectrosonic 5 pin female mini-XLR?

A: No. Please contact us for assistance to find the correct cable for your application. We will need to know what devices you will be using the cable to connect. You can reach us by phone at 800-606-6969 or 212-444-6615, or contact us through live chat on our website and we will be happy to help you.

Q: 7. I want to use a hand mic with a movo wireless. Should I use a trs or ra cable?

A: "TRS" refers to the specific wiring of a connector, whereas "RA" (right angle) only refers to its orientation and does not affect the signal otherwise. If your MOVO wireless has a 3.5mm TRS microphone input, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable (10') would be a good choice for connecting a dynamic microphone.

Q: 8. Are there replacements for the non ear piece cushion?

A: There are currently no replacements available for the small cushion on the Senal SMH-1010CH Single-Sided Communication Headset with 5-Pin XLRM Cable for Telex System.

Q: 9. Is the TRS end wired for stereo unbalanced or mono balanced?

A: The DigitalFoto Solution Limited Right-Angle 6-Pin Female LEMO to 3.5mm Male TRS Audio Cable for ARRI ALEXA Mini LF is intended for stereo, line-level audio input.

Q: 10. Will this 4 pin mini XLR connect into the 4 pin TA4F of the Shure SM31 fitness headset?

A: No. The conversion to 3.5mm will not provide the required power to the SM31 Headset Mic.